Can we select the constraint then select geometry?
@Bizlearn_Siemens_NX_Training
4 жыл бұрын
Hi Shane, yes you can. And you can also select several objects at once. The multi-selection considered at 12:00 is obsolet, or so to say there is a different solution available when selecting the constraint first. Thank you for the question. I haven't considered that (-; Best regards, Simon
@avula.vishnuvardhanvishnu5665
Жыл бұрын
@@Bizlearn_Siemens_NX_Training SIR I HAVE A DOUGHT in nx ug can we have a posssible to give constraints nd dimensions to ( sp line by poles) in sketch like solid works sir plz tellme plz give me ur mailid sir plzz ...
@gryn1s
2 жыл бұрын
This is amazing. I have used NX few years ago, have come back now, and its nice to see it advanced to much. NX is now not only more infinetely powerfull than competition, but much more comfortable and easier to use as well. If solidworks and likes wont step up their game, NX will take over their market as well.
@gregoryvanhulle3607
3 жыл бұрын
I really like the new sketcher. Would not know about it, but thankfully I found this video. Thanks!
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
You're welcome (-: have fun
@Shambbler
4 жыл бұрын
A few details you have covered are already known from solidworks like sketch region. It's very useful for checking if the sketch is fully closed. Anyway I'm impressed with the improvements!
@Bizlearn_Siemens_NX_Training
4 жыл бұрын
I am not sponsored by Siemens, so I can be honest. It is a huge improvement I am looking forward to use every day as an engineer
@h2w..
3 жыл бұрын
It does not show constraint's icons if you did not select the line - that is pain of the head imho.
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
Why shall constrains be displayed? Degrees of freedom are declared via specific colors...
@jamesowens7176
2 жыл бұрын
Very nice! Thanks!
@dielaughing73
2 жыл бұрын
12:20 F4 is a handy 're-do' command in Excel and maybe other Office apps too. It saves some time when editing plots, for example (though it only works sometimes)
@sourabhg5418
3 жыл бұрын
finally i am liking nx sketcher.
@stephanelouvet1113
2 жыл бұрын
Nice ! Can't wait to use it ! :) So cool the extrude value from start ! This one came to my mind several times !
@ANKITKUMAR-cm6wo
3 жыл бұрын
Hi, Thanks for this great video... It is very much helpful... Can you upload some videos for NX new update; NX 1953. It has some new changes.
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
Coming soon... The NX1980 will be released soon and videos will follow
@sourabhg5418
2 жыл бұрын
I have switched job and found that no sketcher matches with creo sketcher. I have switched to NX 1851 from Creo 4.
@Bizlearn_Siemens_NX_Training
2 жыл бұрын
Does it have to match?
@hp7557
2 жыл бұрын
Very inspiring indeed.. Cute
@sdttnkara
3 жыл бұрын
I am about to move to NX from solidworks. I think it is right time to move with these new updates.
@AlojzyZyrokompas
3 жыл бұрын
It isn't.
@squeakyknee
2 жыл бұрын
Nope, the new version is worse. More bugs.
@TheFozzwad
3 жыл бұрын
Odd that I got this video when I searched for why the sketcher is SOOOOO MUUUCH slower in NX1919 (1899, whatever) than in previous versions of NX. Especially since this sounds like an advertisement for NX.
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
Well... I think at least maybe the workflow matters. It took some time for me to learn the new sketcher. And yes... Siemens has measured up to 30% time savings, that's my impression as well in some cases. I am saying that as a Siemens competitor 🙈
@TheFozzwad
3 жыл бұрын
Yeah sorry. The problem is not the sketcher itself. When I click the finish sketch button - it's a full minute before it finishes thinking and let's me move on.
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
Aehm... Sounds weird... Is your hardware up to date?
@jonasschmid1014
2 жыл бұрын
Hello thanks for sharing! Is there also a "manual" way to delete constraints, besides the "Shake and brake". for example i do not manage to delete a coincident constraint of two circles without deleting one of the circles (not using Shake and brake). THX
@Bizlearn_Siemens_NX_Training
2 жыл бұрын
Hi Jonas, ich melde mich am Montag dazu telefonisch, falls es passt. Das geht schon auch ohne Schütteln. Viele Grüße, Simon
@hanikhalil8569
4 жыл бұрын
Hi sir I follow your instructions file - utilities - features toggles and make the new sketcher on but it does not work the difference from yours that I have restart for activation is yes yours is no how to solve that please help thanks
@Bizlearn_Siemens_NX_Training
4 жыл бұрын
No... I've installed properly without mods and it works as it should. Are u using a licensed product?
@pavloshysh1332
Жыл бұрын
now they call "early access features" instead of "feature toggles". Do they do it on purpose to make it harder after you update software??
@Bizlearn_Siemens_NX_Training
Жыл бұрын
In the latest 2306 release, it's a toggle and no restart required. But I wish it was accessible more directly (:
@pavloshysh1332
Жыл бұрын
@@Bizlearn_Siemens_NX_Training thank you for your work, your channel is a great help for me, and I'm sure for others
@Ambergphil
4 жыл бұрын
Servus Simon, tu mal bitte RMT auf das CSYS und im Menü Sketch starten und dann nimmt er automatisch die XY-Ebene, den Punkt vom CSYS als Usprungspunkt und die CSYS X Achse als Horizontale Richtung ;-) Diese Verbesserung kam mit NX12. Vielleicht mit dem neuen Sketcher ist es anders. Auf jeden Fall eine geile neue Skizzenfunktion!
@Bizlearn_Siemens_NX_Training
4 жыл бұрын
Hi Phil, ja das kenne ich. Nur arbeite ich nicht immer auf XY oder starte die Skizze aus dem Formfeature. Daher denke ich oft nicht dran. Hat sich in der neuen Version nicht geändert übrigens. Der Solver ist super. Ich habe mir die Demos von Paul Bevan angesehen und direkt ein paar Dirty Trick Videos dazu aufgezeichnet. Die gibt's dann nächste Woche (-;
@mossThrow
4 жыл бұрын
Wow this is sweet! I really want the newest version now
@Bizlearn_Siemens_NX_Training
4 жыл бұрын
Hi Matt, and it's even sweeter than you think. I have already prepared some further tutorials concerning huge sketches and complex modifications. Thx for the comment
@artyompavlov9599
3 жыл бұрын
Hello! How can I animation size of sketch or how can I disable update delay during sketch creation?
@banoniebatute9682
3 жыл бұрын
Hello, previously, i can sketch, offset plane in the assembly. With the new update every time i do these, the sketch, is done in the part where the face i select. Please help. Ty
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
Sorry for late response - it's a renewal in NX1926 which can be disabled. Did you find it already?
@banoniebatute9682
3 жыл бұрын
@@Bizlearn_Siemens_NX_Training Hello, Thank you for the reply. Unfortunately I have not found it. Please teach me. Best regards.
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
@@banoniebatute9682 the Setting is called "allow automatic work-part change" and can be disabled temporarily next to the selection filter at the top border bar, or via the Customer Defaults. For both opportunities you can use the search function (-:
@orkarmy
2 жыл бұрын
Oh gosh, i finally know how to sketch with new version! thanks a lot. ❤️ One question, do you know how to customize horizontal and vertical axis? yours are light grey dotted in the background. My axis are in strong Green and strong Red color in the front.
@Bizlearn_Siemens_NX_Training
2 жыл бұрын
Your color is predefined by the sys admin. You can edit it via the sketch settings, but only for each part. Not recommended. Contact your sys admin and make a proposal! Regards, Simon
@orkarmy
2 жыл бұрын
@@Bizlearn_Siemens_NX_Trainingmany thanks!! 🙏🙇
@MarkLawry
4 жыл бұрын
You might mention that the videos to learn sketch are built into the software. Just ask for Help or press F1.
@Bizlearn_Siemens_NX_Training
4 жыл бұрын
Hey Mark. Absolutely. And I did watch all of these videos. The implementation of training within the SW is the best way to share information. But nevertheless, I do not see an alternative for a real training there, because there is no story being told. It's function based and methods missing as well. If there was a story line throughout the overall updates, role based and personalized and concerning modern methods of designing beside group activities etc., I would have mentioned it. Maybe I'll discuss this issue through one of my videos or within my blog (-;
@pokednaful
3 жыл бұрын
Why your "restart to activate" is 'no'? But mine was 'yes'
@Bizlearn_Siemens_NX_Training
2 жыл бұрын
I think it is depending on the detailed version of NX
@oldpicklesdupree4515
3 жыл бұрын
Hello!I also got the nx 1926 but it's a student version but when i want to enable the new sketch solver i need to restart the app but when i do the sketch solver switches off.How can i fix that?
@orangeohaiyo2644
3 жыл бұрын
yeah, i have the same problemm
@PASHKULI
4 жыл бұрын
that "offset" extrude is quite an old feature in SolidWorks. Technically it is not a feature, but a convenient way of extruding at a distance from the sketch plane.
@Bizlearn_Siemens_NX_Training
4 жыл бұрын
Also the symmetry value enhancment is standard in Solid Edge since I can imagine. But as the new priority seems to be a "clean up" of the system, it's time to do such mods in 2020 😂
@PASHKULI
4 жыл бұрын
@@Bizlearn_Siemens_NX_Training I always thought Sold Edge needs more exposure online. It's got so many great features such as ST (also implemented in NX)
@thomashanrahan9250
3 жыл бұрын
Is it still possible to use Point on Curve from a previous sketch ?
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
Hi, of course it is. But the relation behaves slightly different due to the new solver. The Relations have been consolidated and Point on Curve is now produceable via the Coincident Relation.
@jeffkunkler3842
4 жыл бұрын
modeless dimensioning!
@Bizlearn_Siemens_NX_Training
4 жыл бұрын
Based on AI! There are so many potentials. Can't wait to see further developments in CAD (-;
@gilleschirignan1279
3 жыл бұрын
new sketcher is terrible
@Bizlearn_Siemens_NX_Training
2 жыл бұрын
Depends on the workflow. I have made good and bad experiences. And with the time gone by, my knowledge helped me to survive. Anyway, yesterday I have imported some DWG Curves into the new Sketcher. And that was terrible. 74 missing constraints, the old Sketcher would have created mostly. I am sure, things will be improved soon and the usability will become better. Did you have a training already?
@mohammedusama9854
3 жыл бұрын
Love your videos man but get to the point lol
@Bizlearn_Siemens_NX_Training
3 жыл бұрын
😂 I know what you mean and guess what... I have already cut my videos down to this size. Thanks for the comment
Пікірлер: 62