Thank you! There aren’t very many videos for these machines on yt. I got the exact same model as the one you have. (Which is how I found your channel). Your vids are really helpful.
@Xcallaburr
2 жыл бұрын
Thank you
@sherrywilliams1131
Жыл бұрын
Hi. This review is 2 yrs old Are you still using this machine? Have you experienced any issues? Do you still recommend this machine? Would you purchase it again? Would you consider updating this review ? Thank you !
@Oshileigh
2 жыл бұрын
Thank you for this demonstration! You sound like Seth Rogen also! haha
@Xcallaburr
2 жыл бұрын
thank you
@get2craft
Ай бұрын
Thank you for the video! How long have you had it now and does it still work well?
@beatrizvisca3404
Жыл бұрын
I would like to know, if this machine is good, because I looked at the reviews, and they have many problems, with the computer, it does not sew well, I hope someone helps, thanks
@kalanchoey
Жыл бұрын
I have been sewing for 50 years and never had these extra features! I purchased this machine and it is fabulous but when I sew through bulky layers the machine makes a clunky sound..... stitches are perfect - I did a test on regular fabric sound goes away? Did you notice a change in sound as you added the layers - Is this suppose to make that sound when sewing bulk and yes I do have denim needle in - Thank you
@Xcallaburr
Жыл бұрын
I used needle that came with the machine and no the sound didn't change, but I did go slower. I hope this helps.
@kalanchoey
Жыл бұрын
Thank you for letting me know.... :)
@latelierduherisson5830
5 ай бұрын
Pose un peu d'huile là où va la canette
@queenbee1548
2 жыл бұрын
I just bought the 6800C and my machine is not allowing me to sew through 4 layers of material for zigzag. It keeps sewing over the same spot. I tried all different needles including the denim and it still is not working. Please help me figure out what I am doing wrong.
@rdfjfgjyfdhfghy67456
2 жыл бұрын
Thank you for this!
@jjaylad
3 ай бұрын
Hi, I have this machine and sew fairly heavy stuff at 4.5mm stitch length with it. It is good except that the backstitch seems to be only one length ...2mm, almost the shortest length the machine sews, so it is impossible to reverse into the same holes unless set to 2. Have you found this, or possibly discovered how to make them match?
@Xcallaburr
3 ай бұрын
Hello Jaylad, unfortunately the feed dogs on this machine will not let it back stitch with that heavy. Could you turn the item that you are stitching so you can match the holes?
@jjaylad
3 ай бұрын
@Xcallaburr with a boat tarp, it's hard to turn. I'll do the tack stitch at the 2nd.last stitch position, then do it again at the last one. Then, hopefully, it will hold and look like normal spacing. It's really an annoying oversight on Singer's part. I tried your suggestion but couldn't get the needle to drop into a previous hole. It wants to advance a stitch on the downstroke.
@helenlorah43
Жыл бұрын
Do you still recommend this machine?
@Xcallaburr
Жыл бұрын
Yes, I really enjoy working on it and looking forward to doing more videos on it and projects.
@gennypadilla9808
6 ай бұрын
Awsome😮
@Xcallaburr
6 ай бұрын
Thank you 😊
@dianarojas6989
3 жыл бұрын
Hii, do u know if this machine would be able to sew on leather?
@Xcallaburr
3 жыл бұрын
Yes it will sew light leather for garments
@ligaskirbauska8652
3 жыл бұрын
With needle for leather it sews throw 10(I have not tried more cos that’s just braking machine and I didn’t got it just to prove the point) layers of leather even...any singer with leather needle will do till 6 layers for general
@Xcallaburr
3 жыл бұрын
@@ligaskirbauska8652 thank you very good to know
@glepana
3 жыл бұрын
Me convencio. La compro. 😉
@beatrizvisca3404
Жыл бұрын
y que tal es ? tiene muchos malos comentarios
@artology01
2 жыл бұрын
Hi, what size needle are you using? What’s the tension set on? Every time I’m sewing thick towels, the needle often break. Pls advise
@Xcallaburr
2 жыл бұрын
I use standard needle and setting that came on the machine out of the box. Possibly your going to fast or pushing the needle so it hits the base
@queenbee1548
2 жыл бұрын
@@Xcallaburr What is a standard needle and size? I'm sewing on cotton with a thin layer of batting and trying to zigzag through 4 layers and batting and it's not working. I even tried the 100/18 denim needle and it still isn't working.
@Xcallaburr
2 жыл бұрын
@@queenbee1548 are you breaking needles?
@queenbee1548
2 жыл бұрын
@@Xcallaburr No, the needles aren't breaking. I tried the heaviest denim needle and it still doesn't work. It works if I do a straight stitch, but not zigzag.
@Princetheone.
3 жыл бұрын
Why the machine is shaking ?
@Xcallaburr
3 жыл бұрын
it could be unstable or moving too fast
@dinglebat63
2 жыл бұрын
You're lucky you didn't snap the needle sewing at that stitch length.
@hugoender
3 жыл бұрын
Thank you for this video. How easy is it to control the slowest speed when sewing multiple layers of denim?
@Xcallaburr
3 жыл бұрын
Very easy, even at 10 layers the control is perfect. In fact the slower it is,, the easier it is for beginners like me. Sometimes it can be too slow. I am still working on straiter lines at faster speed.
@Xcallaburr
3 жыл бұрын
Thank you for your comments
@hugoender
3 жыл бұрын
@@Xcallaburr so is the motor more powerful than the motor in the 4400 series? Because I have a 4452 and at the slowest speed it’s not powerful enough to go through thick layers.
@Xcallaburr
3 жыл бұрын
@@hugoender how many layers?
@Xcallaburr
3 жыл бұрын
@@hugoender yes it seem no matter what speed the machine sews the same i will do some research and compare machine motor size. I will upload a video as soon possible show what I find. thank you for watching and your comments
@shazoification
3 жыл бұрын
Does this machine do chain stitch?
@kayemallory117
3 жыл бұрын
I have this machine, and no, it doesn't do chain stitch.
@artology01
2 жыл бұрын
Hi, what size needle are you using? What’s the tension set on? Every time I’m sewing thick towels, the needle often break. Pls advise
Пікірлер: 51