This is a Fire Training Video is for our Siemens fire alarm system. This tech will go through the process of how to operate the SIEMENS Main Fire Alarm Panel. This is for entertainment only. Please consult a fire alarm specialist.
In the Generator Room you will find the SIEMENS Main Fire Alarm Panel you will see to the top left a Black panel with Six Buttons. 3 Buttons next to 3 Buttons:
• The FIRST BOTTOM BUTTON: is to ALL EVAC: if you push this button it will send out a warning throughout the building to EVACUATE THE BUILDING alarm. "MAY I HAVE YOUR ATTENTION PLEASE..... MAY I HAVE YOUR ATTENTION PLEASE -- THERE HAS BEEN A FIRE EMEGENCY REPORTED IN THE BUILDING!!"
• The SECOND BOTTOM BUTTON: is to EMERG PAGE: if you push this button, a GREEN light will come on. You will need to hold microphone in hand.....hold for 3 seconds then say a message to all RESIDENTS. "THIS WAS A FALSE ALARM"... "WE HAVE A LOST CHILD", "THE BUILDING IS OUT OF WATER, DUE TO A WATER MAIN BREAK". When finished press the second button to hang up, Green light should go off.
• The THIRD BOTTOM BUTTON: is to SELECT EVAC: if you push this button it will send out a warning to a selected area
• The FOURTH BOTTOM BUTTON: is to SELECT EVAC: if you push this button it will send out a warning to a selected area
• The LAMP TEST BUTTON: is to TEST ALL LIGHTS: if you push this button it will send out a warning throughout the building.
To the right of that is a BLACK control panel is a Orange/Grey 12" LED screen with 14 Blue buttons on it. On that panel 4 buttons on top and 4 buttons on the bottom and 6 buttons on the side. Most of the BOTTOM buttons are used by staff. In this panel will light up in red where the problem is.
This is a Fire Training Video for out Siemens fire alarm system. He will go through the process of Siemens fire alarm system:
BOTTOM 4 BUTTONS
• The FIRST BOTTOM BUTTON: is to ACKNOWLEDGE the an alarm. If there is NO FIRE or emergency Press.
• The SECOND BOTTOM BUTTON: is to SILENCE the an alarm. Press button when there is no emergency.
• The THIRD BOTTOM BUTTON: is to UN-SILENCE the an alarm. Press button if there is emergency.
• The FOURTH BOTTOM BUTTON: is to RESET the an alarm. When everything is good. The panel will not reset until the Pull Box or other devise has been reset.
Негізгі бет SIEMENS Main Fire Alarm Panel
Пікірлер: 21