Here's a tutorial on a 2013-2019 Ford Escape Side Mirror Replacement. This is for the whole housing.
AMAZON LINKS:
- Plastic Trim Tool Kit: amzn.to/3sAWhxr
Requested by user N Gaming Hub, here is a tutorial on accessing and removing the hardware necessary to replace your side mirror on your 2013-2016 Ford Escape / Kuga. This is best achieved by removing the interior door panel as shown here.
TOOLS NEEDED:
- 7mm driver
- Small flathead driver
- T30 Torx Driver
- Trim tools (plastic / non-marring)
TORQUE SPECS:
- T30 screws = 8 Nm = 71 lb-in
#2013fordescapesidemirrorremoval #howtoremoveasidemirror #howtoescapewithrahrena
CHAPTERS:
0:00 Introduction
1:04 Remove latch cover panel and
1:30 Remove window control panel
1:52 Disconnect window control wire harness with small flathead screwdriver
2:05 Remove the QTY 2 x 7mm screws
2:18 Remove the red reflector and 7mm screw from door side
3:27 Disconnect any remaining connections to the door panel
4:05 Lift away interior door panel!
4:15 Remove interior side mirror cover panel
5:32 Disconnect side mirror wire harness
5:48 Remove QTY 3 x T30 Torx Screws
6:02 Lift the bottom of the mirror assembly and remove it
6:31 Install your new mirror assembly
7:11 Reinstall wire harness
7:19 Reinstall your side mirror interior cover panel
8:07 Reinstall door panel on window edge with window control pulled through the access hole
8:14 Press lower door panel point tabs back into door body
8:18 Reinstall lower 7mm screw
8:27 Reinstall QTY 2 x 7mm screws behind door handle
8:34 Reconnect and reinstall window control panel. Insert front and rock downards.
8:41 Reinstall the 7mm screw behind the main door latch and reinstall screw
Негізгі бет Side Mirror Replacement for 2013-2016 Ford Escape: HOW TO ESCAPE
Пікірлер: 47