Probably the best exhaust review ever, eriously well done Rob. I have only just fitted a used CST3 to my Richard Taylor GT200 and it sounds and performs very similar to your Nordpeed. The Nordpaad does sound better and you described the CST tinny sound very well🖕🖕
@nigelwhybrow9257
10 ай бұрын
Dont those diesel splashes allways seem to be where we scooterists wanna ride
@daveharrison5647
9 ай бұрын
Hey Rob, can i ask what gearing and sprockets are you using with your TS1 ?
@kickbackgarage
9 ай бұрын
Yes you can 😃 it's a casa close ratio box with 46-18, which gives 4.9 final ratio
@anthonypickering5371
Жыл бұрын
Really great and enticing sound. Just cruising around really makes me want to go out on mine😊
@darrenreadings1294
Жыл бұрын
it may be a great pipe,but if you haver to cut a panel for it to fit it's not great i think SIP need to sort that out ,but saying that this is a great review
@EmilsonNunes-t9k
8 ай бұрын
THANK YOU...!
@jensclausen4140
Жыл бұрын
I do love how that engine pulls! I do love your roads! And your new camera is pretty good too 🙂
@iancarrington1967
Жыл бұрын
Sounds the part and performs well. 👍 The new camera is a good one.
@nikolastonic96
Жыл бұрын
I have 2 of these exhausts one on a ts1 240(smart carb) and on an rt240 (phbh30) and no fitting issues what so ever. Both pulling 4.6 gearing on cyclone gearboxes.
@tup1967
Жыл бұрын
Hi love the video is that the scoot with vape variable ignition on,just wondering if you fully advanced it allowing for so much retard on it thanks
@kickbackgarage
Жыл бұрын
Both my scooters are running static vape.
@nigelwhybrow9257
10 ай бұрын
Makes me wanna dig my lambretta out of the shed and go for a spin ,has been sat on the naughty step for the last two years as my Spanish tx 200 Vespa became the daily ride ,,,,
@josuealicea3611
7 ай бұрын
What crankshaft do u used ???
@kickbackgarage
7 ай бұрын
BGM 60x110
@kevinhendon
Жыл бұрын
Nice Video Rob, that scooter has got some GRUNT in it. Great sounding Exhaust mate 👍👍
@alanterrar8862
Жыл бұрын
That scooter really does pull Rob, looks like all the mechanical ducks are in a row, super review! Those roads look fab too.
@peterpartington8367
Жыл бұрын
VERY GOOD SOUNDS COMING FROM THE EXSORST ROB , GOOD VIDEO 📹 , CHEERS ROB 👍🏻😎
@paulbarber1960
Жыл бұрын
acoustic cameras are coming in fast in the uk, older vehicles (scooters) can't be louder than 83db how will this exhaust fair on a noise test. New vehicles 63db in a few years 😮
@kickbackgarage
Жыл бұрын
Proberbly not very well. 🤣 Looks like the UK has to go for clubmans in the UK in the future. In Norway motorcycles registered before 1971 are exempt
@nbodge3693
Жыл бұрын
Great review Rob, can you add the link to the exhaust , I’m seeing 3 pipes on SIP website ! I’m looking at another pipe for my TS230 & I’d likes to get this correct one 👍🚀
@kickbackgarage
Жыл бұрын
It is this one sir. www.sip-scootershop.com/en/product/racing-exhaust-sip-performance-touring-design-by-nordspeed_22070100
@MartinHyland-ty2rh
Жыл бұрын
I think that there's a mild steel version and a stainless version, then with or without an end can.
@ScooteristFellini
Жыл бұрын
Another great one. ❣Love the blue tape 😘💙💙💙
@kickbackgarage
Жыл бұрын
Don't know how that got there!? 😄
@ScooteristFellini
Жыл бұрын
🤣🤣🤣@@kickbackgarage
@grahamwalker6126
Жыл бұрын
Sounds great Rob, can you help me with a problem on rebuild, the inner threaded nut that attaches cable to speedo has disappeared down column, tried air no joy, any other ideas? Thanks
@kickbackgarage
Жыл бұрын
Nightmare mate. In hindsight, I alws fasten a zip tie under the nut. That being said, it's not really that hard to just pull the whole cable out.
@GrahamWalker-u2t
Жыл бұрын
Yeah. Thanks Rob. Agree with you. Cable out and new ordered.
@steveanddawn22
3 ай бұрын
Will this exhaust be any good with the casa ss200 kit and casa 4 speed close ratio box thanks
@kickbackgarage
3 ай бұрын
Yes! I bet it would work well.
@steveanddawn22
3 ай бұрын
@@kickbackgarage just need to find a seller in the UK everywhere seems out of stock
@steveanddawn22
Ай бұрын
Just got round to getting one and fitted it today omg what an animal it's made my scooter now very impressed
@kickbackgarage
Ай бұрын
@@steveanddawn22 Funny enough, I actually don`t make this shit up 🤣
@steveanddawn22
Ай бұрын
@@kickbackgarage for a 200 small block it goes very well scary in fact gonna have to do a riding vid tomorrow
@laurencemontague8331
Жыл бұрын
Would this go well on a rt195 kit
@kickbackgarage
Жыл бұрын
I imagine it will suit all RT kits but with a nod to Reed valve touring engines. I would like to see an improvement in fitment and I would like to see a RT 4 bolt stub option too.
@robertmee478
Жыл бұрын
I'm the guy that Rob mentioned in the video that had zero fitting issues with this exhaust (GP with RT225, non reed) . . . it fitted like a dream and goes like a rocket!
@CharltonSupporter
Жыл бұрын
Rob, how did you get the series 3 dip switch to fit the series 1 headset?
@kickbackgarage
Жыл бұрын
Tv2 switch housing.
@CharltonSupporter
Жыл бұрын
@kickbackgarage Thanks Rob. I didn't realise the TV2 was different to the LI. I just found one on Ebay. Thanks again.
@MartinHyland-ty2rh
Жыл бұрын
You've sold me ................................. on a BGM Clubsport.
@kickbackgarage
Жыл бұрын
It's really impressive for a box pipe. 😍 Love mine. It's easy to fit and easy to live with.
@CarlEves
Жыл бұрын
Great review thank you. I’m really happy with my CST3 on my imola. Does everything I need it to. The performance seems similar to this one 👍🏻
@dooftard1
Жыл бұрын
Sums up my experience with it exactly I love mine
@kickbackgarage
Жыл бұрын
Any fitting issues?
@dooftard1
Жыл бұрын
@@kickbackgarage yes I had to reshape a small bit of the cowl and I had to cut down the rear bobbin by about 15mm. Now fits perfectly I do not have rear runners or panels to worry about on my cutdown so I can't comment on the clearance for that
Пікірлер: 52