Dodge - Go back and watch the video again and watch your swing technique. You have that tendency to ‘push’ the hammer rather the swing. You’re losing so much potential energy like that. Put some ‘whip’ action in there and you’ll get so much more power from your swing. 🤜🤛
@Dodgestruction
4 жыл бұрын
I'll keep an eye on that. I'll go film from the side sometime to see how much wrist action I'm using. I feel like the front shot doesn't show much of that, but maybe my feelings are incorrect. Thanks for the feedback. I don't want to be loosing power!
@Dodgestruction
4 жыл бұрын
I've been focusing on my swing for awhile. Just pounded a bunch of ring shank nails for carpet tack strip. I can tell a big difference now that I am more comfortable and the swing is more natural using more wrist. A lot more power, and really a lot easier. Thanks for the tip!
@psidvicious
4 жыл бұрын
@@Dodgestruction That’s awesome! Anyone can swing a hammer but to swing with maximum power and effectiveness is not easy! It literally takes years of hand/eye coordination and developed muscle memory to really get maximum effect with minimum output. We think of the hammer as THE most rudimentary tool but there are good hammer swings and swings that need work. The cool thing is, you don’t lose much with age. You may lose a little in the power column but as technique improves, so does effectiveness. 🤜🤛
@jessesloan9636
4 жыл бұрын
That has alot to do with the height in which the nails you're driving are at. Long handled hammers swing alot better below your feet. Mainly blasting walls together. Idk of many guys that naturally swing well at pecker height.
@jacobcisne4663
4 жыл бұрын
Thank you for being one of the only videos that skips any bullshit and gets straight to the point with actual good and helpful information first video ive seen from you and im more than impressed
@Dodgestruction
4 жыл бұрын
Thanks. No point in messing around. You came to hear my thoughts on hammers, so I why mess around with anything else?
@joshuaodowd9107
4 жыл бұрын
Been swinging my 10 ounce stiletto with the poly grip doing siding everyday for 7 Years now wouldn’t trade it for anything else.
@Dodgestruction
4 жыл бұрын
I love the 10oz for siding! Unless it is on an older home with maple sheathing. That stuff is HARD! I pull out the TB-15 for that.
@bushtrash2286
4 жыл бұрын
Thank you so much for this, I have really bad hand damage on both hands, I did pick up the Dewalt hammer rip car 20 oz, but I agree the shock in the hands is not bad but it is enough for me to get a new hammer, I don't like wood handles though, but ill look into other titanium hammers, really good review, and I appreciate the video, thanks.
@Dodgestruction
4 жыл бұрын
I really like mine. After a full summer working with it, it is still in great shape. I'm sure it is going to last me a long time. Makes the cost a little more justified. Thanks for the comment. Glad the video was helpful.
@leohiggins7737
4 жыл бұрын
Bush Trash stiletto has a fiberglass handel on a 10 oz hammer . I went to stiletto 20 years ago when my arm was killing me. It helped in about a week, no more shots or pain pills. I have the to new 24 oz and also a wooden 10 oz . Great tools and last very good
@ibrazeau3044
4 жыл бұрын
The Martinez and Stiletto weigh the same thing. I have a tb2 and two Martinez (M1 and M4). The Stiletto is a balanced hammer from handle to head whereas the Martinez has more weight at the head. The stiletto's handle is also thicker and I prefer its side nail puller and opposing head hole... I use it for the wall jack handles when they are high. The Stiletto has a bigger strike face and head then the Martinez and the length of the Stiletto is 2 inches more. Now, on the nail driving... for me... the Stiletto is a faster swinger but less precise. I pound more and thank God for the bigger head. I feel the pounding strength comes from the length of the hammer handle but that leads me to be less precise overall. The Martinez is heavier at the head and driving seems effortless
@Dodgestruction
4 жыл бұрын
Great points. I heard about the weight moving to the head on the Martinez. It makes sense. Good observation about my swing. I had only used the TB-2 for a couple weeks of remodeling at the time of the video. I have been trying to ad more wrist action since the video. It has taken me awhile to get used to the length and hatchet handle. Most of my time framing has been with the larger Estwing in the video. Thanks for the comment.
@ibrazeau3044
4 жыл бұрын
Dodgestruction - gets some getting used to... just as an explanation if I may and if I can explain clearly: I never raise my hammer higher then my ear, I also use my pinky and ring finger to keep the hammer aligned with the nail, I loosely hold the index and other finger on the hammer. When I strike down, I stop my arm roughly higher then the nail, loosen my grip ever so slightly, and let the hammer wack the nail down. The hammer does all the work, not my arm. I have less fatigue like this because my hand guides the hammer rather then holding it strong. When my pinky and ring get fatigued, I alternate with the index and other. It is the wack (hammer head velocity and weight) that drives the nail. Same goes for below knee and side nailing. I have been hand nailing for a good 25 years and that's my method (can't explain better then that). 16 penny nails go in using two strikes (never got a 1 bang). I can't do that on up nailing but hey, I generally use a nailer for that anyway.
@Dodgestruction
4 жыл бұрын
@@ibrazeau3044 I'll give that a try next time I'm pounding nails. Thanks
@johnymartin5411
4 жыл бұрын
Im buying an m1
@I-am-not-a-number
4 жыл бұрын
My Stanley steelmaster is nearly worn out after 35 years. Thanks for the heads up.
@Dodgestruction
4 жыл бұрын
That is incredible. I wish tools were still made to last like that!
@Luketochkin
4 жыл бұрын
I've used my 16 oz Dalluge Titanium hammer for the past few years now. I absolutely love it. I had the Stiletto TB2 but it just wasn't my thing. I also had the Dewalt yellow handle hammer that you were talking about in the video (the third hammer) and my god does it suck compared to any other hammer on that table and my Dalluge. I chopped up the Hickory handle on my Dalluge to make it easier to get in and out of my tool belt but later on reconfigured stuff and wanted the extra torque I was missing... So instead of buying a handle, I made one out of Zebrawood and maple. Kind of don't want to bring it on the job site anymore because it's so beautiful but It is a hammer after all. I found because of the denser wood than Hickory, it doesn't vibrate as much through the arm - I've used it in framing, finishing, demo work... When the waffle face goes completely on the Dalluge, I plan on purchasing a Martinez M1 hammer head and somehow making a wooden handle for it and using that as my main go to framer hammer and making the Dalluge a finishing hammer because of the flat faces on it. All in all, this was a great review video!
@Dodgestruction
4 жыл бұрын
Wow! That sounds like a cool hammer. About 9 months now using the TB2. I still really like it, but I do miss a wooden handle. Wood just slides in and out of a hammer loop so much better. Thanks for the comment.
@briangc1972
4 жыл бұрын
The maple you used is softer than hickory and that is why your zebra wood/ ample handle vibrates less. Soft wood absorbs vibration much better than hickory and other hard woods
@coreyluscher3861
Жыл бұрын
The matinez hammer head is just made out of steel it’s not a titanium head it only has a titanium shaft so just buy a 12oz steel head and save money otherwise there’s not much point in dropping $270
@andyloucks
2 жыл бұрын
I'm not sure if you still monitor your videos, but I appreciate the review. Plus, you respond well to the KZitem critics regarding your swing and hammer choices. I personally run a wood pallet remanufacturing business, and while my primary tool is a Milwaukee M18 framing nailer, I also use a hammer to drive exposed nails back into the 2x4 that run lengthwise on the pallet. The nails are generally 0.113" diameter and around 2" long. Anyways I'm considering a Stiletto TB-III with waffle face, Stiletto wood handle with waffle face, or some combination of Martinez. I don't really need the side-puller or nail set features. Though with the TB-III having a steel face, that would be a benefit as the waffle pattern would last longer. Have you noticed a significant difference in the fatigue you get from a wood handled hammer vs the full titanium?
@Dodgestruction
4 ай бұрын
Sorry, I’m not very good at monitoring KZitem. I’m trying to do better. You probably made a choice already, but I honestly would recommend a wood handle 14oz Stiletto. It is hard to beat for the price. The TB-III is a great option as well. I now own a Martinez as well. I don’t like the balance. Too top heavy. I’m a Stiletto guy for sure. Thanks for the feedback and compliment.
@paully8031
5 жыл бұрын
After 35 years of Estwings i've finally moved to a 14oz mini Stiletto, I'll never go back.
@Dodgestruction
5 жыл бұрын
Thanks. I would like to get a mini. They look great!
@carpentryfirst3048
3 жыл бұрын
I have the 14 mini and my issue is the way the end of the handle curves. Makes it a real Pita to slip in and out of my leather hammer holder on my Occidental belt. Got the nail puller as well to lower the weight of my belt. Really LIGHT!
@TheSavagederek
4 жыл бұрын
Estwing I've been using for 30years , but considering either the 14oz Stiletto wood handle or the 16oz Vaughan Dalluge wood handle , both full titanium heads .
@Dodgestruction
4 жыл бұрын
I think you would like either. I personally like the stilettos better because of the straighter claws. I don't think you will regret the switch.
@TheSavagederek
4 жыл бұрын
Thank you .
@adamslogging
5 жыл бұрын
I have swung a 14 stiletto since 2001 got a martinez this year and it is worth it
@Dodgestruction
5 жыл бұрын
Good to know! Thanks for the feedback. I really wanted to hear from someone that has used both. I'm hoping this TiBone will last me a long time, but will probably look at a Martinez next.
@johnmcquaid7524
4 жыл бұрын
How is the Martinez hammer's side-nail puller? Is Stilletto's side-nail puller noticeably better?
@ray_banz5899
2 жыл бұрын
Vaughan 19 oz California framer is my daily driver for residential framing
@Dodgestruction
2 жыл бұрын
That is a tried and true work horse!
@lnesland
5 жыл бұрын
Nice review. Stiletto is the way to go :-)
@Dodgestruction
5 жыл бұрын
Thanks. I like it more and more each time I use it.
@lukejodoin3449
4 жыл бұрын
I had a hard time deciding between the stiletto and the martinez. I ended up going with the martinez...in the event that the claw breaks on the stiletto thats it because its all one piece you either have to use a broken hammer or drop another $250. The entire head on the Martinez is removable so if you break the claw you can just pop it off and replace it
@Dodgestruction
4 жыл бұрын
I had the same hard decision. I got the stiletto on sale for $167, so I took my chances with the titanium head. So far, it is holding up well.
@lukejodoin3449
4 жыл бұрын
Oh hell yeah, thats a great price! Ill prob end up with a stiletto at some point as well. Hey, why not test em all right? Lol
@nesisurfcheck4232
3 жыл бұрын
Stanley fat max. I dunno. I just like it. Put my own grooves in it with a hacksaw. And if you watch the video the nail just flys in.
@silverback4434
5 жыл бұрын
i prefer the stiletto with the wood handle i have swing the 14 oz and its a beast
@Dodgestruction
5 жыл бұрын
I almost bought one of those. I really wanted the side nail puller on the TB-15. I use it a lot during demo.
@silverback4434
5 жыл бұрын
@@Dodgestruction these hammers are soooo light weight its like a kid toy in the hand 😂 thats why they are so cool . Peace ✌
@Dodgestruction
5 жыл бұрын
@@silverback4434 I like both of them. Sometimes I wish I had bought the 14oz. I've always really liked wood handles. Almost all my work is remodeling, so the side nail puller has been really useful. I would go with the 14oz if I was doing more framing. 😀
@Dodgestruction
4 жыл бұрын
@@silverback4434 I really like Titanium. Just used mine a bunch the last two days. To me they make hammering a lot more fun.
@bwojak3226
4 жыл бұрын
The 14 ounce is a beast ha ha ha ha Ha
@gregwalker4236
4 жыл бұрын
trouble is, until you start experiencing pain, a regular steel hammer seems fine, and you can buying a framing gun for maybe less tan that $200 titanium hammer. one hammer won't do it all in my experience, but opinions will vary....
@Dodgestruction
4 жыл бұрын
That was my exact experience with steel and pain. I do have a pneumatic nailer. I do a lot of remodeling, so a hammer is pretty much unavoidable. I am still liking the hammer. It was a lot of money, but to me it was worth it. You are right, one hammer doesn't do it all. Between the 10oz and 15oz Stiletto, I'm pretty well set for the majority of jobs.
@stevendouglas3860
4 жыл бұрын
Should i get 1 or just get a hickory Vaughan steel
@Dodgestruction
4 жыл бұрын
A Vaughn steel is a great hammer. That largely depends on how much you want to spend. I really like my Stiletto, but it is a very expensive hammer. To me, it has been worth every penny. Not sure if that helps at all.
@jackgibson7848
4 жыл бұрын
The state of your swing... Use your wrist.
@Dodgestruction
4 жыл бұрын
I've been working on that. It is helping a lot.
@dave9073
4 жыл бұрын
Titanium hammer, Nope. Framing nails, get a waffle face 22oz steel hammer that the handle fits your hand. Grip should be lite and learn to "Flick" or "Whip" the hammer on the nail. Accuracy problems? If you go thru a box of hand-drives and your still hitting your thumb, go flip burgers at McDee's now that you have a flat appendage. Was an apprentice BEFORE nail guns when the journeymen watched and commented as you swung a hammer. BELIEVE me, the things they would say and laugh, if i wasn't a stupid 15 yrs old kid who didn't know "Nothin", never would have lasted in carpentry. I still can swing a 22oz hammer today, all day, and still hold a beer without spilling. LOL Good Luck
@Dodgestruction
4 жыл бұрын
Haha 🤣 As long as you don't spill the beer! Don't want to waste any beer! After about a year using titanium, I still really like it. I don't plan on going back to steel anytime soon. Cheers to another day working construction and not flipping burgers!
@themarine09
4 жыл бұрын
Is that Enrique Iglesias ?
@Dodgestruction
4 жыл бұрын
I wish.
@mayranut8644
4 жыл бұрын
themarine09 hahaha lol no mames
@JONNIE_ROCKER
3 жыл бұрын
👍👍
@kaipo8489
3 жыл бұрын
Dude for a guy who has shoulder issues and complains about vibration i would think you wouldnt keep buying metal kneck hammers?
@Dodgestruction
3 жыл бұрын
The TB-15 helps a lot, but yes, some of us learn the hard way I guess 🤦
@barrettfriesen3994
4 жыл бұрын
Does a review on hammers, can’t hit a nail for the life of em😂😂
@Dodgestruction
4 жыл бұрын
Comments on KZitem, yet has no videos of his own. 🤣🤣 Just joking around. I end up doing mostly remodels, so swinging a hammer isn't a big part of my day to day work. You are right that I didn't hit the nail on the head as much as I should have 😉
@bryanpaul410
5 жыл бұрын
i just bought that dewalt that you hate a couple months ago and i don't like it either
@Dodgestruction
5 жыл бұрын
Right? I was really disappointed considering the reputation of DeWalt.
@Dodgestruction
3 жыл бұрын
@cruz carchevy I'm with you on that after this hammer.
@bwojak3226
4 жыл бұрын
It would be nice if The camera was close enough to actually see the hammer. Been swinging a hammer since before you were born and before they had a nail gun‘s, lighter hammers are not the way to go, makes no sense at all
@Dodgestruction
4 жыл бұрын
Good comment. I didn't have a tripod yet when I filmed. I set my phone on my work bench. The lighter hammers are good for a lot of things. I still switch my hammer based on the job for the day. I use the 28oz Vaughn if I am concrete forming or nailing on the ground or below my waist. Otherwise, I do prefer the titanium for a typical day that requires nailing in many positions. Thanks for the feedback.
@goatf1sh87
4 жыл бұрын
Martinez is great... Until the heard breaks for no f*ckin reason. They sent me a new head, no questions asked which was excellent.
@Dodgestruction
4 жыл бұрын
I'm sure that was frustrating. I do hear their warranty and customer service is excellent. Glad they got you fixed up. My Stiletto is doing great!
@briangc1972
4 жыл бұрын
Titanium does not absorb vibration any better than wood. That is a myth. The Titanium hammer's advantage is the weight distribution and balance vs wood. Wood is far superior to any metal for absorbing vibration. The handle and grip are also effective in reducing felt shock and vibration, but the metal handles and heads do very little. A lighter head hammer with a wooden handle with a rubber grip will give the best results for reduced felt vibration.
@adamfossen
3 жыл бұрын
this guy is not a carpenter. i can tell by the way he swings the hammer
@Dodgestruction
3 жыл бұрын
I do apartment repair, remodeling, and maintenance. Haven't framed in years, so I guess I depends what you mean by carpenter. I'm not a framer that is for sure.
@barney3247
4 жыл бұрын
You probably get shit on site because you keep missing the target...
@Dodgestruction
4 ай бұрын
I know this is an old one. No, but I do get a hard time for how much I’ve spent on hammers 🤣 They’re not wrong. (Sorry, I know this is 3 years late)
@matthewjackson9615
4 жыл бұрын
F = M*A , the titanium hammers might be lighter and stronger , however it takes more blows to drive nails with them. It's just a trade off and not a step up. Why make the expensive investment in a titanium hammer when for the same money you can buy an adjustable cordless nail gun that will effortlessly drive nails all day long. You realize we're in the 21st century don't you ?
@Dodgestruction
4 жыл бұрын
In remodeling and siding, you just end up swinging a hammer a lot. The vibration dampening is what makes the biggest difference.
@matthewjackson9615
4 жыл бұрын
@@Dodgestruction OK.
@johnymartin5411
4 жыл бұрын
I drive 60d nails and $250 vs $1000 is why.
@raymondbernhardt7617
3 жыл бұрын
If you are a "baller", then 👍
@mattglatt9769
5 жыл бұрын
I use a Martinez and will never buy another hammer again.
@Dodgestruction
5 жыл бұрын
Good to know. I really want to try one. Overall, I'm still pleased with the TiBone, but the Martinez does look like it has improved on the few weaknesses on the Stilletto. Thanks for the feedback. The M4 might be my next hammer purchase.
@ibrazeau3044
4 жыл бұрын
Dodgestruction - the M4 handle (the short one) with the wide claw smooth M4 head is great for siding. Note that the face is not slanted like the M1 and is a little rounded. Something to think about for galvanized nails. I have the regular M4 head with the dimpled face and replaced it with the wide claw shortly afterwards. I also filed down the squared edges a little because it showed on finished work at times. The magnetic nail set is smaller then that of the M1 and 16d nails won't fit in it. I love this hammer but I thought you'd want to know these beforehand. I use it constantly for pretty much everything except framing. It's always in my hammer loop.
Пікірлер: 87