I've had problems adding dforce to conforming clothing. Will it work if I just import the original obj of the clothing instead.
@Shinteo5
3 жыл бұрын
I am not sure, actually. So far, I don't really have any issues with dforce, assuming I did the proper prep work.
@lauraandersson
2 жыл бұрын
Where did you say you got the dress? Looks nice. Aa for the turorial , thanks a lot. A question, does this require specific GPU or can I work it with my piece of junk of a computer?
@Shinteo5
2 жыл бұрын
I have no idea. I started with a decent rig, so I don't know how lower end PC will fare. Best way is to try it out, I think.
@sleepinggorilla
2 жыл бұрын
The dress is probably from a Patreon provider named Shinteo. They do a lot of high quality imports. DAZ is built for NVIDIA GPU, so you should at least have that. After playing around with my laptop for a few months a built a new Desktop to use with DAZ. More RAN and better GPU make a huge difference.
@Saturn-tw6wf
Жыл бұрын
@@sleepinggorilla This is Shinteo's channel.
@zcnaipowered7407
7 ай бұрын
Dforce is not junk pc friendly
@davidmouser596
3 жыл бұрын
What do you do if the dForce Modifier Weight Node does not appear in the Node Weight Map Brush drop down? Its created and selected in the scene tab but does not exist in the tool settings/Node Weight Map Brush?
@Shinteo5
3 жыл бұрын
Check if you have the node selected in the scene
@EinzigsteEinzelganger
5 ай бұрын
This is amazing! Thanks! But, I don't know why, my geometry selection tool started to deselect everything when I click again (for instance, I select some polygons, turn to the camera to select other part and, when I click again, it unslects what was previously selected). What did I do wrong?
@EinzigsteEinzelganger
5 ай бұрын
Solved. I had to press control.
@Shinteo5
5 ай бұрын
@@EinzigsteEinzelganger Yes, otherwise they take it as a new selection.
@MhLiMz
Жыл бұрын
This is a good tutorial, but what me interest most is the preperation that you mention at 3:20 that "this model is pretty much set up for dForce already". Well, what is the necessary set-up with clothing for using it in dForce?
@Shinteo5
Жыл бұрын
Basically, it's a mesh that is completely connected, without any loose or hanging disconnected mesh, that is also not clipping onto itself. Example would be the skirt in the video. Negative example would be if you have something like buttons or decorations that are disconnected from the main mesh. You can check this by selecting one polygon and using the linked mesh selection tool. If there are anything that is not selected, then it is a loose mesh and would fall off when you set up the deforce and run the simulation.
@Rodrigo-Bruno
3 ай бұрын
Can I use Transfer Utility to transfer G9 body morphs to G8?
@Shinteo5
3 ай бұрын
No. The mesh for G9 and G8 are different, and all the morphs are not compatible. You'd need to create new morphs for them.
@JuanFeju
2 жыл бұрын
Mine keeps on exploding. Is there certain way to avoid it? I've tried many things suggested on Daz3d forum, but none is working. Everytime I simulate my custom cloth. KAbooW!
@Shinteo5
2 жыл бұрын
There is this addon call Dforce Master that has a setting call 'anti explosion'. It works quite well.
@kisukeow
3 жыл бұрын
The outfit explodes every time I try this. Do you know the solution?
@Shinteo5
3 жыл бұрын
There is an add-on, that has anti-explosive setting. It should be shown in the video
@kishore.rawat44
3 жыл бұрын
Thankyou but how will i save this cloth?
@Shinteo5
3 жыл бұрын
Save as/ Support Asset/ Figure prop assets
@arendisniek
Жыл бұрын
CTR ant + doesn't do anything for me in Daz 4.21
@Shinteo5
Жыл бұрын
try just + then.
@arendisniek
Жыл бұрын
@@Shinteo5 thanks for your reply, will try again tomorrow, unfortunately no more time now. I'll let you know if it worked
@arendisniek
Жыл бұрын
no, even then it won't work
@arendisniek
Жыл бұрын
success. setting tool settings was not correct. but my dress keeps exploding
@Shinteo5
Жыл бұрын
@@arendisniek Use the anti explode setting in www.daz3d.com/dforce-master-cloth-simulation-presets
@a_dym
3 жыл бұрын
where can I get that anime preset
@Shinteo5
3 жыл бұрын
What anime preset?
@a_dym
3 жыл бұрын
@@Shinteo5 that " G8 anime preset.duf"
@Shinteo5
3 жыл бұрын
@@a_dym That is just G8F with the Sakura 8 Head dialed in and exported.
@a_dym
3 жыл бұрын
@@Shinteo5 oh i see haha😁 thanks
@amandalynnart
4 жыл бұрын
There is some very high pitch tone like a mosquito buzz happening in the audio, which is very painful. Other than that, thank you for helping me with the Dforce settings.
@Shinteo5
4 жыл бұрын
Yeah, sorry. My mic is a pretty crappy cheap one.
@irondog213
10 ай бұрын
@3:45
@CaritasGothKaraoke
Жыл бұрын
*edit your videos*
@CaritasGothKaraoke
Жыл бұрын
“when you have too many seconds it takes forever” It doesn’t have to in KZitem
@DavidRhodes-lr3tt
Жыл бұрын
I get annoyed by the fact that almost all who create tutorials seem to have little regard for the audience they purport to help. I don't know what inspires anyone to make tutorials but have to assume the somehow, through subscriptions they receive a small amount of money and good luck to them, they deserve some reward for their time and knowledge. However! I think in this tutorial around 30% of the time is spent waiting while the author sets up stuff which could have been done prior to the recording. Dimwits like me are anxious to learn but we spend huge amounts of time waiting for gems of wisdom like this, and much of the time is spent waiting or trying to decipher what tools the author is using and how to locate them. It turns a 10 minutes video into a long and frustrating experience....
@Shinteo5
Жыл бұрын
Sorry for not living up to your lofty expectations of a tutorial. As you can see from my other videos, I usually do them live and upload directly. I don't know how to edit and make them all pretty. This youtube channel is more or less a place for me to answer people's questions as to how I do certain things in a visual way, or those who want to see my workflow, nothing more.
@kimdam7380
3 жыл бұрын
I am venting here. There are 10,000 tutorials on things we already know but no videos on the important setting in the surface tab.
@Shinteo5
3 жыл бұрын
To be honest, Dforce is still mostly a mystery to me as well. Just that, there are people who are asking me how to even set it up. Hence this simple tutorial. As for the detailed settings, I have no idea myself, so I can't teach what I don't know. Sorry.
Пікірлер: 59