Honestly, I think you're the best Rhino trainer on KZitem. By far.
@PJChenJewelryDesign
6 жыл бұрын
Thank you! That really makes my day!
@eghterafi
6 жыл бұрын
every time i watch a video you made, i learn a new tool :) Thank you
@PJChenJewelryDesign
6 жыл бұрын
You are welcome, Poya.
@josjaniessen7588
6 жыл бұрын
Thank you PJ. I can certainly use these commands with my signet ring with the coat of arms of Utrecht!
@PJChenJewelryDesign
6 жыл бұрын
that is great, Josja
@jemi011
6 жыл бұрын
Thank you PJ I was waiting for this .
@PJChenJewelryDesign
6 жыл бұрын
That is great. I hope the video helps.
@samiraitidir9080
6 жыл бұрын
Nice and straightforward technique PJ. Please keep up the good work!!!.
@PJChenJewelryDesign
6 жыл бұрын
Thank you!
@AmuntValencia90
4 ай бұрын
Great lesson once again) but I've got a question - how can I move seam line on the solid object? I made a singlet ring using Surface from network, then mirror and boolean difference, and I've got one continuous seam along the outside of the ring
@PJChenJewelryDesign
4 ай бұрын
you can only move seam on a single surface not polysurface
@mjy596
4 жыл бұрын
Great instruction. Thank you.
@PJChenJewelryDesign
4 жыл бұрын
You are welcome!
@karengmail4533
6 жыл бұрын
Always learn something new in a very enjoyable manner! Thanks!!!
@PJChenJewelryDesign
6 жыл бұрын
Thank you, Karen.
@lochuynh6694
4 жыл бұрын
Awesome PJ Chen !!!!
@PJChenJewelryDesign
4 жыл бұрын
Thank you!!
@fbmarco
6 жыл бұрын
Thanks PJ, I learn a lot form you.
@PJChenJewelryDesign
6 жыл бұрын
You are welcome. Love to share.
@johnward6687
6 жыл бұрын
Great tutorial again simple and concise
@PJChenJewelryDesign
6 жыл бұрын
Thank you, John!
@glnhl727
4 жыл бұрын
mr pj chen great master thanks..
@PJChenJewelryDesign
4 жыл бұрын
You are welcome
@aneesrabie965
6 жыл бұрын
Yes I do like it sooooo much...thank you Pj...
@PJChenJewelryDesign
6 жыл бұрын
You are welcome, Anees.
@bhargavchenji73
4 жыл бұрын
thank you PJ Chen
@PJChenJewelryDesign
4 жыл бұрын
You are welcome
@trungnguyendinh5748
2 жыл бұрын
So beautiful.
@PJChenJewelryDesign
2 жыл бұрын
Thank you! 😊
@johnsingh7962
6 жыл бұрын
Great tutorial Pj
@PJChenJewelryDesign
6 жыл бұрын
Thanks, John.
@iftikharamin21
6 жыл бұрын
Thanks sir,you make my day.Thanks a lot.
@PJChenJewelryDesign
6 жыл бұрын
You are very welcome!
@peter962592
4 жыл бұрын
Perfekt. Thank you.
@PJChenJewelryDesign
4 жыл бұрын
Welcome!
@emrahy.849
6 жыл бұрын
very nice..thanks again
@PJChenJewelryDesign
6 жыл бұрын
You are welcome!
@hatzinikolaoupalms7423
4 жыл бұрын
Hello PJ, at 1:25 how you projected the triangle without using the project command? I holded the shift as you said but it didn't project. (p.s. I use Rhino 5.0)
@PJChenJewelryDesign
4 жыл бұрын
It was trim not project
@alvi2308
6 жыл бұрын
hi pj, thanks for your videos! i ve a question: when i try to flow along surface i can select only half of the triangle (as also when i create the UV curve), resulting in a mess.. thank u again!
@PJChenJewelryDesign
6 жыл бұрын
sounds like you have the seam right in the middle of your triangle.
@alvi2308
6 жыл бұрын
true ! i already adjust it. thanks pj
@PJChenJewelryDesign
6 жыл бұрын
Happy it helps.
@pooriasalar1198
4 жыл бұрын
@@PJChenJewelryDesign Hi PJ. I have the same problem srf seam doesn't work on that also I split it and still have the problem. what should I do?🤦🤦♀️
@user-517
6 жыл бұрын
這影片讓我學習非常多!
@PJChenJewelryDesign
6 жыл бұрын
太好了
@alvi2308
6 жыл бұрын
sorry for bothering u again pj, but something is still wrong with flow along srf comand.. it seems like it flows all aroud the ring surface.. did u create the ring on the tutorial with the curve network? how did u put only one seam? thanks
@PJChenJewelryDesign
6 жыл бұрын
Hi Al, Can you send your model to my email at pj@pjchendesign.com, I will take a look for you.
@suvasismohanty445
6 жыл бұрын
Thank you very much
@PJChenJewelryDesign
6 жыл бұрын
You are very welcome. Feel free to let me know if you have Rhino questions.
@Phoungborasy
6 жыл бұрын
wow,, thanks you very sir,, at the next video can you please do in on Matrix??
@PJChenJewelryDesign
6 жыл бұрын
Hi Phoung, I wish I can. Even I taught Matrix before. I currently use RhinoGold. Both programs are the plug-in software for Rhino. They share a lot of the same commands. You can use the same way to build 3D models from my tutorials in Matrix or RhinoGold.
@rohangolchha5824
4 жыл бұрын
Hi pj , i used the rhniogold plugin to create the signet ring but then when i do flow along the surface, its not coming to its actual place rather the object is enlarging or its shifting downwards
@PJChenJewelryDesign
4 жыл бұрын
you need to creat uv curve first to define the boundary accurately.
@rohangolchha5824
4 жыл бұрын
i tried but i am not able to find out the mistake can you give some suggestion
@gilbertodeoliveira
6 жыл бұрын
Incrível!!
@PJChenJewelryDesign
6 жыл бұрын
obrigado!
@naishadhjoshi7006
6 жыл бұрын
Nice pj
@PJChenJewelryDesign
6 жыл бұрын
Thank you!
@OldDirtyBastardito
5 жыл бұрын
Hello, PJ. I'm also having the same problem with CreateUVCurve command, it selects only half of the surface and I don't know how to fix it.
@PJChenJewelryDesign
5 жыл бұрын
if you only get partial of surface. mean you have a "seam" there. UV curve only work on single surface not polysurface
@jonasgiangrosso5140
4 жыл бұрын
@@PJChenJewelryDesign Im having the same problem but when I select it normally there is no seam
@rameshguggilla892
4 жыл бұрын
wondrfull
@PJChenJewelryDesign
4 жыл бұрын
Thanks. Please share my video if you like them!
@byrandavies7055
5 жыл бұрын
I’m having a problem, after I extrude the design, I don’t have my original triangle curve all the way around the design as you do, I have all the gaps inbetween the design as trimmed out earlier. Therefore when I try to create a surface to flow along it is not possible. How did you keep your full triangle curve around the design?
@PJChenJewelryDesign
5 жыл бұрын
you may trim on the seam. use the other side that doesn't have seam may solve this issue
@byrandavies7055
5 жыл бұрын
PJ Chen Design thanks for the prompt response. sorry, what do you mean by trim on the other side that doesn’t have a seam? Is it alright if I email you some screen shots to show you?
@PJChenJewelryDesign
5 жыл бұрын
@@byrandavies7055 got you email but cannot tell the issue. please email 3dm file. I will take a look for you later
@SJ-wi7xm
2 жыл бұрын
At 2.23 while selecting triangle in my project its only slecting half triangle and i am not understanding why this is happening
@PJChenJewelryDesign
2 жыл бұрын
I guess there is a seam in the middle of your surface. use the triangle on the other side of ring
@SJ-wi7xm
2 жыл бұрын
@@PJChenJewelryDesign i tried on both sides not working and also explode surface again joined it still not working
@animeshjha2442
4 жыл бұрын
Hii mam, I'm having problem in making uv curve as it is selecting only half triangle... And when when I check for surface seam it is not selecting the surface. Please help
@PJChenJewelryDesign
4 жыл бұрын
You may have multiple seams which mean it is a polysurface. UV curve only apply to single surface. Try the other side of ring.
@animeshjha2442
4 жыл бұрын
@@PJChenJewelryDesign mam i tried but on both sides it is selecting only half of the surface
@animeshjha2442
4 жыл бұрын
@@PJChenJewelryDesign is there a way to convert polysurface to continous surface
@animeshjha2442
4 жыл бұрын
I followed each and every step to make basic signet ring from your other video
Пікірлер: 81