The larger screw on SM-58 capsule is an ORIGINAL SHURE!! capsule but it's a older model
@edgarsteenwinkel1970
2 ай бұрын
Thank you! Mystery solved.
@S3Raziel
2 жыл бұрын
thanks so much for making this video! I'm trying to DIY a wired handle for this interchangeable mic capsule because the brand name one is $200 where I live and this was super helpful. currently am trying to figure out if it would be possible to directly wire the gold contacts to the wires in a TRS or XLR cable
@edgarsteenwinkel1970
2 жыл бұрын
Wow good luck! Let us know if it works and send a picture!
@hermesrangelc.3155
Жыл бұрын
Thanks for the video, it was useful for me.
@jesusgabrielmoralescanto9935
2 жыл бұрын
Muchas gracias hermano te hagradesco mucho tu video
@justinpaz93
2 жыл бұрын
Question! I touched the small round foam ontop of the cartridge and it broke into pieces (disintegrated) is my microphone at risk or it’s still good ??? Please help im pretty worried
@edgarsteenwinkel1970
2 жыл бұрын
It will be fine. Just make sure the foam pieces did not move around and are not stuck inside the cartridge, on top of the membrane. That will muffle the sound. I’ve had that happen. Once all the disintegrated foam is removed, the mic will sound fine. Good luck!
@Mooff2
11 ай бұрын
Should be able to get some sound out of the red and green wires to see if it’s the capsule or the board.
@phatjopoulos
Жыл бұрын
its ironic how low the audio level is considering this must be someone who deals with audio professionally, but thanks for the video
@jestersantillana4872
Жыл бұрын
Question where is the positive and negative terminal in 3 round copper. There is an inside terminal 2nd round terminal and 3rd terminal
@edgarsteenwinkel1970
Жыл бұрын
Sorry, I don’t know why there are 3 rings. There are only two wires coming out of the round circuit board, red and green. You can see this in the video at 4:55.
@thiagocursinomusic
Жыл бұрын
Why are microphones so expensive? The parts are so simple.
@valkostoyanov3513
3 жыл бұрын
I need help 😔 with my sm58 this yellow plastics it's wire? Or tape?
@edgarsteenwinkel1970
3 жыл бұрын
It’s an ultra-thin wire, stuck to the yellow tape. Thinner than a human hair. I was able to pry it loose with tweezers and bridge a burnt spot with a piece of thin copper wire that I soldered over the gap. I used a magnifying glass for the soldering. It probably changed the impedance of the microphone but it is working again. Hope this helps.
@raoulrondel
3 жыл бұрын
Merci pour ton partage cela m’a éclairé, merci
@edgarsteenwinkel1970
3 жыл бұрын
Bonne chance!
@jabaricallan4939
3 жыл бұрын
i know Im kind of off topic but do anybody know of a good site to watch newly released series online?
@pedroemmett3509
3 жыл бұрын
@Jabari Callan lately I have been using Flixzone. Just search on google for it =)
@tobyhouston2514
3 жыл бұрын
@Pedro Emmett Definitely, I've been watching on flixzone for years myself :)
@jabaricallan4939
3 жыл бұрын
@Pedro Emmett Thank you, I signed up and it seems like a nice service :D I really appreciate it !!
@batboyboy
2 жыл бұрын
I have a question, I have a sm 58 model no LCD, I want mod to the receiver, the original receiver is gone. Can I do it?
@edgarsteenwinkel1970
2 жыл бұрын
Your microphone transmitter should have a label somewhere (under battery cover?) with its frequency or frequency code. Then find a used Shure receiver with that same frequency.
@dafinstruct
2 жыл бұрын
But what's inside the capsule?
@edgarsteenwinkel1970
2 жыл бұрын
A membrane and a magnet.
@dilqem1986
2 жыл бұрын
Salam. Slx2 yes?
@edgarsteenwinkel1970
2 жыл бұрын
ULX2.
@AsilisM
Жыл бұрын
it seems like chinese fake. Real SM58 has have inner tripod shape supporter.
@Kochog-Kobochog
Жыл бұрын
It isn't sm58
@jazzmodern
Жыл бұрын
it's the first gen wirelsss capsule from the 90s -00s.
@hardlife8026
3 жыл бұрын
chinese copy, looks like
@jazzmodern
Жыл бұрын
it's the discontinued model used from the 90s to the early 00s.
Пікірлер: 34