Just found this reel in my garage after must be 25-30 years. Wasn't even looking to use it really but after watching your video I think it may see another day on the lake. Thank you for posting this.
@2ndChanceTackle
5 ай бұрын
YW - I hope you can give your reel a 2nd Chance - Dennis
@TheRealFraen
14 сағат бұрын
hey thanks for the video! i’m working on my dads reel right now just trying to get a better understanding of it. he’s a paramedic first responder and he’s been going through a tough time with work, so fishing is coming back.
@2ndChanceTackle
14 сағат бұрын
Thanks for the note. If you run into any problems, please send me a note to my email 2ndchancetackle@gmail.com and I will be happy to help him out with the reel - Dennis
@Zoregman
Ай бұрын
Got this reel passed down from my grandpa and it was in rough shape, thanks!
@2ndChanceTackle
Ай бұрын
That is awesome! - Happy to help - Dennis
@bernarddeyoung8893
7 ай бұрын
Thanks Dennis I appreciate your attention to detail. I was watching this video while repairing my Ryobi mag4. I was having trouble with the anti reverse and you solved my problem. Thanks again
@2ndChanceTackle
7 ай бұрын
Glad I could help! Thanks for the note and for watching - Dennis
@michaeljones4012
Жыл бұрын
Thanks Dennis, this helped me a lot today in repairing a Shimano Bass One Mag B1-RM reel that belongs to a friend. There here was only a single spring in it and it was in the wrong location and on the wrong post. Cleaned, lubed and cut down a spring to make a pair and it works great now. He'll be very happy. Thanks for all your tutorials, they've helped me a lot over the years!!
@2ndChanceTackle
Жыл бұрын
YW - I am sure your friend will appreciate your work, Best wishes - Dennis
@jimsummers570
Жыл бұрын
Thanks! Dennis, just wanted to publicly thank you for your help in getting my old Shimano Black Magnum baitcaster back together again! You steered me in the right direction immediately and together we got her working again, Thank you! Jim
@2ndChanceTackle
Жыл бұрын
THANK You - best wishes - Dennis
@stevecarrero4120
2 жыл бұрын
I love to see these vintage Shimano reels being serviced. Thanks Dennis!
@2ndChanceTackle
2 жыл бұрын
YW Steve. Best wishes - Dennis
@trentgray5483
Жыл бұрын
I found this reel in my local lake and your video really helped me bring it back to life thank you
@2ndChanceTackle
Жыл бұрын
That is awesome! Glad to hear it has a 2nd Chance! Dennis
@trentgray5483
Жыл бұрын
@2nd Chance Tackle I woke up this morning and now it seems like the main gear seems to only work half the time do you by chance have any advice?
@6thmichcav262
2 жыл бұрын
You found one of my favorite reels for ice fishing. The drags are smooth enough to fight an inter loping pike on 2 pound line, and the plastic body isn’t as cold as a metal reel. I have four of them. They also work fine for warm weather fishing.
@2ndChanceTackle
2 жыл бұрын
They sure do. Glad you enjoyed the video - Dennis
@rogermadrange1724
2 жыл бұрын
I wanted to see your fish it! Shimano makes great reels. Nice to see this older one is working perfectly after so long.
@2ndChanceTackle
2 жыл бұрын
Yes it is. I am good at the repair videos. Not so good a filming me fishing. There are a lot of folks way better at it than I - Thanks - Dennis
@bobbymiller1672
2 жыл бұрын
I love the Daiwa reel Dennis serviced for me
@2ndChanceTackle
2 жыл бұрын
Thanks for the shout out Bobby! Best wishes - Dennis
@cjmoundalexis2567
2 жыл бұрын
Hi Dennis, What a great effort and performer !! Especially enjoyed the zoomed in, closer video look. Must admit I reviewed where that handle spacer belonged several times when you were disassembling it. Sure enough it "almost" snagged you on the way out !! Nice recovery... Great minds must think alike ?!?! Let me know if run low on lures. Have fun fishing... Best Wishes, Cons
@2ndChanceTackle
2 жыл бұрын
Thanks Cons. I am preparing a shocker - replacing the board! Be well
@michaeloconnell2002
2 жыл бұрын
Great video I hope to see the Un boxing of the package I’ve sent you with the gifts
@2ndChanceTackle
2 жыл бұрын
Coming soon!
@user-wj2ce8bi6u
Жыл бұрын
Drag does work completely even though star drag is tighten.
@user-wj2ce8bi6u
Жыл бұрын
@user-wj2ce8bi6u 6 seconds ago Drag does not work completely even though star drag is tighten.
@2ndChanceTackle
Жыл бұрын
You may need to replace the drag washers if they are worn or broken
@joycedimaggio3816
2 жыл бұрын
I was just looking at those on line. Alittle more detail.
@2ndChanceTackle
2 жыл бұрын
You should be able to get a good deal on these. There were a lot made and a lot are still around
@garyclune7258
2 жыл бұрын
I have a Shimano Bantam TX Mag which I suspect has pretty much the same innards as the reel you've profiled here. I'm curious to know if the bushings in this reel could be replaced with bearings. I plan to use my reel for dropshotting for bass and would like to make it a little smoother. Nice job on the video, I'm now a subscriber.
@2ndChanceTackle
2 жыл бұрын
In theory, it should. Just be exact with measures when ordering the bearings - Dennis
@dylanschiffman95
Жыл бұрын
I am curious if you ever went about changing out those bushings. If so, what did you order, and what were the results?
@toddcallen3279
Жыл бұрын
Just bought a used one for $10 that seems to be in great condition except that the mag brakes dial will not move. I've never worked on anything complex, and I know that I would destroy it if I tried to take it apart. Is there some trick I don't know to get it to move?
@2ndChanceTackle
Жыл бұрын
I think it is probably rusted in place. The steel ring that the magnets connect too and brush against have a habit of rust. You could remove the side plate and try to free it with a rust buster or penetrating oil - Dennis
@tylerwcisel2832
7 ай бұрын
Hi dennis i have this same reel i went to service it before the season began and now if my drag is too lose when i reel it neither the spool will spin and worm gear wont move the eye
@2ndChanceTackle
7 ай бұрын
Something is not right in the reassembly of the drag system of possible how the A/R was reinstalled. You will need to recheck your work against the schematic - Dennis
@anthonycaban738
2 жыл бұрын
Hello, do you know the difference between the Bantam 1000 and the Bantam 1001? I own a 1001 from when I was a kid, I only used it a few times and gave up on bait casting! But I’m interested in trying it out again and plan on starting out with my 1001 to see if bait casting is even for me or not before I go and spend the money on a modern setup. Thank You!
@2ndChanceTackle
2 жыл бұрын
The 1000 is a right hand crank and the 1001 is a left handed crank.
@jcesarfilho
5 ай бұрын
What is the drag value of this reel? I have one just like this in full use! Thanks
@2ndChanceTackle
5 ай бұрын
I am not sure, but my guess would be 8-10 pounds
@gzo313
2 жыл бұрын
Question, do you recommend using grease on the spool shaft instead of an oil? Wasn’t sure if an oil would help with casting performance.
@2ndChanceTackle
2 жыл бұрын
You can use either. I generally use a light coat of grease, because oil evaporates quicker and I have seen a lot of problems with pinion gears frozen to the spool shaft, so I like to make sure there is sufficient lubrication there to prevent it from happening. You are correct, oil will help casting distance a little more, but I go with the grease trying to avoid the bigger problem - Dennis
@chrismccarta202
2 жыл бұрын
I have that fishing reel in my collection
@2ndChanceTackle
2 жыл бұрын
It's a nice one. I hope you are still fishing with it - Dennis
@chrismccarta202
2 жыл бұрын
@@2ndChanceTackle no sir it's just sitting in my collection maybe one day I'll put some line on it and fish it!
@user-dr8cy9ed6n
Жыл бұрын
My reel want reel in sounds stripped out
@2ndChanceTackle
Жыл бұрын
If it sounds like that, it probably needs new gears. No way to tell unless you remove the case and take an inside look
@brianwilson4184
7 ай бұрын
Like this video a lot very helpful .. I sent you at question about this reel to your GMAIL.
@2ndChanceTackle
7 ай бұрын
Thanks - I think I answered you. If not, please resend - Dennis
@brianwilson4184
7 ай бұрын
I didn’t see your answer , but I think between your video & YoungMartins I got it figured out. Thanks and keep the old Shimano videos coming
@Rich-mz7no
6 ай бұрын
Thank you for this video, a co worker gave me this reel. It’s been in his garage since he bought it. Needs some maintenance but still has alot of life to it. This will definitely help me restore it 👍🏻
@2ndChanceTackle
6 ай бұрын
Glad to help you give your reel a 2nd Chance. Best wishes on the service - Dennis
Пікірлер: 55