' Good afternoon, I am attempting to do a backup with the same USB/PPI Multi-Master Cable and a TP177B PN/DP-6 using Prosave software but not able to establish connection. I followed your stepts exactly but nothing. are there settings on my computer in the control panel under the SET PG/PC interface tab that I need to change and if so to what? Also, in the Control Panel submenu of the HMI, are there any settings I need to check or change under the S7- Transfer settings icon? Thank you.
@murtazaozkorkmaz6953
Жыл бұрын
Thanks for the great video. Can you help me how to reset my TP177 to factory settings. And what tools do I need for this?
@DS-pm9rl
3 ай бұрын
Hey! Same issue here. I've read any manual available and still can't figure it out!
@sudarsanaakila2437
17 күн бұрын
While I connected hmi TP1200 from panel to work table &s/w on 24vps, will not appear the full graphics, just on windows only how can get full screen graphics
@skunkape5918
2 жыл бұрын
Thank you Sir. Most helpful ❤
@TranTien7699
Жыл бұрын
Hi sir, what model cable mpi can backup for TP177A?
@gilberboy5739
Жыл бұрын
I want to view the graphic in my laptop where should I connect the cable and what software should I have
@sajibdas1956
Жыл бұрын
Can i use PC Adeptor Usb 6ES7 972-0CB0-0XA0 for get the project backup from TP177A?
@sahajahanhossain7376
Жыл бұрын
After making backup, can we make modification on the project, or this is just image file? Thank you. Which software need for edit?
@Mujahid_Chougule
Жыл бұрын
You can't edit or modified, uploaded Simatic HMI panel Backup.
@manishsingh2693
2 жыл бұрын
Sir i have simatic s7 pc adapter USB 6ES7 972-0CB20-0XA0. Is it correct for communication to hmi otherthan ppi cable. Also please let me know how can i download prosave software. Thanks
@prakasanlohithan7691
2 жыл бұрын
To begin with, Thank you very much, sir. I would like to know how I can reset the SIEMENS SIMATIC HMI TP177A administrator ID and password without losing the configuration and settings.
@micromaxengineering678
2 жыл бұрын
Thank you friend, Very help full for me. I have SIMATIC S7 TS ADAPTER, 6ES7 972-0CA34-0XA0. Can i use this with TP177A for backup or restore ? Thank you
@PLCNerd
2 жыл бұрын
I am afraid it cannot be backed up using this adapter.
@prasetyo7777
2 жыл бұрын
Hi sir, is it possible for backup using profinet(LAN) with software project?
@PLCNerd
2 жыл бұрын
No. Not possible in TP177A.
@wannaswannas1214
2 жыл бұрын
hello sir is it possible to take backup while the hmi is runing with the machine
@PLCNerd
2 жыл бұрын
No its not possible. The runtime of HMI will be aborted to take the backup.
@wannaswannas1214
2 жыл бұрын
@@PLCNerd HELLO AGAIN if I make some modification with wincc on the program of the HMI will this program continue to work the cpu or I have to go and integrate it again with the cpu ( I need to change the admi pasword of an HMI)
@chameerawijenayake8832
3 жыл бұрын
I have issue with communication with PLC and HMI with PC is it because of the OS?
@PLCNerd
3 жыл бұрын
Check Communication interface. Do proper settings for DIP switches on the back side of Touch panel. Check PG PC interface as well.
@chameerawijenayake8832
3 жыл бұрын
does this works only for windows XP os
@PLCNerd
3 жыл бұрын
Prosave can work for any windows OS. It has its own versions for both Win Xp and Win 10.
@hamzaayub4251
2 жыл бұрын
hi i want to edit this file. please guide me how to open in tia portal ??
@PLCNerd
2 жыл бұрын
Dear this is not editable in TIA portal.
@saberalhassani2956
3 жыл бұрын
hi sir. After making backup, can we make modification on the project or this is just image file? Thank you
Пікірлер: 27