Much easier if jack is added for support before removing bolt.
@b864r
3 ай бұрын
How’s the build quality on the Sirimoto rear camber control arms?
@kentrugama7594
4 жыл бұрын
So my camber bolt will not go in anymore as the control arm is offset. There any way to remedy this issue?
@truben9061
5 жыл бұрын
Torque spec would be nice
@lexmichael2040
3 жыл бұрын
I’m kinda lost on why would I need to jack up my car once I install the bar?
@justinstevens4446
4 жыл бұрын
Could these essentially help with wheel rub?
@funeralfeast3554
4 жыл бұрын
Will the installation be the same for the 08' Coupe?
@Level99Dab
8 жыл бұрын
Hey ProCivic, I have been looking at and am interested in your SiriMoto line. I wanted to get all bars and trunk brace for my 9th gen civic sedan but the only thing stopping me right now are stats compared to other products. I was wondering if you guys had any videos/info on vehicles before AND AFTER installing of the bars (Lateral G Force reduction, braking/acceleration distances, etc.)??
@procivic
8 жыл бұрын
+Dank Unfortunately, we do not have videos on before and after. We can say that some of the them, for example the strut bar, has a lot less flex than other strut bars such as the Megan. you can also email our customer care department at customer@procivic.com for more details on the sirimoto line.
@Archers.paradox
2 ай бұрын
Be aware this isn’t a direct fit for the SI coupe, the plastic trim panel will need to be trimmed
@4by_yotaguy373
8 жыл бұрын
Does the rear undertray fit back on after the lower tie bar is installed? And thanks for all the quality products!
@procivic
8 жыл бұрын
+4by_yotaguy Yes, the rear tray will fit back after the install.
@studdly232
5 жыл бұрын
After the install can you put the under panels back on for a stock look ? Or do you have to leave them off
@procivic
5 жыл бұрын
It is possible to install it back, but may require some trimming to clear.
@dtkrob
8 жыл бұрын
Any chance this would work with a blackworks subframe brace? Or Is it pretty much the same thing ?
@procivic
8 жыл бұрын
+dtkrob We don't carry blackworks, but I think this does the same thing. Just a different name.
@callmeviper7723
8 жыл бұрын
Dyno numbers before and after please????
@heyitsthatoneguy91
7 жыл бұрын
ScottyLagoosh Every REAL car guy knows it doesn't take effect till you apply the decal that came with it to your back or rear window
@bilbobaggins5962
4 жыл бұрын
@@heyitsthatoneguy91 well played!!!
@bobfrankfurt9449
5 жыл бұрын
How much of a handling diff does this really make? I am ordering a front strut bar but would this work well together?
@procivic
5 жыл бұрын
Alone, it will add a bit more rigidity, but really comes to life when combined with the other chassis upgrade parts we offer.
@bilbobaggins5962
2 жыл бұрын
it doesnt... waste of money
@lukeskywalker1840
3 жыл бұрын
Not available for 6th gen civic?
@acedrake1698
4 жыл бұрын
Will this fit the coupe
@k24z7_4d.living
7 жыл бұрын
where can I get that banana ?
@procivic
7 жыл бұрын
The super market, lunch carts, fruit baskets, some vending machines (at least I think I saw it once), and directly from trees in Latin America. Thanks for checking out our channel we appreciate it!
@sireniag
5 жыл бұрын
combien de livre le serrage ? Torque Wrench
@reskoner760
7 жыл бұрын
what if i dont have a torque wrench? can i still do this install?
@procivic
7 жыл бұрын
+ReskOner SevenSixOh Though you can install it without one, it is best recommended to torque it properly. More for safety than anything.
@IloveMYbuhbuh1
8 жыл бұрын
damn Rudy needs a haircut...lol
@grabyourmochila4879
8 жыл бұрын
What's the difference between getting the Siri Moto front and rear , compared to getting the front and rear sway bars like eibach ? Or is it smart to get both . Sorry for the question I'm a noob to modding
@procivic
8 жыл бұрын
+Jonathan Bolanos The Sirimoto bars are for strengthening the chassis. The sway bars are for improving the suspension. Both do help when used together.
@MrKtb5000
6 жыл бұрын
I have a 2010 civic Dx and I’m currently modifying the suspension but I can’t find lower control arms
@procivic
6 жыл бұрын
Due to the way the suspension is set up, lower arms are not available. These would be very difficult to make.
@SHOTS-FIRED
5 жыл бұрын
Does the banana have to be metric or standard?
@procivic
5 жыл бұрын
Since the car is Japanese, a metric banana is recommended for accuracy.
@SHOTS-FIRED
5 жыл бұрын
@@procivic Thanks i almost ordered the standard version glad I watched this
@pasqualecanfora4601
7 жыл бұрын
Torque them to how many lbs?
@csorrows
4 жыл бұрын
Watch it again and pay attention this time. Maybe get the banana out of your ear as well.
@irwinhshsg
8 жыл бұрын
Where can i get the splash guards?
@procivic
8 жыл бұрын
+Irwin Reyea You mean the rear diffuser? That comes with all Si models.
@joeysmiff1746
8 жыл бұрын
What is the purpose of these tie bars?
@procivic
8 жыл бұрын
+Jo “Sw33t M1Zery” Sm They tighten up the chassis and prevent in from compressing / flexing during hard cornering. A rigid car frame is one of the most important things to have in a sports car, since it ensures the acceleration and cornering forces do work actually moving the car, instead of twisting it. Also, a rigid frame results in more precise and predictable handling.
@KingOfEden12
5 жыл бұрын
The right was way too fucking tight, left side came out pretty easily. Ended up rounding off the head of the bolt and now it wont come off. Just my luck lol
@chibixzero
5 жыл бұрын
I got the banana measurements
@procivic
8 жыл бұрын
For more information and/or to purchase the SiriMoto Rear Lower Tie Bar, follow this link: www.procivic.com/pages-product_car_part_info/category-69_176/product-2928/index.html?+phase+2+lower+tie+bar
Пікірлер: 49