Honestly you should do a full breakdown even if it is long, that would be a dope ass video we all would love to see
@VitaminZ77
4 жыл бұрын
Alfonso Delgado I’ll see what I can do about that!
@vonksummer9099
10 ай бұрын
did u do it?@@VitaminZ77
@ryanscanlan9875
4 жыл бұрын
Dude, that is the best looking Z I have ever seen. Phenomenal build. Very Jealous. What kit is that?
@VitaminZ77
4 жыл бұрын
Thanks much dude. It's mostly Voltex, but with a Chargespeed Type 1 front bumper.
@darrelltuttle8298
4 жыл бұрын
@@VitaminZ77 I have an 05 G35 coupe. Would you be willing to make another heat shield for the right price for my coupe.
@VitaminZ77
4 жыл бұрын
Darrell Tuttle man unfortunately about to have my hands full on a motor build and turbo.
@darrelltuttle8298
4 жыл бұрын
@@VitaminZ77 no problem just keep the content coming. I'm going down the same road with my coupe.
@darrelltuttle8298
4 жыл бұрын
@@VitaminZ77 Glad you're building your motor but, if for some reason during your build you don't need the heat shield please let me know.
@darrelltuttle8298
4 жыл бұрын
Do us all a favor and NEVER get rid of your Z.
@dbdman11
4 жыл бұрын
Thanks for making this video I’ve been wanting to do this to my Z for 3 years sense I owned it. And I’m finally at the point where I can add cams and stuff. Awesome!
@VitaminZ77
4 жыл бұрын
dbdman11 awesome! You definitely should!
@yungken5056
3 жыл бұрын
Og of the cleanest simplest z’s I’ve ever seen. Absolutely beautiful 👌🏼👌🏼
@FKtooswavey
3 жыл бұрын
nothing beats an OEM+ look
@LightRealms
3 жыл бұрын
I'm salivating looking at this build. Has to be the best looking Z I've ever seen!
@lamonthouie8675
2 жыл бұрын
Nice ride.. we met today at z1 i was able to see this monster in person. Great build
@VitaminZ77
2 жыл бұрын
Great to meet you dude!
@justinswindle5334
4 жыл бұрын
Just found this video as I’m doing a Z build. Gained my sub👍🏻 you know what you’re talking about and gave me the info I needed! Will be tuning in for more as well! Thanks
@VitaminZ77
4 жыл бұрын
Thanks dude! Life a little busy at the moment but will be uploading again soon
@alfredomagallanes7837
3 жыл бұрын
@@VitaminZ77 Hey their I got a question so is it possible to get the tomie cams on a automatic HR 350z? Or does it have to be stick?
@kevinespiritu7681
3 жыл бұрын
Still one of my favorite Z's.
@deafdan88
3 жыл бұрын
Beautiful 350z 😍
@yasindereje2327
4 жыл бұрын
Crazy build dude I love it
@CitiZen1.0.1
3 жыл бұрын
Stand up job worth being very proud of. Your Z is a work of art, and that's what matters most.
@ryanscanlan9875
4 жыл бұрын
Please do a full break down!
@cre8tivegarage157
4 жыл бұрын
If your down full send , your car is clean clean , overall great video and fantastic car
@germansanchez6226
3 жыл бұрын
so simple and so clean, i like the car bro!
@nicksouksavong9252
Жыл бұрын
Im from lavergne, this just solidified to me that TN is just nissan home for U.S
@jellofuel
4 жыл бұрын
Didn't realize it makes 290 wtq, must be a blast to drive.
@VitaminZ77
4 жыл бұрын
jellofuel it is! I went and double checked my sheet from three years ago and it’s actually right at 281tq, so I was off a little.
@svoncampe
4 жыл бұрын
That’s a very nice looking Z
@marcoechavarria7274
3 жыл бұрын
I’m at 160k in my HR and have been thinking about what I want to do engine wise down the road as i never plan on selling it. I’m thinking full bolts, cams, slightly higher compression & sown other stuff since I want to keep it NA for the touge. This helps a lot!
@SuperchargedDragonball350z
3 жыл бұрын
if the motor ever craps out, me personally after all the money it took to keep it N/A compared to the horse power gained... i love my z, even when it was stock it was fun, and my motor was so low mileage (18k) that i decided to go full bolt ons also. id rebuild for a lower compression motor and add boost. probably cost same or less, and you can control the amount of HP you really want. but much respect for keeping her all motor also man. just depends on how happy you are with 300 ballpark at most N/A depending on model. keep that Z rollin either way man!
@forzadrifter8840
2 жыл бұрын
@@SuperchargedDragonball350z I have an 04 g35 manual coupe with 40k miles on it. Is it smart to add more performance and possibly a turbo at my car's current life, or do you think I should wait til at least 100k miles?
@mv7422
2 жыл бұрын
@@forzadrifter8840 I can’t really answer that for you man, if you research it and keep it mild I would say pull the trigger and boost it, but get familiar with the proper extra maintenance intervals and follow them strictly . But if you plan to really try and push it, I’d do it down the road after you get a lot of miles and fun out of it first 🤷♂️ really just comes down to how much and how hard you are on it once it’s boosted, and how well do you keep up on the extra love she will now require. 40k is a very low mile car, and could potentially last you years, or we could blow it up tomorrow lol I’m also conflicted with this same situation cause mine has not rolled over 20k miles yet. If this was a high mileage car, I probably wouldnt be as concerned about accelerating the process a bit so I could build it correctly for application of boost. Good luck bro, keep the dream alive
@forzadrifter8840
2 жыл бұрын
@@mv7422 This is exactly what I needed to hear. Thank you very much for your insight. The car right now has nothing but a muffler delete and tanabe sway bars. Soon, I think I want to have the car running around 400whp with full bolt ons and a small turbo. And I do want to go full send, but you're right, since this is a very low mile car it would be smart to have some fun and experience what the car was supposed to be about when it was manufactured. Thanks once again kind sir, take care.
@sidlas2001
3 жыл бұрын
So clean!
@jhonsmith2150
2 жыл бұрын
My old ass 03 DE M6, made 280HP an 270TQ with afew bolt 🔩 ons! Alot of ppl under estimate the DE's! It's ok, I'll shw them other wise! Varooom varooom VQ35DE power 💪🚗💨💨💨👏👍😎
@taeb.4121
4 жыл бұрын
Great vid bro. Instant sub.
@batuhan4002
Жыл бұрын
Well a turbo setup for a Z is expensive "DO TO IT RIGHT" N/A is super ok for long term and great budget.
@thestonedhippo
3 жыл бұрын
z1 quouted me 2k if they didnt have to resurface the heads
@williamzeus8669
3 жыл бұрын
2k for 30 horsepower. sounds like a deal XD
@makifrable
3 жыл бұрын
There is a guy in Poland who the one, who made pretty much all of the best VQ35/VQ37 in Poland. He has some very nice stroker kits in house which make abou 4.3 litres. His best N/A 350Z made about 400 whp. Check him out, guy's a blast. Coobcio Garage.
@joshuasutton4043
3 ай бұрын
Nice z bro wish I had a buddy to drive my z with
@usa5046
4 жыл бұрын
Very nice
@munishpersaud3631
4 жыл бұрын
slap some cams straight in and pray to god(;
@robertgardner7730
4 жыл бұрын
Clean fucking z bro sick
@VitaminZ77
4 жыл бұрын
Thank you dude 🤘
@waynejr8725
3 жыл бұрын
Facts.. My upgrade oil pump.. is boundary oil pump is better nismo oil pumps are on back order
@brianunderhill4235
4 жыл бұрын
I've been trying to find that rear spoiler and can't. PLEASE help me find it
@jeremiahgomez2688
3 жыл бұрын
Any luck yet? I want it too
@GhettoFabulous670
3 жыл бұрын
This is one clean 3fiddy. How much power were you making at this time?
@VitaminZ77
3 жыл бұрын
Car made 304whp at the time of this video
@Alex-CA
2 жыл бұрын
I'm quite sad that you did not add an audio clip of the car.
@VitaminZ77
2 жыл бұрын
Plenty of others on the channel
@zenkiethan
4 жыл бұрын
who’s your tuner ?? i’d expect more power from that awesome set up you have. Many of my friends are admin tuned with just test pipes and exhaust making 264 wheel on a de non rev up. I feel that a better tuner could bring 20+ hp. You’re car is absolutely sick no hate in just trying to have you making the most power you can :)))
@VitaminZ77
4 жыл бұрын
Ethan Fox Z1 tuned. Cams are usually good for 30-40whp which is in line with my result. 🤘
@jcromeen7456
4 жыл бұрын
Vitamin Z can you still turbo it?
@chaotiicxx4119
4 жыл бұрын
This looks very nice!! One question lol is it reliable.. I’m looking into doing this lol
@VitaminZ77
4 жыл бұрын
Chaotiicxx car has been like this since the spring of 2017. Not a single issue.
@epicgamerman4268
7 ай бұрын
how dare you tease us and not start it lol
@tompowell663
Ай бұрын
I have a turbo z, should I camm it?
@VitaminZ77
Ай бұрын
Yes. Mine is turbo now too with the same cams.
@Hawlkeye-e9p
3 жыл бұрын
Pitch that intake. Get a modded hood and install a low profile super charger.
@VitaminZ77
3 жыл бұрын
The car has been built and turbocharged
@bryce0023
3 жыл бұрын
Is it alright to do all you recommended in this video without any other mods?? I’m running a k&n drop-in air filter, but am otherwise completely stock in an ‘06 manual revup. I love where your Z is and would greatly appreciate any tips you could provide to help with my build lol
@g35tho11
3 жыл бұрын
Great car !!! Where did you buy that oil catch can ??
@VitaminZ77
3 жыл бұрын
Dynosty 🤘
@joaquinmalagon9343
Жыл бұрын
Epic build! How was the nismo fuel pump in terms of NVH? Thanks!
@VitaminZ77
Жыл бұрын
It was a Nismo oil pump. No issues there. Fuel pump in this video is a 255. No NVH really.
@joaquinmalagon9343
Жыл бұрын
@@VitaminZ77 Ahh sorry I must've misheard, thank you. I had a few more questions about your build, do you know if you can run a 285/30 tire in the front on your setup? Also what camber specs are you running? And lastly are you running any aftermarket endlinks? Thank you!
@VitaminZ77
Жыл бұрын
@@joaquinmalagon9343 it’s possible on the tire setup, but check the aspect ratio. I can’t recall my camber spec I’ll have to go look. I’m running whiteline endlinks
@raulcarmona2417
4 жыл бұрын
are those cams plug&play? not need to change pistons or do something to avoid touching the valves? i remember something about that with the tomeis 272. pretty nice car men, thats what i wish to do with mine
@VitaminZ77
4 жыл бұрын
Raul Carmona you’ll want to be aware of the lift, not necessarily the duration (272). These have 10.5mm I’d lift, which was what Tomei recommended for stock pistons. Some people run a higher lift, but I just went with the recommendation.
@raulcarmona2417
4 жыл бұрын
@@VitaminZ77many thanks for the answer. i saw a second hand not used ones but has 11 and 11.3 lift, that's why i thought it will hit. i do not know there are with less lift. so new oil pump is needed right?whats your max rpm with them? thanks
@ryanscanlan9875
4 жыл бұрын
@@raulcarmona2417 11 is the absolute limit with lift on stock pistons.
@isaacrodriguez2710
4 жыл бұрын
Did you add springs and retainers for those cams and lift ?
@NSReyRey
4 жыл бұрын
So i was wondering if it was ok to replace just the cams or should I chang out other stuff too ?
@TheChaseShank
4 жыл бұрын
Yo I’m stacking parts rn for my 280° cams I have 11.3 lift and piston recession is advised. I have the springs and Nismo oil pump. Any suggestions?
@VitaminZ77
4 жыл бұрын
Sounds like you're doing a full build of the motor? Run pistons with valve relief for sure. If you're staying on a stock motor you might want to consider cams with less lift. Consult with a reputable engine builder, preferably on the VQ, to be sure. While you're in there, do your gallery gaskets and all timing components, tensioners, fresh water pump, pathfinder coolant mod, and a good oil cooler.
@OfficialParkit
4 жыл бұрын
@@VitaminZ77 272 cams can run stock pistons right?
@justinalp03
4 жыл бұрын
is there any way I can contact you? have a few more questions, thanks
@VitaminZ77
4 жыл бұрын
Justin Asl hit me up on Instagram. @zora_the_z33
@mma5856
3 жыл бұрын
hi iam willing to order these cams but i want to know if i must order solid lifter set with it or it will work fine . iam ordering cams and tomei springs but iam curios should i order the solid lifters as well with it so it can work perfect ?
@adamchristopherson5242
4 жыл бұрын
What have you done with your intake/exhaust set up?
@bruno100carro
3 жыл бұрын
what is the maximum WHP that a Z can make ? " all motor " no turbo , no supercharged , nitro or stroker
@VitaminZ77
3 жыл бұрын
For a DE I think the highest I recall seeing was somewhere around 320whp. Built motor and still a single throttle body. ITBs probably would push it higher.
@steezdagodd3103
2 жыл бұрын
I wanna fuckin hear it damn
@jubreakitjuboughtit4236
3 жыл бұрын
Well dude. U couldve well have hr swapped or something along those lines
@RAH_Z
4 жыл бұрын
What spoiler do you have? Its beautiful
@VitaminZ77
4 жыл бұрын
Thanks man. It’s a Stardast Carbon duckbill
@stockg35x
Жыл бұрын
how much did z1 charge to install?
@ZeeLover123
Жыл бұрын
You can get 30hp gain just from doing exhaust and intake and tune? what did the cam do then?
@VitaminZ77
Жыл бұрын
Original dyno untuned was around 245whp back in the day. With exhaust, intake, and tune it took it to around 275whp. Cams and associated support mods took it to 304whp. Cams added another 30 or so and drastically changed the power curve.
@stevenneese2823
3 жыл бұрын
What wheels ya got there?
@VitaminZ77
3 жыл бұрын
370 Nismo 10.5 square
@stevenneese2823
3 жыл бұрын
@@VitaminZ77 ty. Those 19's or 20's?
@VitaminZ77
3 жыл бұрын
They are 19s
@stevenneese2823
3 жыл бұрын
@@VitaminZ77 well ty, sir
@BusyB07
3 жыл бұрын
Do you know much about the process of swapping 3.5 cams in a VQ30?
@VitaminZ77
3 жыл бұрын
I honestly don't, sorry!
@Endersmens
3 жыл бұрын
How much of the motor is built? You mentioned power all the way to 8k rpm....on a DE?
@VitaminZ77
3 жыл бұрын
Correct. In this video it was a stock short block and stock heads minus the cams, springs, and oil pump.
@JordanH69420
3 жыл бұрын
I think bolt ons and cams is the route im taking with my hr, especially since it'll be much cheaper than the 14k to supercharge it 😅
@matthewpalm7484
3 жыл бұрын
I mean there are options to add the vq37 Crank and Rods with the hr pistons; it sounds crazy and I haven't seen numbers but if you're willing to try that it could be an interesting endeavour
@cainadkins3985
2 жыл бұрын
@@matthewpalm7484 why though when you can just buy a forged kit for the bottom end and you can even bore it out to a 4.0
@matthewpalm7484
2 жыл бұрын
@@cainadkins3985 Because the 3.7 crank and rods are significantly cheaper (Something like $4k cheaper?) and since it uses the same block, it can hold 550-600 whp on those internals, for someone not wanting to spend $14k to build the motor, it's a good option.
@devon5078
4 жыл бұрын
would you recommend brian crower? im thinking of going with their cams + springs/valve kit
@VitaminZ77
4 жыл бұрын
I’ve heard good things about them! Get a quality install and tune and I’m sure you’ll be happy
@TacticalJay.
3 жыл бұрын
Sup man i like your z i want to buy one but everyone keeps saying to get a HR i see you have a DE ive been looking for a hr z for a while now and no luck yet should i stray away from DE i ask you cause you own one
@VitaminZ77
3 жыл бұрын
Depends on your long term goals. HR is a strong platform that can handle some power on a stock block. I argue that either one is a good choice, just depends on budget and what you’re wanting to do
@TacticalJay.
3 жыл бұрын
@@VitaminZ77 i want a reliable fun daily driver to do pulls in and still get me where i need to go
@jaysonsmith5412
3 жыл бұрын
Both will be a good choice. Hr just a little faster out the box with a stronger block
@imp9ct239
4 жыл бұрын
I wish you did this this to a HR how much hp do you think you’d get
@VitaminZ77
4 жыл бұрын
A strong HR with quality parts and cams would likely get 330+whp I would imagine.
@anthoney5416
4 жыл бұрын
What rims and width and tires
@TheVboyfresh
3 жыл бұрын
What brand side skirts 😍😍
@VitaminZ77
3 жыл бұрын
Voltex!
@PlaguedxAmbition
3 жыл бұрын
@@VitaminZ77 voltex expensive af lol
@austinkovinchick6706
4 жыл бұрын
Would these same cams work on the motor in a 2004 g35 coupe?
@colequaile692
4 жыл бұрын
Yes it should they are the same engine
@xr3703
Жыл бұрын
Are you currently on stock ECU?
@VitaminZ77
Жыл бұрын
Yes still running uprev for now
@colequaile692
4 жыл бұрын
It was actually only 1500-2500 for you to do all that to your car?!? That’s nothing
@VitaminZ77
4 жыл бұрын
For labor my friend. It will vary.
@xplosivetime8595
4 жыл бұрын
How badly did the cams affect ur fuel economy?
@VitaminZ77
4 жыл бұрын
Eh, hard to measure, but with the tune and bigger injectors and all the other parts, it’s worse than it used to be.
@destienyman
4 жыл бұрын
Any difference in the nismo oil pump i saw the price and really made me thinmg about it
@VitaminZ77
4 жыл бұрын
Antonyy sze yes it’s a great out of the box option for high rev protection and missed shifts. At a minimum I would do billet gears in a Revup housing
@destienyman
4 жыл бұрын
Vitamin Z thanks appreciate it, was looking for input on the nismo oil pump,
@groovy8368
3 жыл бұрын
What rims are those ? Looking to get some fkr my blacked out Z
@Iwwvvaaammm
3 жыл бұрын
370z nismo. I think 09-12
@alecte_
2 жыл бұрын
Hows the rear diffuser treat you ive been looking at that exact set up in the rear for a minute now
@VitaminZ77
2 жыл бұрын
It’s great. It’s been on the car almost 10 years
@alecte_
2 жыл бұрын
@@VitaminZ77 holy shite. Does it come with hardware and where abouts did you mount it cause that was another thing pushing me from going for it. I dont want it to swing around
@VitaminZ77
2 жыл бұрын
@@alecte_ it doesn’t swing around at all. Multiple mount points and hardware included
@alecte_
2 жыл бұрын
@@VitaminZ77 awesome thanks!!
@clearminddrone3532
4 жыл бұрын
My boy had a 292 hp de
@drehart7406
4 жыл бұрын
What all he had done to it?
@Tiiicks
2 жыл бұрын
What did you mean by springs?
@VitaminZ77
2 жыл бұрын
Valve springs
@kevinkurek1103
3 жыл бұрын
What part is right under the lights ? With the 3 holes ?
@VitaminZ77
3 жыл бұрын
Rear bumper diffusers
@KBeez33
3 жыл бұрын
What are those side skirts
@VitaminZ77
3 жыл бұрын
Voltex
@doriftuh7331
3 жыл бұрын
What front bumper is that
@VitaminZ77
3 жыл бұрын
Chargespeed type 1
@fjcxucgkhcfoj3990
3 жыл бұрын
Whats the biggest cam i can do on stock internals?
@VitaminZ77
3 жыл бұрын
I’m not entirely sure on that.
@jaimeb7861
3 жыл бұрын
Anyone know the name of the rear wing?
@VitaminZ77
3 жыл бұрын
Stardast Carbon Fiber Duckbill
@cosmicentity1324
4 жыл бұрын
Came here to hear it but guess not.
@VitaminZ77
4 жыл бұрын
Check the channel. There’s lots of videos of how it sounds.
@jaimefuentes4632
3 жыл бұрын
Are you running spacers on the car?
@VitaminZ77
3 жыл бұрын
No sir. Was running the 10.5 square setup
@jdmislife5372
3 жыл бұрын
Is this a de ?? Lowkey looks like one
@VitaminZ77
3 жыл бұрын
Hood is open lol high key is a DE 🤘😎
@jdmislife5372
3 жыл бұрын
@@VitaminZ77 nice , the bumper threw me off as a hr body z
@sosrecords2117
2 жыл бұрын
What are the wheels called
@VitaminZ77
2 жыл бұрын
These are OEM 370Z Nismo wheels
@ihackmobile
4 жыл бұрын
What rear difuser is that? ♡
@VitaminZ77
4 жыл бұрын
ihackmobile voltex
@Zswag22
3 жыл бұрын
How many miles do you have?
@VitaminZ77
3 жыл бұрын
About 109k at the time I filmed this
@jokerstruepain6218
3 жыл бұрын
Is it your daily?
@VitaminZ77
3 жыл бұрын
It isn’t.
@codyshirey6681
4 жыл бұрын
What did z1 charge for labor on the cam install?
@VitaminZ77
4 жыл бұрын
I’d have to go back and look. They did several other things for me while it was apart as well. Probably somewhere around $1500 if it was cams only.
@codyshirey6681
4 жыл бұрын
Vitamin Z just curious I was quoted $5,000 from them lol.
@VitaminZ77
4 жыл бұрын
For only cams and nothing else at all?
@codyshirey6681
4 жыл бұрын
Vitamin Z I have a vortech v3 supercharger also they said they would charge extra to pull some of it off and reinstall
@Ty-uq6cn
2 жыл бұрын
What wheels are those ?
@VitaminZ77
2 жыл бұрын
OEM 370Z Nismo wheels
@ivansandoval9119
3 жыл бұрын
M I N T z 🥵🥵
@xploration1437
Жыл бұрын
Why not a G35?
@CesarRodriguez-ed8tj
4 жыл бұрын
Labor?
@VitaminZ77
4 жыл бұрын
Cesar Rodriguez it will vary but expect around $2k
@marcoscan9706
4 жыл бұрын
Bruh😍😍💦
@Mysohvaperuna
4 жыл бұрын
Rims are f bueno
@gman2478
3 жыл бұрын
Should you cam your 350z? Uh Yea.
@VitaminZ77
3 жыл бұрын
Facts! 😂
@gman2478
3 жыл бұрын
Haha. Do all the cams for DE sound the same or no? As far as 272 go? Where did you get or find Nismo oil pump? If you can't what's the best or better alternative? 8k rpm is your max? You rev it to there all the time or not? No problem for the amount of time you've had it?
@epicfilmer123
4 жыл бұрын
Instagram?
@VitaminZ77
4 жыл бұрын
epicfilmer123 @zora_the_z33
@M2.diablo
2 жыл бұрын
No
@flyingbutts50
3 жыл бұрын
My guy is this original paint?!
@VitaminZ77
3 жыл бұрын
Yes it is, sans the aftermarket stuff of course
@Eatingsakurasass
3 жыл бұрын
Fire DE🔥
@VitaminZ77
3 жыл бұрын
👏👏
@6feetoveryou
4 жыл бұрын
Revved to 8k?
@osieltorres4595
4 жыл бұрын
Already does that with a tune
@6feetoveryou
3 жыл бұрын
@@osieltorres4595 a DE can't rev to 8k without rod bolts. That's what I was hinting to see if he did that.
Пікірлер: 197