Replace brake lever arm without dismantling from handlebar or bleed. To access rubber cap & axle fixing bolt easier it is good to release lever reach at first.
Short, shows everything and I dont even need sound on. Amazing, thanks for sharing.
@metodsem9549
Жыл бұрын
:) Glad to help.
@Aragoner
Жыл бұрын
More detail in how the spring is added would have nice…on to the next video😂
@lglimited
Жыл бұрын
Wish u would have show how the spring goes in..
@kamilhultaj5006
2 ай бұрын
I FKING CANT PUT IT BACK JESUS CHRIST.....
@lglimited
2 ай бұрын
@@kamilhultaj5006 IT'S FUCKING BALL ACHE TRUST ME - ONE OF THE WORST FUCKING THINGS IVE EVER HAD TO DO, BUT IT'S DOABLE GET SOMETHING LIKE A LONG ALLEN KEY AND POKE IT THROUGH THE HOLE WHILST HOLDING THE SPRING IN PLACE U THEN WANT TO WIGGLE THE LEVER UP AND DOWN LIKE FUCK AS U JAM IT THROUGH GOOD LUCK, LET ME KNOW HOW IT GOES
@forest_biker684
Жыл бұрын
Great! Nice and concise! Thanks for adding the part number shots!
@Turfmaster151
11 ай бұрын
Thanks for the help dude. I was in a bind and this did the trick!
@hammersmashedface243
Жыл бұрын
The 1st one i saw, removed the caliper itself. Good thing i saw this. And its very easy
@mattg2935
7 ай бұрын
Awesome! Thanks
@TC-hl1ws
Жыл бұрын
Very helpful, thank you.
@metodsem9549
Жыл бұрын
You're welcome.
@sammyhed
Жыл бұрын
Great video, thanks
@metodsem9549
Жыл бұрын
You're welcome.
@Kraterdude
Жыл бұрын
Thanks dude 😎!
@metodsem9549
Жыл бұрын
Glad to help.
@tullidoperonovencido82
10 ай бұрын
Hi metod, In my case I couldn’t remove the axle. I saw in your video that you removed them easily but my axel is so tight that I can’t move it. Some tip to remove it? It’s normal that I haven’t been able to move it? Regards and thanks for your video.
@metodsem9549
9 ай бұрын
It is not easy for the first time. Try to put hex nut around the rod on topside parallel to surface so you can see the rod thru nut hole. Add short rod from bottom side and try to squeeze this "sandwich" with pliers. Don't forget to trotect surfaces against scratches with self adhesive tape or cloth. Hope you will manage it.
@ejhayes76
8 ай бұрын
Same issue with mine. That axle seemed seized in there. I had to order a new lever assembly for $44.
@moondoggy684
Жыл бұрын
Boom! And just like that
@rafaeldelafuente4787
Жыл бұрын
Thanks a lot.
@metodsem9549
Жыл бұрын
You're welcome.
@JimmyJane-tt8cw
10 ай бұрын
Dimana jual breake lever nya om
@GrizzJibber
3 ай бұрын
The pin doesnt want to come off...
@Bert_and_Sons
6 ай бұрын
👍
@ewan89
Жыл бұрын
What can I do if the lever axel doesn’t move?
@metodsem9549
Жыл бұрын
Yes, sometimes it needs a quite strong push to release the axle for the first time. Try to use a short plastic plastic ring and put it around the axle on bottom side. On the top side add a short plastic axle above the brake lever axle and squeez al this sandwich with a pliers for a few millimeters. I advise using plastic materials to avoid unwanted scratches on the brake levers.
@C2k_.Laylow60
Жыл бұрын
Where can I buy SL-M6100 LEVER at? Pls Lmk
@metodsem9549
Жыл бұрын
www.xxcycle.com. But I see now that it is not available at the moment.
@1three378
8 ай бұрын
The title should say "brake lever *blade* replacement". "Brake lever" is the whole thing you mount on the handlebar. (sorry, looking for a brake lever replacement video :-D)
@aaronperelmuter8433
5 ай бұрын
Actually, the title is 100% accurate and correct. 😱A _brake_ LEVER is exactly that, the LEVER which is used to operate the brake mechanism. 🤯Why, you ask, is it NOT referred to as a blade? 🤔Because blades are used for cutting, they’re found in razors and knives, etc but definitely nowhere to be found in any brake mechanism. 😳 Just for your benefit, the entire assembly is known as the brake lever mechanism or assembly, not just a brake lever because a lever is a specific thing, and levering is what it does and all it does. 😒There is nothing whatsoever that’s in any way blade-like. Not sure what kind of blades you’ve come across but everyone I’ve ever seen had a very narrow and very sharp edge running down the length of it. 🤨Again, this brake LEVER has none of that. Hence, it’s in no way a blade and shouldn’t be referred to as such.🤓
Пікірлер: 31