best video regarding wood and metal filament + post processing, this vid needs more views!!!
@0calvin
4 жыл бұрын
Hey, thank you so much. It took a lot of work to make, so I am glad you appreciate it.
@nindtendo
4 жыл бұрын
am getting started in printig wood and copper and none of the videos I found so far covered it all :)
@almarma
Жыл бұрын
OMG! I was just considering making a small chest for the remote controls with wooden filament but the high cost it would have had me in doubt. Your trick about using cheap one on the inside is a great trick! Great job and thank you!
@jessehavok4181
8 ай бұрын
What slicer settings allow this?
@josephvanas6352
2 жыл бұрын
That finishing technique for the wood PLA turned out great. I also use that stainless steel pin media for wet tumbling brass cases for reloading ammunition. Even the most corroded and carbon fouled up cases come out looking brand new and shiny. The trick at least with reloading ammo is a generous squirt of dawn dish soap and about a teaspoon of lemishine which is a dish detergent booster to prevent hard water deposits. It is basically citric acid and helps to polish the cases and remove harder deposits. Maybe a bit of lemishine with the brass and bronze parts would shine them up a bit dish soap may also keep the gunk from sticking to the prints.
@0calvin
2 жыл бұрын
Thanks for the tips.
@electron7373
2 жыл бұрын
Amazing result! Loved seeing all the cool tricks to get plastic looking like wood and metals.
@TheAxmore
22 күн бұрын
something you might consider a wire brush and doing a pass or two over the part to slightly gouge the part and simulate wood grain a bit more
@Nerdule
5 жыл бұрын
Woah! I didn't even realize that chest was 3D printed at first ... I mean, I'm sure it looks less realistic in person, but I had no idea 3D printers could do this sort of thing!
@0calvin
5 жыл бұрын
Thank you. It actually looks even more realistic in person. Everyone at work thought it was wood. Unfortunately one lady thought the key was real bronze too and turned it so hard that she broke it off in the lock.
@NaliTikva
5 жыл бұрын
@@0calvin 😭 poor 🗝
@theaces3697
4 жыл бұрын
i love that you show it in slic3r too, most people would just expect you to use the same one but that is great
@0calvin
4 жыл бұрын
Thanks. I use both since each one is better or worse than the other for certain tasks and printers.
@reinaweis
5 жыл бұрын
Great job ^_^ I love how casually you say things like "my other utilimaker". I need 3D printers in my life.
@0calvin
5 жыл бұрын
Thank you. I'm definitely spoiled with four printers.
@ELValenin
4 жыл бұрын
But PLEASE don't buy an ultimaker, they are overpriced as hell
@kevfquinn
5 жыл бұрын
Nice explainer - gonna have to try this as your results look much better than others I've seen!
@ColdFuse96
4 жыл бұрын
That bit with the Alexa at the beginning made me laugh so hard for some reason 😂🤣😂🤣😂🤣😂🤣 Great video, though! This is something I actually want to try out!!!!
@0calvin
4 жыл бұрын
Thank you. I'm glad you liked it.
@evgiz0r
5 жыл бұрын
you could also add fuzzy skin from cura with some tiny polygons, looks nice on wooden prints
@andrewmo49
Жыл бұрын
Amazing work and thanks for putting this video together. As a woodworker that looks like as much work as building this out of wood but great job.
@GreySectoid
Жыл бұрын
Awesome results!
@sugarbooty
5 жыл бұрын
Excellent techniques, thank you for sharing!
@JordanSC
3 жыл бұрын
Great video, looks just like real wood.
@jclc5791
5 жыл бұрын
Dude, you just got yourself a subscription because of the Alexa bit, bravo sir, bravo! 🤘🤘
@0calvin
5 жыл бұрын
Ha-ha, thanks. She is my plucky sidekick in a few of my videos.
@jclc5791
5 жыл бұрын
@@0calvin PS, sick workmanship, loved the video!
@Griffdog21
5 жыл бұрын
Very very nice video! I just bought a roll of Easywood filament and can't wait to try it
@0calvin
5 жыл бұрын
Great! I hope it works well for you. Thanks for watching.
@AndrewAHayes
3 жыл бұрын
The best quality oak is quarter sawn to give straight grain patterns and medullary rays
@rohitkishnani
4 жыл бұрын
nice to see some actually well though out comedy on an instructional video :) great content my dude
@olivieremeras6351
3 жыл бұрын
Best Wood post processing vidéo i've Seen so far. English is not m'y native language so can briefly explain to me how exactly thé tumbler is working and... Its original purpose ?...
@0calvin
3 жыл бұрын
The tumbler works like a clothes dryer. It scoops up the parts and drops them over and over again. My father used to metal detect (finding coins underground). He used the tumbler for cleaning the coins by adding small rocks with the coins and letting them tumble for an hour or two. It is useful for anything that needs to be polished, cleaned, or smoothed.
@andrewgardner7104
4 жыл бұрын
Tapey tap tap, mmmm a bit like Ave mixed with a bit of Old Tony. You've got potential. Subscribed.
@0calvin
4 жыл бұрын
Thank you. I don't do many 3D printing videos these days, but I appreciate the sub.
@swamihuman9395
5 жыл бұрын
Great job. Great video. Thx for posting.
@LiamBlais
4 жыл бұрын
Awesome video! Thanks
@urban1337
4 жыл бұрын
Alexa throwing shade 🤣
@toaf6467
5 жыл бұрын
looks cool, nice job
@SshanIcsS
5 жыл бұрын
Thank you for the Video. Its helps me alot.
@anibaldeviaje
3 жыл бұрын
Hello, could you please pass me the profile of the CURA? I have the same chimera and I can't print well
@SgtTaz
5 жыл бұрын
The copper filament you showed at the end is great! Maybe why it goes out of stock fairly fast ;) Thanks for the video
@0calvin
5 жыл бұрын
Yes, it is pretty nice in person too, although the parts I printed with it just didn't look right for the chest, so I may have to stick with the real brass and bronze.
@SgtTaz
5 жыл бұрын
@@0calvin this one looked like a metal wood to me-kinda neat though hobbyking.com/en_us/metal-composite-3d-printer-filament-red-copper.html
@0calvin
5 жыл бұрын
It does sort of look like antique brass. I might have to try it out. Thanks.
@scottwatschke4192
4 жыл бұрын
Nice.
@CIOWhitepapers
5 жыл бұрын
Great info, thanks for sharing : )
@LillySchwartz
4 жыл бұрын
This was awesome, really helpful! I just ordered a spool of wood PLA and I will definitely use your tips for finishing the prints. I won't bother with the metal filament though. Seems like a hassle and not really all that useful. I hope we get metal 3D printers for home use eventually!
@soulsbreaker
5 жыл бұрын
nice video dude! subbed!
@AndrewAHayes
3 жыл бұрын
If you paint mustard on copper if creates a turquoise like colour
@jusjaisinghani8179
3 жыл бұрын
Greek mythology part was lovely
@0calvin
3 жыл бұрын
Thank you. I always feel sorry for Hephaestus, the poor crippled bastard. He doesn't get a lot of notoriety these days. Perhaps because of his unwieldy name.
@julianthomas2742
Жыл бұрын
Does the trick with controlling the line directions work in Bambu studio?
@0calvin
Жыл бұрын
Sorry, I don't own one so I don't know. If nothing else, rotating the part should work I would think.
@avejst
5 жыл бұрын
Nice job Thanks for sharing :-)
@thebutcher1412
2 жыл бұрын
I have a brass tumbler for shell casings, it has walnut husk polishing media in it. Does anyone have experience using that to polish these plastic and metallic parts ?
@mjz187
3 жыл бұрын
Question for anyone who did this. How hard is the material... could I easily stab a knife though the material? I need something tuff as real wood.
@cdfairchild
4 жыл бұрын
Great video, and excellent results on the finished products. And maybe I missed it in the video, but what brand of filaments are you using?
@0calvin
4 жыл бұрын
Thank you so much. The wood is from MG Chemicals Wood PLA and can be found on Amazon. The steel is Protopasta Magnetic Iron PLA. The brass and bronze were ColorFabb BrassFill and BronzeFill PLA.
@joreal71
5 жыл бұрын
Nice video. Keep it up bro.
@0calvin
5 жыл бұрын
Thank you very much.
@mechaneil
5 жыл бұрын
Great way to make 3d prints appear like wood and metal. About your ultimaker original, how did you do your dual extrusion setup?
@0calvin
5 жыл бұрын
I tell a little about it here: kzitem.info/news/bejne/x6CsqKN-pIN_aWk
@DavidZimbeck
3 жыл бұрын
You could probably get a locksmith to copy the key out of actual metal and then avoid it breaking
@rodsnyder6020
5 жыл бұрын
Thats awesome! I want to dive into wood and metal filled filament post processing soon and this helps me a lot as it answers some questions I had. Do you think that metal polish also works with making the parts shiny? Thanks for the video. Cheers! Say hi to Alexa from me. ^^
@0calvin
5 жыл бұрын
Hey there Rod. I think a product like Brasso could work well in giving it a wetter, shinier look but that is one thing I have not tried yet. I did try an aluminum polish once (because that is all I had on-hand) but it did not work the way I had hoped, but I think it was really the wrong product for the job. Thanks for watching. Alexa says, "Who is Rod Snyder? Tell him hi or whatever. Are you still on the computer. You really need a life."
@rodsnyder6020
5 жыл бұрын
@@0calvinHey Brian. Thank you. Then I will try different metal polish compounds until one works. Your sassy assistant beta unit kicks butt! =|:-3
@massimocamillo7525
5 жыл бұрын
This is really cool, I love it. I would just like to know what filament you used however as I would like to replicate this myself Thanks
@0calvin
5 жыл бұрын
Sorry, I thought I mentioned them in he video. The wood is from MG Chemicals Wood PLA and can be found on Amazon. The steel is Protopasta Magnetic Iron PLA. The brass and bronze were ColorFabb BrassFill and BronzeFill PLA.
@massimocamillo7525
5 жыл бұрын
@@0calvin great thanks a lot 😊
@faxxzc
5 жыл бұрын
AvE Approves
@Mrbakerbaker
3 жыл бұрын
EXCELLENT VIDEO. Not much like it!
@hngldr
5 жыл бұрын
That iron filament IS magnetIC it's just not magnetIZED. Otherwise great video - thanks!
@andy-in-indy
5 жыл бұрын
I think the Egyptian god P'tah (god of artisans and craftsmen) predates the Greek ones, so he may be the original maker ;-) Good video with useful information. I liked, I subscribed, but I bought Svetlana's book instead. ;-)
@0calvin
5 жыл бұрын
OK, but Flicker World is now available as an audiobook so you can try that instead :)
@Trumplican
Жыл бұрын
seeing the rock tumbler is about 150 bucks i wonder what your father paid for it decades ago lol
@0calvin
Жыл бұрын
Are they really that expensive? I guess most of that is labor costs and probably company overhead since the demand for these is probably quite low and they obviously last for some time.
@uhitsethan
2 жыл бұрын
Wasnt paying attention, thought you said "i called her the 'N' word"
Пікірлер: 79