I HAVE one of these! Got it around 1962 and am still in love with it! Yes, it had a "Repossessed" label on it! I'm trying to figure out how to take out the gears to clean them (look yucky) and re-lubricate. So, that's how I got here. Love your appreciation of this machine!
@randyyoursewingmachineman9954
Жыл бұрын
Your gears are going to be fine as long as there’s no lint packed between the teeth causing a problem. If you want to clean them with a rag and some new grease, that’ll work as well. LEAVE THE GEARS IN PLACE. There’s a great story behind the “repossessed” sticker, so be sure to leave it on there. It adds to the provenance of the machine for folks who know the story. Singer got caught selling machines “as new” when they were not new but rentals, demos, etc. They had to pay a big fine to the FTC and place all the stickers on the machines. Singer was known to try a shady technique from time to time, back in the day. They almost always got caught. It became funny at a certain point. Like Charlie Brown, Lucy, and the football.
@judykay6253
Жыл бұрын
Thank you so much for your reply, Randy! I want to take the best care of this treasure! As for the red "repossessed" sticker - I know it was there but I must have removed it at some point, out of embarrassment, since I didn't know the Singer "scheme" - felt bad that it had been "taken". I'm wondering what the 'death knell' would be for this model? What can't be fixed if it breaks? Also, FYI, there is a sewing machine repair shop in Eau Claire, Wisconsin where John knows EVERY machine - where they were made, etc., and he can't find any young apprentices to learn and take over his business someday....So sad...
@randyyoursewingmachineman9954
Жыл бұрын
@@judykay6253 I have several customers who have your model Singer machine,and they have used them rigorously for 40 years or more. They usually need a new belt and a bobbin winder ring, and that’s about it. They’re fairly bulletproof. Some of them have a bakelite (non metal) belt pulley on the motor that has been known to fail. It’s rare, and usually caused by a customer prying on it when using an incorrect belt installation procedure. There are metal pulleys that are available if that happens. Otherwise they are trouble free. As for John, been there, done that. I gave up trying to find a responsible person to pick up the baton and carry on the tradition. Servicing sewing machines isn’t cool enough I guess. Then I see folks driving by on the highway with their sign on the truck that says “We pick up dog poop.” If that’s a better job, I guess I’ve lost touch with reality. 😎
@judykay6253
Жыл бұрын
@@randyyoursewingmachineman9954 You are soooo funny! I think that sewing machines would be a great eduction for apprentice work. Darn cell phone obsession now! Kids don't know what they're missing with the chance to work on "real stuff".
@randyyoursewingmachineman9954
Жыл бұрын
@@judykay6253 when the time comes, and it may be soon, some bright young man (or young lady) will accept the challenge to become a sewing machine technician extraordinaire. Life is a cycle of ebbs and flows. Some folks get a hint of what’s coming, based on clues from current events. Some folks gather info based on what has already historically transpired. Either way, at some point the need becomes too great to ignore, along with the obvious earnings potential. Things. Take. Time.
@theprojectproject01
2 жыл бұрын
PODIUM! I've often thought of getting one of these. The Maruzen Kenmores are of course vastly superior mechanically, but they have all the style and panache of a leftover chunk of drywall. The Singers work really well, and have great styling.
@randyyoursewingmachineman9954
2 жыл бұрын
Well said. LOL
@Mesagsp
Жыл бұрын
That is exactly how I think!!
@SebastianDeBeer
2 жыл бұрын
I thoroughly enjoy your videos and honesty. I have only recently got into the world of sewing machines after I got a ludicrous quote to do some sewing work that I needed done and realised that I could buy a machine for that money and learn a new skill along the way. I nearly fill into the trap of getting a new Singer HD machine and then stumbled across your page. I like the idea of having a machine that will last me for years and that is quality built. I also believe in the term “built like a Sherman tank”! I am picking up my 328P this arvo and look forward to it helping me to produce outdoor gear for years to come.
@randyyoursewingmachineman9954
2 жыл бұрын
Excellent. Have fun with it.
@SebastianDeBeer
2 жыл бұрын
She needs a good clean but I love it already.
@randyyoursewingmachineman9954
2 жыл бұрын
@@SebastianDeBeer 👍🏼
@looloo4029
Жыл бұрын
Oooh, 328P…..made in Penrith, Australia 🇦🇺
@joanneginever1890
7 ай бұрын
Made in Australia 😳👍Are you in Oz. I have the older 327P. No cams. I love it. Happy sewing with your machine. So glad you didn't buy a new machine. Ugg 😖. Well done🌟👏👏
@Idaho-Idaho
Жыл бұрын
I got a 328K last month at a local thrift store. I had years of grim on it and wouldn't turn over by hand. After a lot of work it running fine now. Came in a table and paid $20.
@randyyoursewingmachineman9954
Жыл бұрын
That’s a very good machine. A nice find on your part. Thanks for watching. 😎👍🏼
@TheNinjasm0ke
Жыл бұрын
after watching this video im glad i bought it. got it for 27 bucks at a goodwill. now i just need to find more discs.
@randyyoursewingmachineman9954
Жыл бұрын
The discs will mostly be for making decorative stitches that are zig zag satin stitches primarily. A drop of oil in the appropriate places, and this machine will give you years of service. 👍🏼😎
@claremckechnie5623
Жыл бұрын
Thankyou for this video, a very good honest review of the 328 (I have a 328P, which I believe was what this machine was called when made in Australia) Here In Australia we put these together for Singer in a Place called Penrith, the quality is just as good, and they look identical to the lovely machine in this video
@Mesagsp
Жыл бұрын
Great video! I recently acquired one of these exactly like yours. Mine said made in Canada and according to the serial Number it was made in st johns Quebec in 1961. Really nice job video
@randyyoursewingmachineman9954
Жыл бұрын
Thanks. I appreciate your positive comments. It’s a great machine for sure. Thanks for watching.
@robotbuster1487
3 ай бұрын
I did find one today, I did buy it. Other than the winder tire, its mint, with its fitted tote.. I was junking about out of my usual thrift store route today, and found it at a church rummage sale in the countryside. I kinda felt guilty about the price, but that was the price they quoted. I did buy a tray of carrot cupcakes at their bake sale since God watching Randy, in this video you compared the 328 quality/durability to that of a John Deer tractor. I stopped by an antique shop and inquired about sewing machines. The proprietor said he has old trendle types, but he has a customer that buys the old machines and turns the bodies into ornamental tractors . I'd love to see one of those. Have you ever heard of this? An old tractor does have the general shape/profile of an old sewing machine
@randyyoursewingmachineman9954
3 ай бұрын
I’ve seen the tractor conversions and they’re brilliant. Keep buying classic machines and you’ll need a bigger warehouse. Ask me how I know.
@robotbuster1487
3 ай бұрын
@@randyyoursewingmachineman9954 My 328 has just met my Singer 360 parts machine, and 360 has donated its stitch cams to 328. 🤪
@randyyoursewingmachineman9954
3 ай бұрын
@@robotbuster1487 perfectorama. Sometimes the plan works out.
@ronalddevine9587
2 жыл бұрын
You can't beat American or British workmanship. You may also want to mention that it is one of the only zigzag machines that can be treadle operated. You are so well informed and thorough in your presentation. Iker League!!
@randyyoursewingmachineman9954
2 жыл бұрын
Thanks sir. It’s just a lot of fun sometimes.
@ronalddevine9587
2 жыл бұрын
@@randyyoursewingmachineman9954 I can always count on you to answer. Are you anywhere near the fires?
@randyyoursewingmachineman9954
2 жыл бұрын
@@ronalddevine9587 the fires are about an hour west of me. I’m checking with three of my Quilt retreats that are nearby. If they can get it under control soon, they’ll be ok. Thanks for your concern.
@ronalddevine9587
2 жыл бұрын
@@randyyoursewingmachineman9954 I'll keep you all in my prayers 🙏
@randyyoursewingmachineman9954
2 жыл бұрын
@@ronalddevine9587 I appreciate that. If the winds calm down a bit, they can get their firefighting aircraft up and knock it out in a hurry. It’ll be tense for a couple days.
@deannalindsey889
3 ай бұрын
Thank you this machine is my latest addition to my collection of vintage singer machines and it seems like a good one. I have 201, 301, 303, 304, 500, 503, 15-91, 66 etc. I have tried to temper my need to collect these as I am running out of space as I have 25 which I know is a small amount compared to some of the collectors out there. Since I have been collecting sewing machines, I have learned a lot from videos like yours and others and the videos are so much appreciated. There is a crazy satisfaction to getting a machine cleaned up and running but I haven't had to replace any parts yet or do any major repairs, I don't think I am up for that.
@randyyoursewingmachineman9954
3 ай бұрын
It’s rare to have a component that needs replacing on any of these machines. That’s what makes them unique and awesome. Make sure you don’t get smitten by the need to acquire a couple 221 Featherweight machines. They will complete your collection and deplete your finances at the same time. (I only have 10 or so, no big deal) Good luck. 🍀😂😎👍🏼
@deannalindsey889
3 ай бұрын
@@randyyoursewingmachineman9954 Oh not to worry I purchased a singer 221 at the beginning of my machine acquisition for $25, I had to buy it in order to get a 66 and believe me I about fainted after I found out more about the 221 for the price I got it. I have noticed that there are two different styles of the 328K, can you tell me how you turn the light off on the model you and I have? Thanks.
@randyyoursewingmachineman9954
3 ай бұрын
@@deannalindsey889 look on the back of the light fixture on the backside of the machine. If your machine has the on/off button, that’s where it’s located. Some were under the light and kind of recessed.
@christy31180
2 жыл бұрын
I have this exact machine and I'm in love with it. However, I have had a very difficult time trying to figure out the numbered lines on the throat plate. What does each line represent? My manual doesn't explain it.
@randyyoursewingmachineman9954
2 жыл бұрын
It should be the distance from the needle to the line measured in fractions of an inch.
@billminckler6550
Жыл бұрын
LOL. Originally, I had the same challenge. I measured the distance to the needle until I could eventually see the pattern. My 328K is my everyday machine. ❤❤❤. Great video! 👏👏👏
@BlueFoxyEyes
6 ай бұрын
I just purchased a Singer 328k for a very good price. My question is the pulley broke off. I’m having trouble finding the pulley, but stumbled on a Singer 329k but it is metal. Are they interchangeable? I appreciate any help you might render. By the way it sewed absolutely fantastic.
@randyyoursewingmachineman9954
6 ай бұрын
I’ve replaced those motor pulleys with metal ones on many occasions. It will work just fine. 😎👍🏼
@layercake9568
8 ай бұрын
Hello. Thank you for your video. I just purchased a 328J (Canada) and cannot find a light bulb replacement. Do you have a model number for it? Also, I know that on this model the bobbin is noisier than "normal" but my bobbin is over-the-top noisy. I've watched every video I can find on cleaning and oiling the machine, I've adjusted the needle position. I'm lost.
@randyyoursewingmachineman9954
8 ай бұрын
I don’t know for sure that your bulb is different than the one in the 328-k. I guess that it’s the same. If so, it’s a very easy bulb to find. It’s a bayonet base, 15 amp, 110 volt bulb. I’ve seen them at fabric stores, Walmart, Batteries and Bulbs, Lowe’s, etc. It’s the push and twist type. It DOES NOT UNSCREW. That’s where most folks end up with a broken bulb. Push the bulb into the socket and turn it a quarter turn to the left, and you will feel it release. It will then pull straight out. To install the new one, push it in and turn it to the right until it locks in place. Noisy bobbin area: oil the hook that rotates around the bobbin case. If you’ve taken that part, make sure it’s reassembled properly. A fully wound bobbin is quieter than an almost empty one. A genuine Singer bobbin is quieter than a poorly made knockoff. There is a thread gap setting that could be causing excess movement of the bobbin case. I’ll see if I can make my next video on this issue. 👍😎
@layercake9568
7 ай бұрын
I have a 328J, I finally found a light bulb on Amazon. It's an LED. It was 9.99, plus 10.95 delivery, even for Prime Members. HQRP 110V LED Light Bulb Cool White
@randyyoursewingmachineman9954
6 ай бұрын
@@layercake9568 thanks for that info. That bulb fits a lot of Singer machines and a few Kenmores.
@layercake9568
7 ай бұрын
Can you use other flat cams that didn't come with the machine?
@randyyoursewingmachineman9954
6 ай бұрын
You can try them and see. Often times different cams interchanged. Won’t hurt to try.👍😎
@charlotterosser9936
Ай бұрын
My great aunt has just gifted hers to me, I’ve oiled it but it still isn’t happy, it moves but then slows down and the motor grumbles. The fashion disks don’t work as the little peg at the top moves in with the top adjuster but then gets pushed out and stays there, I’ve oiled that section again but still no joy, it’s nowhere near as fast as yours so I know something is up (and have taken a few apart to oil in my time) but can’t see anything obvious. Any ideas? I’d love to get this old lady up and running again
@randyyoursewingmachineman9954
Ай бұрын
@@charlotterosser9936 disengage the hand wheel clutch release knob. Run the motor at top speed until it sounds like a jet engine. If it’s reluctant, loosen the belt and try again. Make sure that all the oiling points are oiled. It should run as fast as the one I featured in the video. Don’t oil the motor unless it’s absolutely necessary. Then, just a perfectly placed drop on each end of the armature shaft.
@charlotterosser9936
Ай бұрын
@@randyyoursewingmachineman9954 thank you! I’ve got it running better but the drive belt has disintegrated which was likely most of the issue 😂 I’ve ordered a new one, the motor worked fine when the belt was disengaged and I’ve now sorted the tension and it’s all oiled ready
@randyyoursewingmachineman9954
Ай бұрын
@@charlotterosser9936 😎👍🏼
@soneil7745
Жыл бұрын
Do they like jersey knit?
@randyyoursewingmachineman9954
Жыл бұрын
All machines will do betting on jersey knit, if the machine is set up properly and using a Schmetz stretch needle or a Singer 2045 needle. Some machines have a straight stitch foot and straight stitch needle plate that helps also.
@lordsgirl1123
Жыл бұрын
Help! I took the stitch length regulator knob off to remove the stitch length cover plate and now I can’t get it back together!
@randyyoursewingmachineman9954
Жыл бұрын
The lever mechanism reassembly process is a puzzle. I encourage folks to take pics of the disassembly process to have as a reference. Since that wasn’t done in your case, you’ll have to rely on your problem solving and puzzle solving skills to put it back together. When the machines come to me as service/repair work they are generally in my shop for about 24 hours. I don’t have a 328 to make a video for you or I would do that. Sorry and good luck. If you lived in my service area, I would happily stop by and reassemble it for you in about five minutes. 😎
@dianawhite1628
Жыл бұрын
I have a 328k I'm have an issue with knowing what cam to use on different materials. Can u help me out ? Trying to sew a faux leather and the stitch will not hook . I have done everything u suggested to fix the issue and nothing has helped .
@randyyoursewingmachineman9954
Жыл бұрын
“The stitch will not hook”. I interpret that as the stitch is not being produced. As in: there is no stitch. Just empty holes in the fabric. About all it can be is a needle issue. Providing that no has has attacked it with wrenches or screwdrivers, that’s about all it can be. Make sure the needle is a 15x1 and has the flat side to the rear. It threads front to back. The long groove in the needle will be facing the operator, to the front. 😎
@davidanddavidstrading
6 ай бұрын
I have a 329k, do you think it is also heavy duty?
@randyyoursewingmachineman9954
6 ай бұрын
There is no real definition of heavy duty that is measurable or quantifiable. In my opinion, your 329K is as heavy duty as a household machine can be. By that, I mean, you can sew heavier than average fabrics without fear of breaking anything other than a needle. With steel gears, you can sew heavy stuff. You’re just limited in the strength of the thread that you use because of the limitations of the machines thread gap. It’s designed for garment thread, so it’s limited to using garment thread. (All purpose/dual duty)
@davidanddavidstrading
6 ай бұрын
I just noticed that it has three discs on the tensioner, maybe dual needle capable..And correct..It is no match for my Singer400w103. The presser foot tension on this machines is nuts. I think I'll keep that 329k, might put a button-holer on it,! Thank you for these great videos and chats! @@randyyoursewingmachineman9954
@randyyoursewingmachineman9954
6 ай бұрын
@@davidanddavidstrading correct on the tension assembly. There’s often two slots to place two threads for using the double needle option. Any machine that threads front to back, has the double needle capability.
@tuliochinchillanoriega8823
Жыл бұрын
Buenas tardes tengo una de esas en Colombia Bogotá
@randyyoursewingmachineman9954
Жыл бұрын
Excelente. Gracias.
@randyc8171
2 жыл бұрын
Does that have a rubber hook drive belt?
@randyyoursewingmachineman9954
2 жыл бұрын
No it doesn’t. It has a metal connecting rod that drives the shuttle. When I say it has all metal drive components, it’s not like when the salesman says it’s “all metal”. Salesmen are parroting the spiel, I’m trying to disseminate facts. I try to be accurate and informative because I’m not just trying to “make a sale”. Whenever I tout a sewing machine as heavy duty, it won’t have a rubber drive belt.
@randyc8171
2 жыл бұрын
@@randyyoursewingmachineman9954 It has a gear driven vertical shaft and gear driven hook shaft?
@randyyoursewingmachineman9954
2 жыл бұрын
@@randyc8171 no. It has a gear driven vertical shaft and a connecting rod on the bottom to drive the hook. It’s an oscillating hook (66 class) and not a rotary, like a 201. It’s a bit slower than a high speed rotary, but it still performs at the higher end of the speed and power range. The vertical shaft has a weighted flywheel on the bottom end to keep the torque optimized and maximize the “Puncture Power”. In other words, it’s a tank.
@jimleonardson4268
Жыл бұрын
I found one and bought it. $36 at a thrift store.
@randyyoursewingmachineman9954
Жыл бұрын
Excellent. That’s how it’s done. Congratulations. 👍😎
Пікірлер: 76