To get started, you'll need this frame for your desk. Then you can build or buy the top and you're good to go! Corner Desk Frame - amzn.to/3sjYnzQ
@mustangeek
3 жыл бұрын
Looks good, I made a desk last year at the start of covid out of steel and oak, from there bought miter saw and more tools, then started to make some of my own office furniture. Made the wife a new kitchen table..
@AndiWofford
3 жыл бұрын
That's really cool! Wood has gotten really pricey for some reason lately. The white pine has gone up a couple bucks just in the last few months! You did good to get in early.
@mustangeek
3 жыл бұрын
@@AndiWofford in my area pine 1 x 12 x8 would cost me 12 something then it went up to 21 dollars.. that's not cheap finally it coming down some..
@AndiWofford
3 жыл бұрын
Happy to hear it's coming down!
@dennism.mcnamara3863
8 ай бұрын
Suggestion: To prevent warping during glue-up, put clamps snugly on BOTH sides of boards. This should prevent cupping. Also layout on flat surface with weights on top. Nice job and thanks. Happy New Year !
@AndiWofford
8 ай бұрын
Great suggestions! I've since bought a ton more clamps and will be better prepared next time!
@groteboem
Жыл бұрын
12:06 ‘I had to change it from metric to standard’ lmao
@thenakedsuperhero1926
8 ай бұрын
You are suppose to glue the entire edge of the board, not just the biscuits. The biscuits themselves don't provide much durability without that. Also, a glue joint is stronger than screws, especially stronger than a pocket hole joint. This is all why your boards warped, since they were not edge glued
@AndiWofford
7 ай бұрын
Thank you - learning a bit more every day.
@my_life_in_minnie_ears
3 жыл бұрын
Andi this is some beautiful and amazing work. I've no where near your skill or creativity.
@AndiWofford
3 жыл бұрын
awe, thanks so much Mikki! I had fun building it out!
@rkseifert
Жыл бұрын
Nice job I am planning on doing almost the same thing.
@AndiWofford
Жыл бұрын
Good luck!
@arlyn8211
2 жыл бұрын
Looks great! I hope I had the same creativity. lol
@genabromley3022
3 жыл бұрын
This looks amazing Andi! I'd love to try making one of these.
@AndiWofford
3 жыл бұрын
Thank you Gena! It's a satisfying build for sure! I had fun creating it!
@bulentakkas4937
7 ай бұрын
Absolutely super
@walkerscustomcountertops3144
3 жыл бұрын
Great job Andi !
@AndiWofford
3 жыл бұрын
Thank you Vaghn!
@TheSol408
Жыл бұрын
You are amazing, inspiring video!
@AndiWofford
Жыл бұрын
Thank you! 😊
@FishDS9
3 жыл бұрын
Enjoyed the video. Thanks Andi!
@AndiWofford
3 жыл бұрын
Thank you!
@merlinsk1
3 жыл бұрын
I love ❤️ Andi it is a very nice and very clean build.
@AndiWofford
3 жыл бұрын
Thanks so much Samantha! I worked hard on the video too 😂
@groovythehusky
Жыл бұрын
Wow
@johnnahealey5050
3 жыл бұрын
Looks Amazing!
@AndiWofford
3 жыл бұрын
Thanks Johnna!
@jsand1452
3 жыл бұрын
Beautiful
@AndiWofford
3 жыл бұрын
Thank you!
@jsand1452
3 жыл бұрын
@@AndiWofford welcome! I love your videos. :)
@justwondering786
2 жыл бұрын
Looks like a fun project to build, great job
@AndiWofford
2 жыл бұрын
Thanks! It was a lot of fun!
@bobbyhutter5654
2 жыл бұрын
kudos on the amazing build! this made me feel comfortable with purchasing the Monoprice triple-motor stand for myself (though im not nearly as skilled as you; ikea will have to do haha)!
@AndiWofford
2 жыл бұрын
Thanks so much Bobby! It was a fun project and after using it for a bit, I love it! Hope you enjoy yours!
@mclovinlove8368
Жыл бұрын
nice build
@kathyclark3808
3 жыл бұрын
Looks really great Andi, such a neat desk.
@AndiWofford
3 жыл бұрын
Thank you Kathy! Appreciate you watching!
@borneoization
2 жыл бұрын
Awesome job!
@AndiWofford
2 жыл бұрын
Thank you so much!
@borneoization
2 жыл бұрын
@@AndiWofford absolutely, I immediately ordered this frame and going to add my own top as well. Thank you for the inspiration :)
@AndiWofford
2 жыл бұрын
That's awesome! I wish that I could see how it turns out! But best of luck; it's a fun project!
@abesview5855
2 жыл бұрын
Amazing content!
@capone_rd_809
Жыл бұрын
You can also take your current l shape desk and add the sit stand legs for a way lower cost than what it takes to make one
@iamethnique
Жыл бұрын
do you have suggestions for one of these, but goes into coffee table height, I find it comfortable to be able to sit on the floor at times, so I currently have my set up on a coffee table, but being able to adjust from floor to chair to standing would be gold mine knowledge
@AndiWofford
Жыл бұрын
The one I'm using in my video adjusts from a height of 28.7" all the way up to a standing height of 48.4". I know coffee tables are usually below 20". The problem you'll run into is that you won't find a desk adjustable to standing height that drops all the way down to 16" because it's base/legs wouldn't be tall enough to adjust all the way up to 4 feet. And if it were, it would need to be much more robust than they usually come.
@liezlrebugio4467
2 жыл бұрын
Thank you for sharing your brilliance! Is there a reason to use 3 boards instead of one large one for the desk top? TIA! 😀
@AndiWofford
2 жыл бұрын
Thank you! I wanted a 30" width that looked good. The only way to achieve that was to use wood biscuits and combine a few boards together. I can't imagine what a 30" width board at six or ten feet would cost
@jadenwofford7093
3 жыл бұрын
yes
@AndiWofford
3 жыл бұрын
Thanks kid!
@wiltonsmith6248
Жыл бұрын
Is that a scent air machine I see?! At 4:08 in the video
@AndiWofford
Жыл бұрын
Great eyesight, yes!
@wiltonsmith6248
Жыл бұрын
Wonderful! I worked in hospitality for 5 years in the front office with Marriott and a few other properties and that’s how I discovered scent air. I now am starting up my own scent business just like scent air but it won’t be quite global, yet! I’m glad you are a DIY’er like myself. I already see lots of great videos.. keep it up!
@AndiWofford
Жыл бұрын
I wish you the best of luck with your scent business. I travel the globe and stay in Marriotts all over the world. I think I had a voucher or something and bought one of those machines. I like the smell, family not so much. Thus why it's in the garage 😂
@kevinkondric1507
2 жыл бұрын
Here it cost 750 with everything and 600 just the legs
@alaricace8118
Жыл бұрын
I can almost hear the voice, You should turn the music volume up a bit more!
@chinoyt7995
3 жыл бұрын
👋 👍
@abbirotter2527
2 жыл бұрын
Hi! Would love new videos. :)
@AndiWofford
2 жыл бұрын
I'm getting there, it's been so busy
@abbirotter2527
2 жыл бұрын
@@AndiWofford no hurry gorgeous :)
@abbirotter2527
2 жыл бұрын
When are we gonna get a new video 🥺
@AndiWofford
2 жыл бұрын
I've got one shot and scripted, just have to do the editing
Пікірлер: 67