Hello all! In this video you will learn how you can make a fighter jet very easily. Here are the links to the MODS: FINE TUNER www.simpleplan.... OVERLOAD www.simpleplan....
Tip: If your jet is super fast or has enormous wings then use structural and then use XML or Overload to set allowControlSurfaces to true, because if not then you'll have wing flex which will ruin good builds and create unnecessary trouble.
@blasthail5768
Жыл бұрын
Thanks for the tip, ill make sure to use it next time!
@noobrulez3081
2 ай бұрын
THANK YOU SO MUCH MY BOMBER REALLY NEEEDS THIS
@fedo18
Жыл бұрын
you can press the space bar to see CoM (center of mass) CoL (center of lift) and CoT (center of thrust). using these you can balance the plane much easier and faster
@terrora69
8 ай бұрын
I make-a the jet
@putusancaya9985
Жыл бұрын
You basically gave Mikoyan Gurevich an updated Mig 21 design.Except for the weapons and landing gear
@blasthail5768
Жыл бұрын
I swear to god i just got to know what even a mig was when i watched TOP GUN 2 days ago, so know i can see what u meant
@kevinduliesco5468
3 жыл бұрын
Hey:)
@jtan128
3 ай бұрын
why does the jet have a literal humongous TANK CANNON on it?!?
@blasthail5768
3 ай бұрын
Cuzzzzz, size matters
@jtan128
2 ай бұрын
@@blasthail5768yes
@jtan128
2 ай бұрын
@@blasthail5768try making it more aerodynamic
@person___9
2 жыл бұрын
i cant stress enough how underrated you are your content is amazing and you barely have any subscribers unfortunately
@blasthail5768
2 жыл бұрын
Maybe one day!
@jtan128
3 ай бұрын
mine has forward-facing wings, two vertical stablizers and 16 mini guns that are fixed and cannot turn
@jtan128
3 ай бұрын
oh and all the mini guns are on the front
@jtan128
3 ай бұрын
and it has 2 engines
@blasthail5768
3 ай бұрын
And u were question me for adding a tank gun on a plane, u created a Frankenstein of a plane
@jtan128
3 ай бұрын
@@blasthail5768 yes and it is gray and your plane is good but funny
@QuandaleDingle-dg1tr
2 жыл бұрын
the "antenna" in most cases is a tool that calculates mach speed from what i know
@blasthail5768
2 жыл бұрын
Yess you are right, it calculates the pressure that being created in it from the compressing air and gives the speed reading !
@tund7035
Жыл бұрын
It actually moves forward and back to regulate how much air is getting in. I believe you are referring to pitot tubes. Those are smaller than the "antenna".
@17_pierrematarru92
2 жыл бұрын
Can I make an jet without the inlet placed on the front?
@blasthail5768
2 жыл бұрын
Yes sure, the inlet just needs to be exposed to open air, it can be anywhere you wish, I put this in front for looks :)
@Lme31
2 жыл бұрын
I must say it the nose beside the guns remble a jet know as the mig 21
@jtan128
2 ай бұрын
try more grey
@jtan128
2 ай бұрын
colours
@alecboi777
Жыл бұрын
making it for vr
@rip_edwim
5 ай бұрын
hidden tallent! keep it hidden :)
@ulhoolho9188
7 ай бұрын
thank you so much:)
@blasthail5768
7 ай бұрын
You're welcome!
@איתילוי-פ1ט
2 жыл бұрын
Can you help me-? My jet can take off for some reason
@blasthail5768
2 жыл бұрын
yah sure send a vid of ur plane in my mail id blasthailyt@gmail.com
@Captainarkan
2 жыл бұрын
why are you using fine tuner mod instead of "original fine tuner on arrow button"
@blasthail5768
2 жыл бұрын
I used to use it before the tuner got added in the game itself, so it was more easy for me to use the tuner mod, but both are equally efficient!
@Veneto_Mapping
10 ай бұрын
This does not work bruh
@blasthail5768
10 ай бұрын
Where are u getting stuck? I’ll try to help
@Veneto_Mapping
10 ай бұрын
Nvm i made It. Unbelievable that you are One of the minority of YT Channels that respond to comments After 2 Years♥️
@Anton_Kankkunen
2 жыл бұрын
I like the tutorial but i dont want my plane to look like that cuz i dont want a delta wing one. And dont want the mig style front of the plane. So if it looks different would it still work?
@nutzlo9766
2 жыл бұрын
Yes, as long as the CoM, CoL, CoT are in this order as I mentioned. Make your jet design whatever you want, as long as the CoM, CoL, CoT MUST be on the same X axis and similar position to the Y axis. ( Note. CoM MUST BE ALWAYS INFRONT OF CoL, never behind, or else the craft will do flips, add nose weights to prevent this from happening.) You can see the CoM, CoL, CoT by pressing the button to save your craft, its the button icon with 3 balls on top of a triangle
@blasthail5768
2 жыл бұрын
You are right!
@Anton_Kankkunen
2 жыл бұрын
@@nutzlo9766 dont worry i know
@thegman431
Жыл бұрын
this looks a lot like a early mig, like a mig 15 or 17, but this tutorial was great!
@bullymaguire1835
2 жыл бұрын
The most noobish jet I have ever seen in my simple planes experience
@blasthail5768
2 жыл бұрын
I understand, but this is a tutorial, it cant get complicated when your learning something new right?
@bullymaguire1835
2 жыл бұрын
@@blasthail5768 ಠ_ಠ
@blasthail5768
2 жыл бұрын
@@bullymaguire1835 :)
@Anton_Kankkunen
2 жыл бұрын
You dont even know what my planes look like if this is noobish XD
Пікірлер: 49