When Jeff Bartels uses c3d. It looks so easy and simple. I struggle using Bolivia's road standards (ABC). Despite was made on AASHTO basis. We still dont have a coherent c3d template Nor a country kit. But your job is inspiring of what is the meaning of truly design
@marc07112
5 жыл бұрын
hi Jeff, can you do some videos on roundabouts? or do you have any recommendations for videos to watch about roundabout corridors? thanks
@j.alexander7554
4 жыл бұрын
I guess you can create an alignment thay goes in a circle, then follow the steps in this video for the connection with the other roads
@ntuthuko3175
4 жыл бұрын
@@j.alexander7554 The vertical profile of that alignment is a little tricky. It has to obviously end at the same elevation as the start of the roundabout. I would also appreciate a video on this topic. I second the request.
@pit7187
4 жыл бұрын
@@j.alexander7554 Thats Correct. is the same this video. but add circle like a the round.
@AbdelkhalekCharafi
3 жыл бұрын
I third request a video about Rbts👍
@ntuthuko3175
4 жыл бұрын
Jeff, firstly, thank you so much for all your videos. I've learned pretty much all I know about corridors from you. Two questions. 1. Why don't you ever model your roads using assemblies with full layerworks (approx 5 layers) that step out on either edge (width extensions), as per construction? 2. I often run into problems with my surface if I start/end my curb-return regions from beginning of curve to end of curve. As a result I extend the start/end of the region to beyond the start/end of curve. Have you ever experienced such a problem? How did you overcome it since you always stick to the start/end of curves?
@vas.milivoj
Жыл бұрын
you are continuously making so many people happy :) cant express how thankfull I am :)
@zagvot
5 жыл бұрын
Another great video sir... keep sharing thank you can you make a video about troubleshooting intersection why some of design profile keep vanishing when it is in intersection command... it will help a lot of Civil3D users...
@kkkk4493
6 ай бұрын
Thanks for your sharing. Sometimes, curb return alignment from line to arc is not in tangent, there will be a void after forms a corridor. Do you have and idea to solve this issue? Thanks.
@KlymatixTV
6 ай бұрын
this video saved my ASS!!!! liked and subscribed...
@fcamargo84
2 жыл бұрын
Jeff excellent video!!! you need to make more video about corridors. 🙏🏾
@SurveyEngineering
4 жыл бұрын
You are a Gem
@Fonkemman
3 жыл бұрын
Didn't know you can add an assembly insertion on the corners. I used to do this by splitting the region on that spot 😅
@fcamargo84
5 жыл бұрын
Fantastic Jeff!!! Thank you very much!! I’m struggle to built a corridor in C3D. Your videos help me a lot. 🙏🏾
@Breezebud
5 жыл бұрын
Se quiser eu posso te dar uma força com o Civil, Fabricio. Mexo com ele já faz uns 2 anos e meio, e nesse tempo deu para compreender bastante coisa sobre os Corridors do C3D
@fcamargo84
5 жыл бұрын
@@Breezebud Me manda um e-mail Arthur. fabricio_camargo84@hotmail.com Grato
@fcamargo84
4 жыл бұрын
@@Breezebud Arthur Qual é o seu e-mail? Estou com problema para modelar meu corredor nas intersecções. Obrigado
@Loki-qu2kw
10 ай бұрын
Dear Sir If there is any way, we could composed our own label and styles for alignment and contours and point styles PERMANENTLY for future use?
@bobdemilio6995
3 жыл бұрын
What if you don't have the option to set vertical targets? I have profiles for everything and can set Horizonte targets. Thanks
@Thomas_Civil_QC
Ай бұрын
Never seen anyone with that level of expertise in CAD. I never thought that such a task could be reduce to this amount of clicks yet this precise. Thank you for sharing your knowledge.
@autodeskcivil3dzamanali258
4 жыл бұрын
great video sir... keep sharing thank you can you make a video about in intersection iland .
@mangeshchavan748
Жыл бұрын
Hii Jeff, width and offset parameters are not showing while assigning assembly to curb returns please can you tell how to do it.
@jarexmat6228
5 жыл бұрын
*Is the vertical road alignment profile dynamically link to the ETW elevation of the horizontal road alignment?*
@arminius301
2 жыл бұрын
great learning content. But why choose an alignment that runs from right to left? That threw me off a bit visually and may cause confusion with other viewers in terms of what is right ETW and left ETW. Not a big deal though, thanks for posting this!
@alfredgutierrez7839
2 жыл бұрын
Good afternoon Jeff. Can you please send me the link to the videos for Creating offset alignment & profile and curb return alignments & profiles
@letrunghoang2132
4 жыл бұрын
Dear Sir, I have a issue about creating corridor of intersection with traffic islands. Could you make a video to help me and maybe many people? I have tried my best but i only create surface not corridor.
@magdimanal
11 ай бұрын
Thank you so much for all your very valuable videos Do you have a video for designing a valley gutter as part of intersection design?
@kaisj7
Жыл бұрын
Nice tuto THANK YOU like you do useully You are the best
@hamidhaidary3613
2 жыл бұрын
Thank you, How can we split a corridor in skewed position ?
@mujahidawan8402
2 жыл бұрын
Hy sir how we can super elevation settings to our profile and corridor for grading
@mre9159
4 жыл бұрын
HOW TO MAKE A DAYLIGHT WITHOUT FOLLOWING THE SLOPE OF A DESIGN ROAD?
@mersalalshadadi4000
4 жыл бұрын
Dear jeff , I have a problem that I hope will help us, when extracting the data of the corridor we get a report without the last station in the corridor , how is it possible to extract a report containing the last station
@edilshimeles8491
3 жыл бұрын
Jeff thank you all about your videos i've got alot
@diaamaamoun4621
9 ай бұрын
👌🏻🙏🏻
@jacobnunez7138
Жыл бұрын
what Type of lane do you use for the assembly?
@civilclub-kareemahmed838
4 жыл бұрын
Creative 😍
@gilbertoflores6324
3 жыл бұрын
Excellent and very productive video. Simple.
@odenchannel2510
Жыл бұрын
Many thanks Jeff. You are the answer to my question how to do intersections.
@rasitaragun2768
2 жыл бұрын
Finally this video has saved me!
@dent5423
2 жыл бұрын
Thank you!! I have split my corridor up and added in HB2 and BN kerbs (UK)
@JeffBartelsCAD
2 жыл бұрын
Glad to hear! Thank you
@benvanderberg5321
6 ай бұрын
Jeff you are the 🐐 (goat)
@mstabrez7155
2 жыл бұрын
#ahlesunnatahleimaan
@hacker23343
8 ай бұрын
thank you so much
@HISHAMFAWZY
5 жыл бұрын
Great as usual. Thanks
@JeffBartelsCAD
5 жыл бұрын
Thanks!
@Lo-fiSongMaster-c2o
Жыл бұрын
THANK YOU A LOT!!!
@saeids.6364
4 жыл бұрын
hi Jeff, I wish you could put your new videos on some playlists,so we could relate and use them more efficiently.
@ntuthuko3175
4 жыл бұрын
Are you referring to Summit Street, and do you mean instead of running assemblies along the curb returns?
@juand1932
9 ай бұрын
master of masters
@jeroenjansen2709
5 ай бұрын
Very clear!
@mikeblack4876
5 жыл бұрын
Great video Jeff! Looking forward to trying this. Never did like working in that dialogue box!
@JeffBartelsCAD
5 жыл бұрын
Thanks Mike!
@pit7187
4 жыл бұрын
Master absolutlly Nice. Jeff the best master
@JeffBartelsCAD
4 жыл бұрын
You are too kind! Thank you Pablo!
@mariokajin
5 жыл бұрын
One actually two questions . When you define a subassembly is there an option to define the slope of the pavement that is dependent on the direction of the curvature (corner) of the road(if the road curves to the right the road is inclined to the right) with only one subassembly? Or do you have to create a different subassembly?
@ArchieDodge
5 жыл бұрын
If you assign superelevation information to your alignment, you can choose subassemblies that support superelevation to do what you're asking for.
@mariokajin
5 жыл бұрын
Archie Dodge okay thank you I will try it out.
@asimkhattak2769
5 жыл бұрын
Great, very helpful vedio
@JeffBartelsCAD
5 жыл бұрын
Thank you, I appreciate it!
@Chubbbs117
5 жыл бұрын
Great video, Thank you.
@JeffBartelsCAD
5 жыл бұрын
You are welcome! Thanks for your support!
@ArchieDodge
5 жыл бұрын
I swear by these tools. Soo good! Great presentation.
@JeffBartelsCAD
5 жыл бұрын
Thanks Archie!
@echawia
5 жыл бұрын
Great tutorial thank you so much
@JeffBartelsCAD
5 жыл бұрын
You are most welcome!
@seyedfarhadsafavian265
5 жыл бұрын
Thank you Jeff,you rock! just wondering if the curb return lane should target the EOP and the CL, or both intersecting CLs in such case?
@ArchieDodge
5 жыл бұрын
In this case the EOP and CL because the main road crown is maintained. If both crowns were maintained you'd target the CLs but remove not just the curb and daylight from the main road intersection assembly but also the lane.
@seyedfarhadsafavian265
5 жыл бұрын
@@ArchieDodge thank you!
@JeffBartelsCAD
5 жыл бұрын
Thank you Archie!
@ArchieDodge
5 жыл бұрын
@@JeffBartelsCAD My pleasure. Hope you don't mind.
@alexisorozcor-asesoresbim4826
5 жыл бұрын
Superb as usual, mr Bartels. Thanks a lot!
@JeffBartelsCAD
5 жыл бұрын
Thank you for your support!
@poda97
5 жыл бұрын
I love your videos jeff ♥️
@JeffBartelsCAD
5 жыл бұрын
Thank you!
@deyvidzarate2187
4 жыл бұрын
Excelente video Jeff !!👌👌
@JeffBartelsCAD
4 жыл бұрын
Thanks David!
@mohamadalmostafa6474
5 жыл бұрын
Great.. Thanks a lot
@JeffBartelsCAD
5 жыл бұрын
You are welcome!
@LhounJaaf
5 жыл бұрын
thanx alot
@JeffBartelsCAD
5 жыл бұрын
You are welcome!
@hittman1412
5 жыл бұрын
why wouldn't you just use the same assembly through the intersection but remove everything beyond the lip of gutter in the assembly? is this possible? Thanks for the video!
Пікірлер: 85