Super cool scale toyota, love the frame on the back! 🔥
@brsrc759
4 жыл бұрын
Finally somebody touches on the subject of the steering tierod needing to go to the passenger side wheel.
@michaelhudson3445
Жыл бұрын
really like the music... nice video man seriously cool.
@jeremyoshea7941
2 жыл бұрын
I just did the cantilever mod using your ideas, works awesome just need to cut the bed of the truck now
@TheSmallerCrawlers
2 жыл бұрын
That's awesome!
@rccrawlerworld
4 жыл бұрын
Sooo realistic mate. Love the video.
@TheSmallerCrawlers
4 жыл бұрын
Thanks! :)
@genemaster74
4 жыл бұрын
G'day m8....just goes to show....with some leftover bits and a covid to keep ya house bound,......Brillance like this comes up......Cheers m8 for the gander at ya cantilever set up...from ya ol m8 here Downunder!!
@TheSmallerCrawlers
4 жыл бұрын
Thanks. I actually did this build long before Covid was ever thing. I had this video on my old channel and just moved it over to my new channel. I will be making an updated video soon. A lot has changed with this truck.
@camrowdrone6497
4 жыл бұрын
Just got the blue one ,watching and learning 👍🏻
@theminiatureconstructionco4556
4 жыл бұрын
WPL are very good value for money. You don't have to spend much more on them to get them to perform! 👍
@TheSmallerCrawlers
4 жыл бұрын
Very true.
@markpreston8273
3 жыл бұрын
Hi I thought your cantilever rear suspension was a really good idea so using the pictures/video that you provided I made the same system for my Fayee Fy002 and I'm very pleased with the results gaining much needed travel and awesome articulation, have you tried doing the same for the front? do you think there would be any benefit to it? Thanks very much for the time and effort it takes to share this very useful information, much appreciated! Mark from Tasmania.
@TheSmallerCrawlers
3 жыл бұрын
Yes if you did the front suspension too then you would gain a lot more suspension travel just like in the rear. I don't think the truck needs that much articulation so I just decided to only do the rear.
@markpreston8273
3 жыл бұрын
@@TheSmallerCrawlers Ok I think I will give it a go, my Fy002 with rear cantilever suspension lifts its front left wheel (your drivers side) when turning left did your C14 do the same? I think this is due to torque twist, what do you think I can do to limit this?
@jeremyoshea7941
3 жыл бұрын
I wouldn’t mind trying to come up with a way to do cantilever In the front but I think you would have to have a shark or a stabilizer for the steering I don’t know I’ll try to do the back first
@toddgreen3162
2 жыл бұрын
What gearbox did you use
@RandomProjectswithSam
3 жыл бұрын
Great Idea!
@michaelmcdonald1620
3 жыл бұрын
nice! what electronics are you running?
@TheSmallerCrawlers
3 жыл бұрын
This truck has a FlySky 3ch receiver and the cheap $10 chinese 20A esc with no drag brake. I use a FlySky GT3B to drive it.
@jeremyoshea7941
2 жыл бұрын
I cannot get that styrene tube to Bend without kinking? What’s your secret? Lol thanks a bunch for your insight! And mods ideas
@TheSmallerCrawlers
2 жыл бұрын
I wrapped aluminum foil around the tube but exposed just the plastic at the bend. Then use a hot air gun on low setting and as soon as the plastic is plyable you have to bend it and set it. Too much heat will cause it to kink.
@jeremyoshea7941
2 жыл бұрын
@@TheSmallerCrawlers hey thank you, thank you for replying to! Makes sense now, I’m new with the styrene, that really helps, trick of the trades…
@TheSmallerCrawlers
2 жыл бұрын
@@jeremyoshea7941 yeah I messed up a few times before I came up with a method that worked. I also remember I had to tape a metal funnel to my hot air gun to focus the heat on a small area.
@maciejmikitow7705
2 жыл бұрын
What rims are these? They look sooooo nice
@TheSmallerCrawlers
2 жыл бұрын
They are 3D printed method beadlocks.
@RuEmileo
3 жыл бұрын
Is that the stock bumper?
@TheSmallerCrawlers
3 жыл бұрын
Yeah it is the bumper that comes with the C14.
@nickward5190
4 жыл бұрын
Now can I get this custom made link rods on thingiverse bud ? As I'm bin trying every were as I got the link arms but there a lot thicker then yours and I have a 2 speed gearbox the same and the rods on the sorve side it's in the way the sorve is and it's doing my head in bud
@TheSmallerCrawlers
4 жыл бұрын
The suspension links in this video are the stock plastic links that come with the truck. They should work just fine with the 2 speed.
@JackOnly21
3 жыл бұрын
Nice work... 👍👍👍
@TheSmallerCrawlers
3 жыл бұрын
Thanks :)
@jeremyoshea7941
3 жыл бұрын
You are a genius I hope you don’t mind me asking to copy your idea I like the stock component to myself those other links are Way out of proportion for scale
@TheSmallerCrawlers
3 жыл бұрын
I dont mind at all :)
@candiceharber2909
3 жыл бұрын
50$ on Banggood right now. Then how much to make it actually worth playing with
@TheSmallerCrawlers
3 жыл бұрын
Probably another $50 to $100... Depending on how you want to build it.
@Matty_Strike
2 жыл бұрын
Can you put a link to the wheels
@TheSmallerCrawlers
2 жыл бұрын
They are on thingiverse. I custom 3D printed them.
@edwinnepomuceno5177
Жыл бұрын
Brooooo where can i get that kind of beadlock?
@TheSmallerCrawlers
Жыл бұрын
They are 3D printed wheels. Not a real beadlock though.
@edwinnepomuceno5177
Жыл бұрын
@@TheSmallerCrawlers ohh where can i buy it it looks so gooooooodddd
@daniela1483
4 жыл бұрын
You dont thinking about made that cantilver better for 3d printer? some one can use your projects or you can made is better
@TheSmallerCrawlers
4 жыл бұрын
This works just fine. It does not need to be made better.
@NyamukBalaprc
3 жыл бұрын
very nice
@TheSmallerCrawlers
3 жыл бұрын
Thanks
@luckybaptista4029
3 жыл бұрын
Where did you get your rims
@TheSmallerCrawlers
3 жыл бұрын
I 3D printed them
@rccowboy709
4 жыл бұрын
Do you know we’re I can find the bed for it
@TheSmallerCrawlers
4 жыл бұрын
You can buy body parts from WPL-RC.com but they are not taking orders for another couple weeks.
@rccowboy709
4 жыл бұрын
The Smaller Crawlers ok thanks for all your help by the way I can’t wait to start my build
@Jacobp_RC
3 жыл бұрын
Metal links look more to scale buddy
@TheSmallerCrawlers
3 жыл бұрын
It really depends on which links you get. WPL metal links from the C34 do look more scale. But there is a cheap set of metal links a lot of people use that are just too big and dont look scale at all.
@toddgreen3162
2 жыл бұрын
And what engine
@TheSmallerCrawlers
2 жыл бұрын
In this video, the truck has a 370 size motor with the 2 speed gearbox.
@MCBESTGEMETVYoung_Best
3 жыл бұрын
где такие колеса купить?
@TheSmallerCrawlers
3 жыл бұрын
English please.
@MCBESTGEMETVYoung_Best
3 жыл бұрын
@@TheSmallerCrawlers where can I buy such wheels?
@TheSmallerCrawlers
3 жыл бұрын
These wheels were 3D printed. The file is on Thingiverse.
@MCBESTGEMETVYoung_Best
3 жыл бұрын
@@TheSmallerCrawlers The discs are printed and how you colored it and how the two can share technology in the Commons!
@TheSmallerCrawlers
3 жыл бұрын
Its one single 3D printed wheel that I painted by hand.
@brappineau4161
Жыл бұрын
What wheels are you using?
@TheSmallerCrawlers
Жыл бұрын
I literally said in the video. They are 3D printed
Пікірлер: 65