Excellent video demonstrating the S9 and providing some tips and ideas.
@bunudemine7840
Жыл бұрын
Hola, gracias por las ideas. Un saludo.
@007JHS
Жыл бұрын
Some great ideas...! Thanks.
@SCULPFUNReal
Жыл бұрын
😆😆
@Georges-MILLION
2 жыл бұрын
Super démonstration ! Merci ! Great demonstration ! Thank you !
@3djulien
2 жыл бұрын
Merci pour la démo
@kya8721
5 ай бұрын
Pls give me setting of the stainless steel 😢
@gypsyofcruzz
Жыл бұрын
Someone knows the settings for the cat portrait ? Power and speed
@HybridlifeOrg
Жыл бұрын
With the settings used it would have been great
@adeilsonvieira2263
13 күн бұрын
Tenho uma S30 Pro, essa empresa só quer vender não dá nenhum tipo de suporte aos clientes, e quando perguntamos algo eles respondem outro assunto aleatório, arrependimento total.
@marcovicino8521
8 ай бұрын
Hello! fantastic video! i have sculpfun s9 but when i try to remove varnish i see small line in my design...the varnish is not completly remove...how can i do? i use power 10%, interval 0,08 and velocity 40 mm/s...
@adianajayatrading4406
Жыл бұрын
Can cut n engrave rubber sheet for rubber stamp
@fredericmuller7371
2 жыл бұрын
Please explain how to have a circle round 😢
@user-dv4dx9hx2k
Жыл бұрын
Ciao. Come si fa mettere a fuoco? Io uso lightburn. Grazie
@mangjose03
2 жыл бұрын
Would you mind to share how long the engraving would take?
@cwai79
Жыл бұрын
Is it suitable for picture engraving on thin material surface?
@JuanDeDiosMoises1234
2 жыл бұрын
My s9 can cut 4mm white acrilic?
@theolasvegas
2 жыл бұрын
Where did you buy the air assist nozzle that you added?
@SCULPFUNReal
2 жыл бұрын
Factory processed. The new version of the S9 laser head has it.
@stevegrant6464
9 ай бұрын
Settings?
@maroildofilho5826
2 жыл бұрын
Friends, send the Rotary Roller with 360 to the warehouses with stock for Brazil! .... PLEASE
@SCULPFUNReal
2 жыл бұрын
you can try alibaba, mtw.so/5UGFjw
@Dancopymus
Жыл бұрын
Hi friend, thanks for the great video; I have a few questions: 1) What kind of ink did you use in engraving the Stainless Steel? (I have the xTOOL D1 Pro 10W, and I did a test of that but did not use ink). 2) On the Tile, are the three layers of paint you apply water-based? 3) Finally, what settings do you think I should apply (Tile), using a 10W laser? Thanks
@user-hl9pi6lu1n
Жыл бұрын
1.Sculpfun 10W laser can sculpt stainless steel without hacking(9mm/S,100%) 2.If the parameters are accurate, it is enough to spray only a layer of black paint 3.kzitem.info/news/bejne/tYBu0GZ4m6CeaX4 Spray a layer of black paint evenly. Then refer to this video, use the gradient test picture, set the width at least 100mm. The paint is easy to sculpt, so the speed can be faster, and the power is not need too high. You can test the accurate parameters yourself.
@user-hl9pi6lu1n
Жыл бұрын
What speed do you often use with XTool?
@Dancopymus
Жыл бұрын
On a Stainless Steel pendant: Power = 100%; Speed = 3mm/s; Pass = 1 (directly, without any paint). On acrylic, I haven't tested it yet.
@joshuelicasartscrafts1250
2 жыл бұрын
Why my engraving produces vertical line, though I engraved it horizontally..
@SCULPFUNReal
2 жыл бұрын
You should check the software setting
@joshuelicasartscrafts1250
2 жыл бұрын
@@SCULPFUNReal im only using lasergrbl.. what setting should I fix?
@joshuelicasartscrafts1250
2 жыл бұрын
The engrave look like it has the texture of the belt..
@SCULPFUNReal
2 жыл бұрын
@@joshuelicasartscrafts1250 vertical or horizontally can be adjust, you can search on lasergrbl website
@FernandoNeri7
2 жыл бұрын
what is the setting to cut 6mm mdf?
@SCULPFUNReal
2 жыл бұрын
6mm MDF is hard for 5W laser, you can try SCULPFUN S10 laser
@veepho
2 жыл бұрын
Can cut Rowmark ?(sheet plastic)
@SCULPFUNReal
2 жыл бұрын
Yes,
@veepho
2 жыл бұрын
@@SCULPFUNReal I cannot connect with Mac Monterey you can help me
@SCULPFUNReal
2 жыл бұрын
@@veepho you can ask support@sculpfun3d.com for help.
@veepho
2 жыл бұрын
@@SCULPFUNReal Thanks.
@anthonymontemayor6134
2 жыл бұрын
Hi! can this machine cut transparent acrylic?
@SCULPFUNReal
2 жыл бұрын
she can't , need to use CO2 laser. Diode laser is good at cutting wood or black acrylic.
@anthonymontemayor6134
2 жыл бұрын
@@SCULPFUNReal is it bad to use 100% power? I'm cutting plywood with 4 to 5 passes and 100% power, at 400mm/m speed
@SCULPFUNReal
2 жыл бұрын
@@anthonymontemayor6134 80% power is also ok. Only wait a longer time
@anthonymontemayor6134
2 жыл бұрын
@@SCULPFUNReal Does using 100% power shortens the lifespan of the laser diode?
@SCULPFUNReal
2 жыл бұрын
@@anthonymontemayor6134 only a little influence, diode laser is much longer than CO2 laser in lifespan
@MarcDanielsMusic
2 жыл бұрын
It can cut mdf?
@SCULPFUNReal
2 жыл бұрын
It can be cut about 3-5mm, but it is very easy to burn black, which affects the cutting efficiency. But our next generation products can solve this problem.
@MarcDanielsMusic
2 жыл бұрын
@@SCULPFUNReal cause I have this model and the kit expansion and I bought to do guitar templates on MDF. Wich parameters you recommend to cut MDF of 5? Thank you
@SCULPFUNReal
2 жыл бұрын
@@MarcDanielsMusic 100% power , 3mm/s
@Jer0867
2 жыл бұрын
Interesting video....but spoiled by that annoying "rave music" which does nothing to improve it. Why is it used? I just can't see the point. Only kids or teenagers would enjoy this kind of rubbish.
Пікірлер: 49