Excellent video. I disarmed mine and until I found this video I wasn't able to put everything back.
@mariuszmac5801
11 ай бұрын
much needed video!, these shifters are good and popular
@rainerunsinn4808
11 ай бұрын
Good job! When taking apart a shifter like this, I usually also revamp the indicators on these, with a bit of red nail polish, to get rid of the faded out red-grey-white look. BTW. Have you got yourself an ultrasonic cleaner by now? ;)
@atboy4342
11 ай бұрын
No too much room. I’ve been using chemical baking soda for alot of stuff (I know, wierd, try it)
@atboy4342
11 ай бұрын
You know what, think I will get one. Any recommendations? I can get a used one for 2litres. Don’t know if that’s enough
@rainerunsinn4808
10 ай бұрын
@@atboy4342 I got myself one from a company called Vevor and it works fine. 2 Liters will be enough if you only want to clean small parts. I got me a 6 Liter to fit chain rings and cranks too.
@johannesdesloper8434
5 ай бұрын
Ha I spray painted them Gold.
@mohamedwalid4680
3 ай бұрын
From where can i get new one ?
@IgorKolar
4 ай бұрын
Darn, was really hoping to see the dial disassembled :D I have this exact same model and (probably) the same problem with the dial. Was thinking of reverse engineering and resin-printing a replacement. Great shifters, 23 years they survived on my bike so far! Thanks!
@defaultdefault4917
5 ай бұрын
Nice video. I disassembly right shifters and when I re assebly it I wasn´t sure how to put back on the spring and this video help me out.
@Novy74
4 ай бұрын
Got mine fixed!! Thanks, this video is excellent!!! It's not so difficult with a little patience and Your instruction. For last spring i hook up Tiny wire and pull it all the way to lock in place. Also painted indicators with red nails lacquer. Looks like new!!!
@HenkSteenbergen-oj1mm
5 ай бұрын
Great video! Without this I had not taken de gamble. Now the thing works fine again. One remark: I mounted the tiny washer on an other place, erlier in the video at 14:42. Otherwise my shifter gets stuck. Thanks!
@pauldaems4359
4 ай бұрын
Thank you so much for this excellent video! You provided great views and explanation and it gave me the courage to disassemble the shifter. Grease became sticky and after cleaning and relubricating with thin grease everything worked as a charm again. :-)
@johannesdesloper8434
5 ай бұрын
Thanx dude, you gave me hope. I busted the hole for the cable in the disc. gonnah epoxy it and reassemble.
@UncleP-u2k
7 ай бұрын
@ 2:42 he turns the shifter over to look at the pawl on the bottom. That pawl should work freely.
Пікірлер: 16