Um dos melhores vídeos de montagem que vi até hoje, parabéns que Deus te abençoe sempre, sucesso em suas jornadas!
@kylelibby2241
4 жыл бұрын
THANK YOU! I screwed up putting my curado back together and realized I put one of the drag washers on the wrong way. the drag was basically not working. you saved me!
@bayoureels1983
4 жыл бұрын
Awesome man. Glad the video helped you out!
@diverdoyle
5 жыл бұрын
Thanks for the break down ... it’s kinda hard to see what your doing due to black on black items and over head lamp may help
@bayoureels1983
5 жыл бұрын
I agree, I am struggling with lighting and the parts being visable in a clean way. I bought a better camera which has helped. I really appreciate the feedback!!!
@diverdoyle
5 жыл бұрын
Bayou Reels it may sound crazy but maybe goodwill/ thrift shop may have a decent quality lamp but really cheap cost
@bayoureels1983
5 жыл бұрын
@@diverdoyle I have a couple desk lamps, but the combination of trying to light everything up while not creating shadows, as well as a very cheap camera on these videos has been a struggle. Watch the recently posted set of videos for the Calcutta and you can see the difference a better camera made, in my opinion. And as always, thanks for the feed back, keep it coming, please.
@TheChuck
3 жыл бұрын
Well done! Thx!
@brandonjaccard547
2 ай бұрын
This is a stupid question I have a curado 200xg and they discontinued the drive shaft do I have to use the same one or can I use any driveshaft on my reel
@cincinnatiking8008
2 жыл бұрын
I want to buy some good screwdrivers for reels. Do you know what size I would need?
@redfish4009
3 жыл бұрын
Hey man what would cause the star drag not to click anymore when tightening after assembly?
@redfish4009
3 жыл бұрын
Found it. Spring fell out.
@ianroddie357
4 жыл бұрын
I have a question when I wiggle my handle there is slight play and I think it is the driveshaft being a little loose it isn’t the handle I checked and it’s snug
@bayoureels1983
4 жыл бұрын
Im assuming your question is what is causing the wiggle? If you did not take it apart, then that wiggle is probably fine. The drive shaft may have some play in it given the tolerances. If you HAVE taken it apart, you maybe didnt tighten the screws/plate that hold the drive shaft in place. You may also have reassembled the drive shaft improperly, meaning things being out of order from the c-clip to the gear, the things in between might be out of order.
@ianroddie357
4 жыл бұрын
Bayou Reels ok thank you I havent taken it apart yet fully I only took off the handle and the star drag and when I wobbled the drive shaft it had a slight play up and down with it I just received this reel to the play was straight out of the box
@ianroddie357
4 жыл бұрын
Bayou Reels thank your for responding
@bayoureels1983
4 жыл бұрын
@@ianroddie357 then it should be fine. Some play is normal since having some flex will prevent it from snapping. If its fresh out the box I most def would not worry about it. And some of that play will go away when you reassemble the star drag and handle.
@milinowy5643
4 жыл бұрын
hey i found ur video very helpful, but i got problem with mine, im throwing baits for pike like from 20 to 80/90 grams, everything was amazing, reel were like butter, but now i can feel gears, like when im winching i can feel gear teeth. I dissasembly it to check waht is going on but everything looks perfectly fine for me, gear is no damaged etc. but main pinion of gear is moving when im toutching it with my finger, should it be like that? winching power is same just i feel uncomfortable fishing with it cuz of "buzzy" feeling due to gear. Do you know what might it be? sorry for my english. I noticed one more thing: when i spin my reel wormgear feels rough in one place i mean at the right corner, but it is only there at every other place at wormgear it is fine. Could you help?
@bayoureels1983
4 жыл бұрын
The pinon gear will be "loose" or moves when you touch it (while disassembled) because the spool shaft is what usually keeps it in place. When disengaging/reengaging the reel, the pinion gear raises and drops sliding along the spool shaft. You may need to clean and re-grease the gears to eliminate that grinding feeling. 80 to 90 grams is a little heavy in my opinion. We do not have pike so I dont pike fish to really know how thats done. You may be working on the high end of the reel's limits potentially. I would also check the spool shaft to see if it has a slight bend in it. The pinon gear and main gear can be hard to tell if they are getting worn with no brand new gear to compare it to side-by-side. This could be an issue as well. Your english was just fine. Worm gear: Your pawl is getting worn out if it feels rough in the corners. Eventually it will get stuck on one side of the worm gear and not move back and forth. I would suggest replacing it.
@wa7293
5 жыл бұрын
Good video. Just wondering, I recently dropped my spool on the floor and now there is a small dent in the edge of the spool, the reel seems to to functions as usual and the spool seems to spin freely, do you think this will cause a problem in the future?
@bayoureels1983
5 жыл бұрын
Probably not. Freespool it as fast as you can an listen for any scrapping or rubbing or ticking.
@redzuanhashim1193
2 жыл бұрын
what oil are you using?
@MichiganSam962
4 жыл бұрын
Are all the spacer washers the same size?? Lost one cleaning the reel
@bayoureels1983
4 жыл бұрын
No they are not all the same size in that they vary in thickness. There is potentially a set of spacer washers that go on the drive shaft to properly place the drive shaft sleeve in the ARB as well as not have the curved washers (that are outside the side plate but under the drag star) press down on the ARB. Those are however the same ID and OD. f you haven't already, please consider subscribing to the channel. It really helps me out.
@MichiganSam962
4 жыл бұрын
Bayou Reels I already subscribed love the content thank you for the help 🙏
@1990cig
4 жыл бұрын
I have 2 brand new Curado Ks one I can wiggle the handle/driveshaft slightly in and out not side to side, the other one is tight. Do you have any insight as to what might be happening? Could it be missing one or both of the spacer washers possibly?
@bayoureels1983
4 жыл бұрын
It could be a spacer washer issue. It also could be that your handle retaining nut is not tight. There is also a "tension washer" thats sort of oval shaped that goes between your handle and drag star. If they are brand new out the box from a retailer that should not be missing. But overall the entire thing might have a very slight in-and-out play. If they indeed are brand new, I wouldnt be too concerned unless the reel starts to act up. Tolerances in reels are pretty tight, so something like material expansion/contraction. Unless the reel doesnt function properly it should be fine. Hard to say without it in my own hands, so keep taht in mind. If it concerns you enough, then take it to your local reel service shop or even call Shimano if you have your receipts. If you haven't already, please consider subscribing to the channel. It really helps me out.
@1990cig
4 жыл бұрын
@@bayoureels1983 Thank you so much for replying so quick! I removed handle and drag star last night. When I grab the driveshaft I can move it in and out just slightly but enough where it makes a noise. The other reel has no play at all so that's why I was a little concerned.
@bayoureels1983
4 жыл бұрын
@@1990cig Ok then it isnt a spacer washer issue if it still does it with all that taken off. The two screws (video at 20:52) might be loose, but that would be strange if you bought it new from a retailer. It is conceivable that one reel has SLIGHT play and one doesn't, based on tolerances, but only slightly. Give Shimano Fishing USA customer service a call (1-877-577-0600) and verify if it is an issue or not. If you have the receipt they will most likely send you a shipping label to have it sent to a Shimano service center for free. Wish I could diagnose it better for you but without having it in my own hands, I can really only suggest stuff to try and see if it will fix it. At least you were specific. I get calls and messages that are literally "Hey my reel doesn't work, whats wrong with it?" And they cant tell me what it is doing wrong/not doing right. "Its broke".
@1990cig
4 жыл бұрын
@@bayoureels1983 Thank you sir! I was thinking maybe it might be missing one of the spacer washers you put on before the e-clip at 19:24 in the video and that's allowing a little end to end play. It's not terrible and if they both had it I probably wouldn't worry about it at all.
@bayoureels1983
4 жыл бұрын
@@1990cig I just thought of something else. There is a potential spacer washer that would be between the drive shaft bearing and the retainer plate. They are very thin but could make that wiggle go away. Not every reel gets the same number of spacer washers in all the places, so even your two reels potentially would not have the same number of spacers, if at all, in all the same places.
Пікірлер: 36