Corrections: 1. DEITY THEOS does NOT have limiters 2. My latency measurement was incorrect. However, we did not experience any practical, noticeable latency issues 3. Shure clarifies that the SLX-D transmitters do have a limiter in this sense (quote from SHURE), "The SLX-D transmitters do have a built in limiter, but it’s only relevant in the context of transmitter user gain (positive mic offset). For example, if the user applies 20 dB of transmitter gain and pumps in a signal at -10 dBFS, the limiter will pull back on the applied gain and only apply 10 dB of gain instead of the full 20 dB. In any other use case, the maximum digital signal level should align with the ADC clip point, that is, the hardware clip point, so the limiter is irrelevant as the audio input cannot exceed 0 dBFS."
@Burrfection
11 күн бұрын
I do not need a system this robust. Just enjoyed the review.
@curtisjudd
10 күн бұрын
🙏
@DJLeo_Eddie
Ай бұрын
Hi Curtis. Thanks for this awesome review! It was very informative. What “pack” were you using when you did your range test? The SLXD1? I’m curious to see what the range of the SLXD3 is using the various mA settings, 1mA, 10mA, and 30mA? Thank you!
@creativegreatsvisuals
3 ай бұрын
What Shure receiver would I need to make this system dual channel into a mix pre 6ii ? What are the advantages of going with a single receiver and not dual channel like this kit for a 2-3 camera set up for corporate commercials and corporate interviews?
@hannesdilzer
8 күн бұрын
you need the whole set twice :)
@locoloc4sho
4 ай бұрын
Curtis, your reviews are the best. Thank you ! Question, what parameters do you have set on the plug on transmitter when using your MKH50? Currently, I'm using a 442/744 combo... I currently have two Lectro UM400a and have my gain structure set to cater to that system, I grabbed 4 of these SLXD wireless, one of them with the plug, but noticed my gain structure had to be completely restructured for Shure... Maybe I'm just accustomed to using Lectrosonics, making changes with Shure felt new to me.. Have you ever played with this wireless system paired with a 442? ..... I know, I know... It's old, but I love how my MKH 416t sounds on it... Oh, also, forever I thought T-Power was 12v ... I switched to 12v on this wireless plug, and it doesn't work... Bummer for me..
@daltonjazz
5 ай бұрын
What are your thoughts comparing this to the EW-DP in terms of sound quality and signal? I'm looking to do something very unconventional and use a system like this or the EW-DP for a mobile wireless horn microphone for small venue live gigs (so either the Shure SLX-D portable with a Beta 98h/c or the Sennheiser EW-DP with their E908b)
@curtisjudd
5 ай бұрын
I prefer the SLX-D but I haven’t tried an EW-DP plugon transmitter.
@user-sd6vt5tv8f
5 ай бұрын
What are your recommendations for singers and performers that don’t want to hold a microphone ?
@curtisjudd
5 ай бұрын
Headset mic
@elanlafontaine4406
5 ай бұрын
Hi Curtis. Do you happen to know whether the SLXD3 can take a line input, as well as mic input? Primarily considering it as a cost effective, second wireless boom to my AD3, but for situations where 2 booms aren't needed, would also love to use it as a camera hop transmitter receiving a main out line level signal from my Zoom F8NPro.
@curtisjudd
5 ай бұрын
Yes, I believe it can.
@benson200310
5 ай бұрын
Really nice high quality review Curtis, like aways! We do hybrid events and Shure SLXD is one of our favorite solutions for wireless mic. And finally now.... the video guy friendly version is here! 🎉
@sebastianscharnagl3173
5 ай бұрын
Hi Curtis! Thank you for the great introduction to the new Shure components! We’ve also just tested the receiver and some transmitters for some days against the Sennheiser G4 (analog). We’ve come to the conclusion that the SLXD5 receiver is very solid technically, easy to use and that it has great features (like estd. runtime for both the transmitters and the receiver in hours and minutes). But: The Sennheiser G4 really is audibly quieter. For that we used the SLXD1 beltpack transmitter and the SLXD5 receiver versus the Sennheiser G4. We tested both with two Sennheiser MKE2 (on the Shure TX with an adaptor). So we could really compare the quality of the transmission rather than the quality of the respective microphones. The Shure exhibits not much noise overall (which is good), but audible and visible noise in the spectrum around 8 to 12 kHz. It’s a broadband hissing. I’d consider the system really really good, though. But eventually the Sennheiser system is cheaper by a lot. Okay, it lacks usability features but what matters in the end is the audio quality. The results were almost the same comparing the feed of an SLXD3 transmitter on an Audio Technica AT4053b. The 10kHz hiss was the same, and it was not there when we cabled the mic directly to the mixer. Nevertheless the Shure system is less prone to interference, that might be a pro - you either have a signal or you don’t. Where with the Sennheisers the analog transmission quality can gradually decrease with distance, or you can just pick up more noise, which you might first realize after recording. The decision was hard for me, but in the end I sent the Shure transmitters and receivers back. I want to step up my audio quality and the Shure set doesn’t deliver that. Although the Shures are really easier to use. I consider the beltpacks also easier to hide as they’re rounded and flat against the rather bulky Sennheisers. Just a bit of additional information: We do a lot of live shows and online streaming with the SLXD rack mounted receivers, their SLXD1 beltpacks and SLXD2 handheld mics for years now. Also I do audio for video more or less professionally. We tested using MixPre 6 II and analyzed everything in adobe audition after matching levels. 🙂
@YummyGastronomy
5 ай бұрын
Thanks very much for sharing, very helpful indeed.
@YummyGastronomy
5 ай бұрын
Thanks Curtis for another fantastic review! I've been using the EW-G4 system with MKE2 for shooting recipe vids for 2 years and recently started experiencing some RFI causing a pretty nasty spike (complete with harmonics, making a repair pretty impossible when it happens mid-sentence). This happens at random intervals, causing a clipped pop every few minutes, from an unknown source somewhere nearby. My problem is further aggravated by a recent addition of an induction stove which absolutely kills the RF link of the analogue EW with all sorts of nasty artifacts, but NOT effecting the mic cable, nor a Zoom H6 with either the Zoom shotgun capsule at 30 inches from the stove, nor an SM58 plugged into it). The ability to use a wireless setup is immensely helpful in my situation and so after watching your truly excellent EW-DP review, ordered one but haven't received and tested it yet. Question: would you venture forth a wild guess as to which of the two digital systems between Shure and Sennheiser has the more robust RF link and would be more immune to the nasty RFI / EMI I'm trying to get rid of? Any other suggestions for my working conditions (shooting both in/outdoors, one man crew!) keeping the cost per audio channel under $1500? Many thanks in advance for your valued help!
@Nomad_Audio
5 ай бұрын
I recently started moving my wireless from Lectro over to Shure Axient. It really is a remarkable system...Shure is definitely at the top as far as stable wireless transmission is concerned, and the quality of digital is as close to a cable as possible. This is a very exciting product - I'm actually considering swapping my wireless boom over to this SLX system because of price (spending Axient money on a bag based wireless boom system feels a bit out of reach). The plug-on tests sound good to my ears, which is very encouraging.
@curtisjudd
5 ай бұрын
Agreed on all counts. 👍
@neilgibb5265
5 ай бұрын
Great and convincing review. Thanks
@curtisjudd
5 ай бұрын
👍
@SportFlow
5 ай бұрын
Do you need to performe a scan every time you switch on the mics or just once in every location/zone? I mean, most of the times the DTV channels in a similar zone are the same, is it needed to scan every single time? What's your go-to procedure? Thanks.
@curtisjudd
5 ай бұрын
No, but it is good practice and quite fast and easy on this system. But it does keep its settings when you turn it off.
@raphaelroche8100
5 ай бұрын
Hello Curtis, I’m sorry I don’t speak English very well you said you choose «rx outputting line-level signal on mix pre » but why +26db gain on your mixpre? Because it’s not a real line level output? Thanks for your answer
@curtisjudd
5 ай бұрын
It needed some additional gain. Probably “consumer” line level is my guess.
@andreimanilkin5339
5 ай бұрын
Thank you Curtis for actual hardware reviews! Helpful as always.
@curtisjudd
5 ай бұрын
🙏
@matthew.datcher
5 ай бұрын
It looks like Shure finally made massive improvements on the FP system. Reviews of the FP are why I ended up buying a Sennheiser ew100 as my first wireless system for film many years ago. Now it looks like I have to weigh a lot of options when I get around to upgrading.
@curtisjudd
5 ай бұрын
👍
@sebastianscharnagl3173
5 ай бұрын
Hi Matthew, I can really recommend testing beforehand. We compared it just now to the Sennheiser G4 and though Shure is really the nicer device, the audio quality was better on the G4s. We tested both with the same mics (MKE2).
@GrandProductionsMedia
5 ай бұрын
I just received the Theos on Thursday…. got scared for a second lol. I would have liked to hear a sound comparison as I could see Shure wining technically but I’ll take the features, Great video 👌🏾
@curtisjudd
5 ай бұрын
👍
@whiterock1865
5 ай бұрын
Hi Curtis, thank you for the review. I was curious with the Senn EW DP, did it have the latest firmware? I'd be curious if that may make any range difference, I guess to some degree that all do better when there are some walls to bounce signal off from.
@curtisjudd
5 ай бұрын
I reviewed the EW DP shortly after it was released with the latest firmware available at the time.
@whiterock1865
5 ай бұрын
@@curtisjudd I see so it was just a loaner? I finally just received the plugon adapter after months of delays. But I would be curious of the range got any better with firmware updates.
@curtisjudd
5 ай бұрын
@@whiterock1865 Yes, it was on loan from B&H (Thanks B&H!)
@Thomas-eu6fj
5 ай бұрын
Nicely explained !
@curtisjudd
5 ай бұрын
👍
@Thomas-eu6fj
5 ай бұрын
@@curtisjudd Hi Curtis, I couldn't find your email ID so that's why I am writing here. Need your expert advice. I am planning to use a Mixpre 6ii with Arri Alexa mini LF Camera for a shoot and want to know if I need Tentacles to Sync Timecode for both camera and recorder since they both have built in Timecode ? In case if I use Tentacles do they have to be attached to the camera and the recorder all the time. Hope you understand my question. Greatly appreciate your reply. Thank you so much. Couldn't find any of your videos on this subject
@curtisjudd
4 ай бұрын
@@Thomas-eu6fj I haven't worked with Alexa first hand, but I suspect you'll jam sync the MixPre and Alexa at the start of the shoot and should be fine from there, assuming the Alexa Mini has a built-in dedicated timecode clock (and not just a timecode input which syncs the real-time clock).
@Thomas-eu6fj
4 ай бұрын
@@curtisjudd Thank you so much for the prompt response. Yes Arri Alexa has a dedicated Timecode clock
@Thomas-eu6fj
4 ай бұрын
Hi, Sorry for confusing you with my question so let me rephrase it. What I really wanted to know was if I am using a Mixpre 6ii with a camera which has a built in Timecode and to sync both of them do I still need Tentacle Sync or there is a simple way to do it?
@donnelson8524
5 ай бұрын
Great review, Curtis. I recently installed an SLX-D system at our church. We needed just a small system with two dual-channel wireless receivers and external antennas. So far the system has been outstanding. Here are a few observations: 1) Reliability has been solid. We have not had a single drop-out or any staticy weirdnesses since I set it up months ago. It extremely robust. 2) The charging cradles are handy. They are designed so that you can drop in a handheld mic, a body pack transmitter, or just a bare Shure proprietary battery. We leave our microphones switched on all the time and when you drop it into a cradle, it shuts off automatically and begins charging. If we need a mic NOW, just grab it, hand it to whomever needs it, and lift the fader with no fiddling for switches or other things that might slow you down. This is great when working with volunteers. 3) It's nice to see the battery life reported on the transmitter as well as the receiver; we never need to worry. Also, you can name each mic and the name appears on the transmitter and the receiver LCD displays, so they are easily identified. 4) Shure has plenty of information on their website to help make decisions on which bands to buy, which antennas, etc. On one of their web tools we entered our zip code and it tells you how many open channels are available for each of the three band options. For antennas, it will recommend options based on distance of the antennas to the receivers and to the transmitters; we went with external omni antennas with splitters and amplifiers, but there are also antenna distribution systems, sharkfin antennas, etc. 5) The bodypack transmitter pairs great with a Countryman E6 head-worn mic if lavs are not desired. We've found the E6 is much better for gain-before-feedback compared with a lav since the capsule is so much closer to the person's word-hole ;-) Plus they sound great! 6) I was super impressed with each component I bought; Shure doesn't nickle/dime you: Brackets, cables, RF couplers... everything is included in the box. Compared to our previous experience, it felt like Shure thought everything out. I didn't need to go out and buy a bunch more stuff to get everything installed and functional and that was a refreshing change. 7) Wireless workbench was super valuable for finding the best combination of frequencies. Since I set them, we've had zero issues with interference or dropouts. I'm sure other pro systems have similar features, but overall it just feels like a solid, reliable, no-nonsense system. Honestly, we couldn't be happier.
@curtisjudd
5 ай бұрын
Thanks so much for sharing your experience, Don! 🙏
@Kit2Canada
5 ай бұрын
Superb - thank you!
@curtisjudd
5 ай бұрын
👍
@beatsbyandrew
5 ай бұрын
You can use the Shure workbench to coordinate any system though
@curtisjudd
5 ай бұрын
With hardware integration to set frequencies and such?
@productionsoundtexas3949
5 ай бұрын
Shure had the UR series. UR4D+ rack mounted system. (tv studio) UR5 was the portable receiver. (Bag system) Ur1/Ur2 transmitters with cos11d mics. Reliable and versatile system. I loved that system.
@curtisjudd
5 ай бұрын
👍
@Nacho.100
5 ай бұрын
Hi curtis, Did sony uwp-d reach farther distance than shure in your test?
@curtisjudd
5 ай бұрын
They were almost exactly the same when not in line of sight, around 50m outdoors. Both systems NEVER dropped out throughout my entire two story home.
@JJSCTech
5 ай бұрын
Great review!
@curtisjudd
5 ай бұрын
Thanks
@Zack-Hates-Youtube
5 ай бұрын
Yes USB-C!
@curtisjudd
5 ай бұрын
👍
@Zack-Hates-Youtube
5 ай бұрын
Hey Curtis, is the latency noticable enough that you still need to sync in post? And furthermore, if you don't sync it in post, does it get worse over time? For example a 5min video looks fine but a 30min video maybe needs to be manually adjusted like when people mismatch sample rates to their video frame rate?
@curtisjudd
5 ай бұрын
No, not if you feed audio from the receiver to the camera’s audio input. It’ll never drift because it is constantly sending audio to camera while recording.
@aristotle_4532
5 ай бұрын
Shure has always achieved the highest sound quality regardless of cost. I am talking about the audible distortion when the signal is perfect. The difference from other manufacturers is massive. It is audible in speaking voice, but in singing or a music instrument the difference is remarkable.
@curtisjudd
5 ай бұрын
👍
@theearwyrm6105
5 ай бұрын
Didn't realize you were also a fellow Utah Resident. Do you ever do in person lectures?
@curtisjudd
5 ай бұрын
Hello neighbor! Not usually, but would consider it if there’s an audience for it.
@WupperVideo
5 ай бұрын
Still loving my Sennheiser AVX system. I have in total 4 sets (2 with receiver and SKM, 2 with receiver and SK). The receivers are just so small and it’s so convenient to have them all the time plugged into the XLR socket and having the cold shoe still available for a led head light. Great wireless system for news gathering.
@curtisjudd
5 ай бұрын
👍
@SportFlow
5 ай бұрын
They are convenient as you said, but the noise floor ("hiss") and audio quality (lack of bass, compressed audio) is not very good. I compared the avx system with a mic using an XLR cable and the difference in sound quality is abismal. Can't wait to try this Shure system.
@curtisjudd
5 ай бұрын
@@SportFlow which mic were you using? The MKE2s did NOT sound abysmal in my tests.
@SportFlow
5 ай бұрын
I'm using the AVX handheld mic with the cardiodid capsule@@curtisjudd
@travisminneapolis
5 ай бұрын
Planned obsolescence by not having user replaceable antennas... 😢 Single channel also kinda sucks. Would be happy to pay a premium price for an XLR transmitter and a lav transmitter going into this receiver.
@curtisjudd
5 ай бұрын
I would be surprised it Shure could repair broken antennas even after the warranty runs out.
@xdanielpatrick
5 ай бұрын
Hi Curtis, at 11:23 you mentioned the noise on the lav mic/body pack is not so quiet on the Shure system. Have you experienced the same with the Deity Theos and included lavs? Even with appropriate gain-staging (per Diety) I’ve noticed quite a bit of hiss/self-noise no matter with my Panasonic S5II or going line level into my MixPre. I am hoping it’s just the lavs and not something wrong with the wireless kit. Frequencies are pretty wide open here in the 902-928MHz range so I don’t think that’s it. Thanks!!
@curtisjudd
5 ай бұрын
The W.Lav Pro which came with the THEOS kit seemed a little cleaner than the Uniplex in my tests. Not perfect, but not quite as noisy.
@petermcginty3636
5 ай бұрын
Thanks Curtis, i love your programme because i like to learn what is new in the market. Recently, i installed the biggest improvement to my sound chain: thick, plush carpet 😂. Many thanks for your work🎉🎉🎉.
@curtisjudd
5 ай бұрын
Yes, managing sound before it gets to the mic is brilliant!
@philpritchard5173
5 ай бұрын
So glad Shure made this. For filmmakers they sound great indeed that wireless boom mic option is v interesting. I hope they bring out a dual channel. They are so reliable in the music world..why not filmmaking too. I guess if you got the body pack and the wireless hand held thing you've have to choose on or the other to use at a time...or buy two receivers. Makes one realize what a good job Deity did with Theos though as its so full featured.
@aristotle_4532
5 ай бұрын
I gave some young men 3 mke600s, the most noisy shotgun on the market in its mose noisy AA battery mode and zoom f2 units. The two make cheap integrated low weight shotgun systems. I applied traditional noise reduction using a simple plug-in i wrote many years ago and samples of noise I recorded in a very quiet room. It uses many filters but it is not AI. The sound quality was so good nobody believed it was mke600 Wireless adds a lot of noise of the worst type. Mic noise itself is easy to remove without audible artifacts.
@curtisjudd
5 ай бұрын
👍
@TimoSund
5 ай бұрын
And I’m just about to pop in mic shop on next video gig..
@curtisjudd
5 ай бұрын
👍
@jon112media
5 ай бұрын
Yooo!!! We use Shure at my church and I’ve had such a good experience with them that I had been wishing to have something like this! (Yeah that axient looks wonderful but is at a higher price point than what I could afford). Thanks for this video Curtis!
@curtisjudd
5 ай бұрын
👍
@audiobuff
5 ай бұрын
I have there SLX5 (analog) receiver, but it does not do good with the DL4 Dura-plex sub miniature element. Super excited about the SLXD version. Thanks Curtis for the review!!
@curtisjudd
5 ай бұрын
Thanks for the note on that, Audio Buff, good to know!
@Rivenworld
5 ай бұрын
The Plug-on sounds a lot better than the Bodypack (possibly due to the mic used), nice system though, thanks for sharing.
@curtisjudd
5 ай бұрын
👍
@GrandProductionsMedia
5 ай бұрын
Shotgun mics will almost always sound better, I invested in good shotgun mics before I even looked into getting lavs, they are cool, quick and portable but shotgun whenever possible
@curtisjudd
5 ай бұрын
@@GrandProductionsMediaagreed!
@richardsisk1770
5 ай бұрын
Excellent review. Thanks Curtis!
@curtisjudd
5 ай бұрын
Thanks Richard.
@cameraheadstudios
5 ай бұрын
Thanks Curtis for this video. I was hoping you would cover this system. It's a system that a lot of us should look into.
@curtisjudd
5 ай бұрын
👍
@cwichura
5 ай бұрын
Even if you are using Axient for recording, this new receiver could make a nice camera hop or IFB solution. And WWB/AD600 will easily handle the frequency coordination across both systems combined.
@curtisjudd
5 ай бұрын
Good point, thanks Christopher 👍
@johanvanvuren
5 ай бұрын
Wait, did you say the Deity Theos TX has a limiter built in?
@DavidKfilmmaker
5 ай бұрын
That made me ponder that I’m missing something.
@philpike6177
5 ай бұрын
it was my understanding that it doesn't have a limiter.
@curtisjudd
5 ай бұрын
My mistake, THEOS does not have a limiter. And, I was informed today that while they don’t say anything about it in the user manual, the SLX-D has a limiter though it isn’t clear to me whether it is analogue or digital.
@busyak
5 ай бұрын
I always thought for film/TV the top of the line was Lectro or Zaxcom, but not long ago I went to a union event here in NYC and most of the old union mixer pros had Shure systems.
@curtisjudd
5 ай бұрын
Yep, a lot of location sound for video people don’t realize how ubiquitous SHURE wireless is in installed and venue sound.
@bcalenda2609
5 ай бұрын
Because Shure has the best range for transmission, best RF congestion high density freq spacing, showlink (when it works), and great quality. Axient system. The other pro level systems have a few other different features like Audio Ltd widest frequency tuning range for RF heavy areas or if you travel all the time.
@creativegreatsvisuals
3 ай бұрын
Do those that do corporate commercials use Shure though ??
@curtisjudd
3 ай бұрын
@@creativegreatsvisuals Some use SHURE Axient Digital, yes. And many others wish they could. It isn't cheap.
@creativegreatsvisuals
3 ай бұрын
@@curtisjudd I was looking at the Shure adx5d or the Lectrosonics DSR Two-Channel Digital Slot Receiver to build up from ? im from California and during the time ive spent in L.A. I would see a lot of sound professionals with lectros in their kits
@adobemastr
5 ай бұрын
Thanks, Curtis. The SLX-D1 lav mike, with your voice (1:32), sounds terrible! The plug in adapter sounds great, though. Emma's voice sounds better with the SLX-D1 but still, substandard to my ears. The plug in adapter sounds good with her voice as well.
@pjshulsky
5 ай бұрын
This was a poor showing for the uniplex, I agree it did not sound great, and the noise floor was shown by Curtis to be quite high 😢
@DavidKfilmmaker
5 ай бұрын
My first thought was that sounded bad. Meaning the lav/body pack setup.
@aristotle_4532
5 ай бұрын
@@pjshulskyCurtis has a very soft voice as you would expect from such a gentle character. His sample always has more noise.
@pjshulsky
5 ай бұрын
@@aristotle_4532 I was referring to the measurement made in the video
@aristotle_4532
5 ай бұрын
@@pjshulsky Some mics are excellent for high level sounds but very bad with soft voices when the limitation is the noise floor.
@djvphotography
5 ай бұрын
I am confused regarding the stated latency time of 3.2 ms because at the 3:30 mark of the video you show (and circle) the value of "0:00.032", which should mean 0 minutes, 0 seconds and 32 milliseconds.
@Richard_Bumblebee
5 ай бұрын
No that's 3.2 milliseconds not 32. Go look up any second to millisecond converter, type in 0.0032 and it'll say 3.2 milliseconds. You have to remember you're measuring in milliseconds not seconds. So that mean you move the decimal point over making it 3.2 not 32. If it was microseconds you'd move the decimal over another another 3 spaces and have 3,200.0 microseconds.
@djvphotography
5 ай бұрын
@@Richard_Bumblebee The number circled in the video is not "0:00.0032". It is "0:00.032". Look for yourself.
@aristotle_4532
5 ай бұрын
A latency test would use a wired mic and a wireless mic, at the same distance and on the same recorder and the result would match the spec. There would be no video used at all. This is a video issue, timecode bug, user error, etc.
@curtisjudd
5 ай бұрын
Yep, my mistake, need to do this test more carefully. At any rate, no noticeable offset when recording to camera from a practical perspective.
@aristotle_4532
5 ай бұрын
@@curtisjudd In a perfect world 3.2msec of latency would actually be halpful. It is about 40 inches at the speed of sound, so with a lavalier, it would make closeups and medium shots more natural in terms of lip sync when using wired headphones. With speakers, zero delay works better at close distances and negative delay in the theatrical closeups for cinemas. There used to be many theories on how these should be handled on the big screen but the mind probably compensates and has high tolerance to delay differences.
@diciannove1100
5 ай бұрын
was about to get sony uwdp series and you dropped this video! so many choices!!!
@sloop24
5 ай бұрын
I'm also.considing getting the Sony d21 or d26, I think Im still leaning to Sony. What do you think you will get
@curtisjudd
5 ай бұрын
May still be the right choice for your use case. If you’re not planning to run more than 2 channels and especially if going directly into a Sony camera, UWP-D is great.
@diciannove1100
5 ай бұрын
@@sloop24i want it to run straight into cam for a gimbal set up so most probably the Sony. I just need a backup system to replace my old uhf and i cant decide cos of the investment costs.
@candyartstv
5 ай бұрын
Erm… first? Anyway, this could well be the upgrade to my rodelink kit. Though definitely should have been a dual channel receiver, so may hold off until something else comes along. Nice review.
Пікірлер: 126