Follow along as i turn this tired old 1991 Chevy Silverado into a cool street truck with the Ebay 5/7 Lowering Kit and a set of 20" US MAGS wheels www.ebay.com/itm/261958024836...
Amazing video, got a bonus on shooks, brakes, ball joints along with everything else. Thank you!
@ragtopcat70
Жыл бұрын
GM knocked it out of the park with the OBS trucks... I got a 1998 and let me tell you every time i see another one lowered or cruising. makes me happy to see it. Your truck came out fantastic!!
@1194video
Жыл бұрын
These trucks are very popular now, it’s nice to see one that’s not overdone but just subtle changes to give it that cool look
@03vrob28
3 жыл бұрын
Great video man! Super straight forward and to the point. Thanks for the step by step explanation. Truck looks great. Subscribed! 😎
@cjnetro8647
5 ай бұрын
Your work is amazing bro
@hmmm.7778
Жыл бұрын
Exactly what i was looking for! Your video makes it look super easy and boosted my confidence to getter done! Great editing. Any engine R/R videos coming (on the same year truck, for those of us with rod knocks)? If you do one, the same way you did this one, it's SURE to be a hit! Thank you & Keep on Truckin'!
@1194video
Жыл бұрын
Iv got one I fully restored on here with 5.3 swap
@thashoeboy
8 ай бұрын
Love it!
@TimeVault1
2 жыл бұрын
We do need to see some more destruction from Tennessee Toy Tester though !!!!
@eduardomolinero8096
Ай бұрын
I have been looking for what hangers & shocks to use for a 5/7 drop any recommendations?
@metalmanworks
Жыл бұрын
I have a 2001 f350 super duty in going to do this to. I can't find any done. Thank you for the video. I'm going to still haul and tow. Basically I'll weld and reinforce everything. Should be good ?
@1194video
11 ай бұрын
I’d bolt it then weld it so it’s strong bit if it’s a gooseneck it won’t put as much strain on the rear of the frame
@metalmanworks
11 ай бұрын
@@1194video thank you 😊
@Constructridez
11 ай бұрын
Nice
@rosshoffman8473
Жыл бұрын
what kit did you go with to not have to cut the front spindle like on a Belltec?
@1194video
Жыл бұрын
Check out my comparison video all info is there kzitem.info/news/bejne/knyfrWefpn12p6w
@ministeriodeliberacion7793
2 жыл бұрын
Good video new sub :)
@1194video
2 жыл бұрын
Thank you!
@coltercummings9172
Жыл бұрын
Great video. What is the offset of your wheels great Fitment
@1194video
Жыл бұрын
Honestly I can’t even remember the offset, I know that they were a kit wheel and tire package specifically for 78-98 gmc and Silverado 5 lug
@ant-hu1gs
25 күн бұрын
Great video, and very detailed. Why did you put the bolt on the last hole on the shackle of your doing a 5/7 drop, would this make it a 5/8?
@1194video
25 күн бұрын
I changed it later, just wanted to go as low as it offered first to see where it sat
@user-wm2xc5eg4p
Жыл бұрын
I like your videos can you please send me the link where you bought the lowering kits front and back please and thank you
@1194video
Жыл бұрын
Which one? The eBay kit has to have info on rotor size either 1” or 1.25 v6 or v8 doesn’t matter but I thought I added the link in the description
is the kit still holding up well? what tire size are you running?
@1194video
4 ай бұрын
Still going strong in the guy that has it now. And it was staggered but I do t remember the tire size
@ant-hu1gs
25 күн бұрын
Great job at making this video I have followed it step by step. I do have a question, you put the shackle bolt on the first hole , after explaining this would result in a 5/8 drop, but I thought you had a 5/7 drop. And by any chance do you have the part number for the shackle you used ? Thank you!
@1194video
22 күн бұрын
I do t have any info anymore it’s been so long on this one, I just went to eBay and looked the kit up and found it though
@timgibson2070
2 ай бұрын
Great work and looks good but it too low in my opinion. I bet the Trans cross memeber and the gas tank are 1"s from the ground. You should do air ride suspension if you want to go this low... even if its just on the front. Drop it down when you park and or driving on even pavement and raise it up when you need to get over speed bumps, and or pull it into uneven driveways, etc.
@1194video
2 ай бұрын
It is too low, needs to be about 1@ higher front and rear, the frame is actually 6” from ground but the wheels run when you hit a bump so it does need raised
@ant-hu1gs
21 күн бұрын
I was able to find it. Thank you
@citoloft1969
Жыл бұрын
How are you doing? Did you have to roll the fenders?
@1194video
Жыл бұрын
Good thanks for asking! I did have to roll my lip, I put a piece of pipe in between the tire and fender and as I drove it back I had a buddy hold the pipe in place back and fourth til it was rolled nicely
@rodm2345
27 күн бұрын
I was reading some of the comments and someone asked if you had to roll your fender and you said yes and when watching another one of your videos about the wheels you mentioned you could do a 20×9.5 or 20×10 and be fine. So my question and I'm sure the answer is yes but still want to ask does the drop play a big part in making that decision? I'm looking to get 20×9.5 front and 20×10 rear weld wheels but they dont have a 10 it jumps straight to a 10.5 unless I go 19s they do have a 10 in 19s but if I'm gonna spend the money I want to spend it on something I want. I really want to avoid rolling the lip it's not a big deal but if I can avoid making alterations it would be nice. The truck was already lowered when I purchased it it's like a 3/5 drop
@1194video
26 күн бұрын
These were 20x11 and the offset made the wheels stick out a bit and it was lowered on the ground so had no room to bounce so had to roll them
@carlosgonzalez-kh8gm
8 ай бұрын
Want to to do that but what about tue leaf springs
@1194video
8 ай бұрын
Still need to do c notch even with leaf drop
@stryver_699
Жыл бұрын
would this fit on an extended cad?
@1194video
Жыл бұрын
Yes it’s all same truck
@4pf.jay_
3 ай бұрын
Did you weld notch to frame?
@1194video
3 ай бұрын
On this one I only bolted but on the frame off build I welded sold and bolted
@BryanLsx.
11 ай бұрын
What size of tires in front and rear
@1194video
11 ай бұрын
I can’t remember the size, it’s been awhile since I had that truck, they sidewalk was 30 front though and 40 rear but I can’t remember width
@ralfievaldes343
10 ай бұрын
16
@urielbusani865
3 жыл бұрын
Can you send me a link for my 94 1500 single cab ?
@1194video
3 жыл бұрын
Just go to eBay and look up the 5/7 kit and they have lots to choose from but measure your front rotor width before ordering, mine were 1” wide
@urielbusani865
2 жыл бұрын
cool i believe i found my kit but i noticed it doesnt come with any u bolts for that rear end and u didnt use any new ones either correct? so its safe to say i can use the ones that are already on the truck?
@1194video
2 жыл бұрын
@@urielbusani865 The stock are made in the USA and aftermarket probably china so i prefer using oem myself but it depends on personal likes.
@davidadavila
4 ай бұрын
what is the specs on the wheels? what is the backspacing
@1194video
4 ай бұрын
I do not have that info any longer, wish I did but unfortunately can’t remember
@bigsexymuthashutyomouth2546
2 ай бұрын
20x10.5 on back and 20x9.5 on front. I am watching the entire Playlist now, and I've just watched the video of the wheel specs. The wheels are the US Mag U120 wheels.
@JavierAguilar-mh5se
9 ай бұрын
What you rate spindle source am looking to buy my setup
@1194video
9 ай бұрын
The ones I used in this truck I like but it does set the wheels about .5 out further than bell tech
@luisgomez7393
7 ай бұрын
@@1194video what gave you the 5” drop? was the spring 3” and the spindle 2” or other way around? thanks 🙏🏽
@1194video
7 ай бұрын
@@luisgomez7393 3” drop spindles and 2” springs
@Nando_obs
11 ай бұрын
Ik this is a old video but do you have a video on how to set up the flip kit thanks
@1194video
11 ай бұрын
Yes I’ll send it to you
@1194video
11 ай бұрын
kzitem.info/news/bejne/pH6av4t7j3djZmU
@rodneymorris1609
Жыл бұрын
Did you have to modify the fender lips at all? Any rubbing?
@1194video
Жыл бұрын
The rear had to have the lip cut and rolled
@matthewdawson568
6 ай бұрын
Sick looking truck man, did have to notch the bed support an notch for the pumpkin
@1194video
6 ай бұрын
I did, notch over center chunk and above the c notch
@user-xm3px5vh4h
Жыл бұрын
What rear shocks did u put in it after the drop?
@1194video
Жыл бұрын
The kit came with shocks
@josezamaniego13
2 жыл бұрын
What size of wheels and tires are you using ?
@1194video
2 жыл бұрын
20x 9.5 front and 20x 10.5 rear tires are 255/40/20 and rear are 305/45/20
@bruhbedrivin
4 ай бұрын
Did you have to cut out that piece that goes across underneath the bed so the diff doesn't hit?
@1194video
4 ай бұрын
I did have to cut a section out but left .5” of it to keep strength
@bruhbedrivin
4 ай бұрын
@@1194video oh ok.
@bruhbedrivin
2 ай бұрын
@1194video you didn't have to take the bed off right?
@1194video
2 ай бұрын
@@bruhbedrivin I didn’t have to
@jrpumper
Жыл бұрын
whats the specs on your wheels
@1194video
Жыл бұрын
It’s been so long I can’t remember, they were ordered to fit 88-98 though
@blickstick7884
Жыл бұрын
Probably 20’s I’d assume 22’s at the most idk about the tires
@1194video
Жыл бұрын
@@blickstick7884 they are 20s front and rear and 11 rear and 9.5 front but I don’t remember the back spacing
@timgibson2070
2 ай бұрын
If you numbnuts would watch the video you mite know. Lol
@mike99chevysuvmob67
7 ай бұрын
Sick what wheels are those and size
@1194video
7 ай бұрын
kzitem.info/news/bejne/1n6tmqiJcJqfZZgsi=jQyXQ-xZrSvErJcM I talk wheels in this video
@timgibson2070
2 ай бұрын
Watch the video! Lol
@NGUFlips
Жыл бұрын
damn can you do my kit ?
@1194video
Жыл бұрын
Just finished another for a guy on his 96
@NGUFlips
Жыл бұрын
and how much was it
@NGUFlips
Жыл бұрын
judging by your accent i doubt you’re anywhere near new york lol
@1194video
Жыл бұрын
@@NGUFlips was over the weekend, went up to get parts for a mustang, I’m in Tennessee. And I charged the guy 1k to do kit but I welded and bolted his C notch so he could still use his truck to tow
@NGUFlips
Жыл бұрын
@@1194video nice
@danielmitchell6450
Жыл бұрын
What size wheels or they
@1194video
Жыл бұрын
They are 20” front and rear, rears are 10.5 and front are 9.5
@Sneakerheadashton
5 ай бұрын
What’s your wheel offset and tire size
@1194video
5 ай бұрын
20x11 and 20x9.5 but I do not remember the back spacing
@seanmee7646
Ай бұрын
Are you running staggered wheels on this (8.5 front and 10 rear)?
Пікірлер: 104