Oh Glen, what a bouncy ride! Great humour as always good viewing! So you went all in with a second chassis too... this is gonna be fun! 16 ain't bad for a starting point mate. The only way is up - good luck fella! :D
@rivierarc
Ай бұрын
@@MarkBryanRC yeah, only as it is easier to build evenings while still running this one plus god only knows where the other bits are to make this 239mm 🤣🤣 Also will have spares when I inevitably smash it 🤣
@poorboysrc
Ай бұрын
16 mph, but the car was in the air half the time, so we should really double this speed to a cool 32! Lol! It's incredible how bouncy the stock pogo sticks are, Glenn! That poor Porsche must've been something else to handle!
@rivierarc
Ай бұрын
@@poorboysrc oh, it's supposed to handle??? Whats that like?? 🤣🤣🤣🤣
@RCBirds
Ай бұрын
Nice entry Glenn. Have fun with improving the car and with the next runs.
@rivierarc
Ай бұрын
Thank you Dirk. It'll be much improved I hope as the road we will be using is nice and smooth. 😁
@yodadarksideGreenHawksRC
Ай бұрын
Great first run Glenn. That's the best looking car I've seen in the challenge so far mate...... Well..... It was! 😂 As a lifetime fan of the original Tamiya 959 it does seem strange seeing that body on a different sounding /bouncy chassis! Loving the humerous approach to the challenge buddy,if there's no walk of shame,then it's not a proper speed run mate! 😂 👍 👍 👍
@rivierarc
Ай бұрын
@@yodadarksideGreenHawksRC haha, unfortunately the car was out of shot when it bounced off the kerb. I knew then it would be 'fun' 🤣🤣🤣 Well, it's the taking part that counts thats for sure 😜 I may end up getting another body after as I do like it in that colour 👍👍
@JoevsRc
Ай бұрын
Nice run! Welcome to the party!
@rivierarc
Ай бұрын
@@JoevsRc cheers... hopefully it'll be a smoother one next time 🤣
@michaeldorich4485
Ай бұрын
I am looking forward to seeing changes that you make.
@rivierarc
Ай бұрын
@@michaeldorich4485 me too. Hope it all works when all the bits are on it
@g.b-MTB-trail-jumps3062
Ай бұрын
perfect review matev😍👌
@rivierarc
Ай бұрын
@@g.b-MTB-trail-jumps3062 😁😁👍👍
@theoagrc
Ай бұрын
Walk of shame starting and the body is trashed 😯 Great start Glenn 😁
@rivierarc
Ай бұрын
@@theoagrc well, might as well get it out of the way at the beginning 🤣🤣😲
@FastFreddyRC
Ай бұрын
Great first run!! I’m now trying to figure how to keep the steering straight. The faster it goes the worse it gets…tweaking is necessary for sure. I gotta get me a wheelie yellow shirt lol
@rivierarc
Ай бұрын
@@FastFreddyRC yeah, i have seen others have changed the servo saver and also shimmed the components to take out the slop etc. Mine is out of the box so leaving it like that as a learning curve. I have a different servo saver here if needed. I think I also read that a little toe out helps too. Haha, the wheelie yellow channel is awesome, such a great idea
@TamiyaTalkRC
Ай бұрын
Nice work, mate. Just subbed. Keep the 959 body, we can be twinsies 😅😅😅
@rivierarc
Ай бұрын
@@TamiyaTalkRC 🤣🤣... it'll be used for the next few runs for sure 😁😁😁
@All_RC_Fun
Ай бұрын
On the board is a start. 😊
@rivierarc
Ай бұрын
@@All_RC_Fun most certainly is a start. Roll on the weekend 😃😃😃
@TeamJunkYardDog
Ай бұрын
Great Job! Time to make changes.
@rivierarc
Ай бұрын
@@TeamJunkYardDog oooh... some have already been made and others in the pipeline 😁😁😁 Looking forward to the next 'smoother' runs 😜
@LukesVintageRC
Ай бұрын
Welcome to the speed run challenge. 😊
@rivierarc
Ай бұрын
@@LukesVintageRC thank you.. 😊 Hoping tomorrow can be better 🤣
@Mach7Racing
Ай бұрын
Great 1st video, can’t wait to see the upgrades!
@rivierarc
Ай бұрын
@@Mach7Racing thanks... payday today. Upgrades ordered for Phase 2 😜
@Mach7Racing
Ай бұрын
@@rivierarc love it. My pay day tomorrow will be buying some MF01 upgrades but Kamtec minis are on the list as we plan to race them.
@rivierarc
Ай бұрын
@@Mach7Racing ah cool. 😜 Enjoy the spend 😜
@AddamsPlayground
Ай бұрын
A bit on the bouncy side for sure! Some oil dampers and the lowest suspension setting are really needed to have a chance of keeping it steady!
@rivierarc
Ай бұрын
@@AddamsPlayground cheers😁 The oil dampera off my M05 are sittling in the work bench ready but going to rebuild them and may lower them internally with a spacer plus put the harder springs in. Thought it'd be fun to leave as box for the first run 😄😄
@coygtrc
Ай бұрын
Welcome to the tumble contest 😅 Might be obvious now, but "Gorilla" tape the GPS, don't ask me how I know 😢 That Porsche body is awesome 🤩 All the best for the next runs 👍🤝
@rivierarc
Ай бұрын
@@coygtrc its the crap velcro i was using, plus it was a rushed run. It'll be better secured next time. Also the road will be smooth too 🤣
@Paul__FC
Ай бұрын
Great to see such a beautiful shell. Best of luck to you!
@rivierarc
Ай бұрын
@@Paul__FC you commented half way through the video didnt you? 🤣🤣🤣🤣
@Paul__FC
Ай бұрын
@@rivierarc yep! I was crushed by the end.
@rivierarc
Ай бұрын
@@Paul__FC i rushed the body so my own fault. Hopefully with the road I am using next it'll be much smoother so shouldnt end up on its roof as much.... But .... it is me driving 🤣
@Paul__FC
Ай бұрын
@@rivierarc I just had some body myself. with my freshly painted bodymyself. I dont think the paint was even dry.
@rivierarc
Ай бұрын
@@Paul__FC i do have another body for phase 2 once I may be hit 30.... if i can 😁
@ourr.c4065
Ай бұрын
Nice job mate.
@rivierarc
Ай бұрын
@@ourr.c4065 cheers... better job next time hopefully 😜🤣
@herbieRCpaints53
Ай бұрын
Nice start Glenn 😀
@rivierarc
Ай бұрын
@@herbieRCpaints53 Cheers James. Hoping it'll get better as we go on.... 🤞
@Paul__FC
Ай бұрын
Walk Of SHAME!!!! No!! The shell!!!!!
@rivierarc
Ай бұрын
@@Paul__FC Plenty more walks of shame coming I'd imagine 🤣🤣🤣 I am definitely getting another shell and doing it this colour again for one of my other M-chassis, but take my time doing the paint this time 😁😁
@tm5123
Ай бұрын
I wonder if the tamiya designer was so frustrated designing the chassis he named it motherf…-01x 🤣
@rivierarc
Ай бұрын
@@tm5123 🤣🤣🤣🤣🤣🤣🤣🤣 yeah, thinking along those lines 🤣🤣🤣
Пікірлер: 48