Very very cool should make 1 out of aluminum or something maybe better than plastic that changes in temperatures and better weight placement
@RANGERone88
5 ай бұрын
Someone needs to gear up the character so when you turn, it leans into the turn and put that weight over to the side that should work meant if someone hasn’t done that already
@JuanMendez-uj4vr
5 ай бұрын
How can i find the print file for the guy you have on the snowmobile
@billyjaggard9696
11 ай бұрын
Where can I get a rider from
@chilly7261
11 ай бұрын
Amazon... Click N' Play Sports and Adventure Snowboarding 12" Inch Action Figure Play Set with Accessories. a.co/d/b9bEHaz
@ashtonharwell7091
6 ай бұрын
Very cool
@malsonw
9 ай бұрын
I have mine printed but on test i broke my slides right behind the rear track suspension... have you had any issues with that or is it too mush throttle to fast?
@tripkip81
9 ай бұрын
where can I buy the files
@chilly7261
9 ай бұрын
MyMiniFactory has it... www.myminifactory.com/object/3d-print-skeeride-2-267859
@collinmccallum
Жыл бұрын
"just gonna send it!"
@keenanstahl
Жыл бұрын
Unlike most other vehicles, the skis on snowmobiles are actually aligned parallel and usually slightly toe out. It reduces darting. Deep snow machines like a Freeride are often parallel and trail snowmobiles are usually toe out. I suspect a scale model will handle more like a trail snowmobile.
@chilly7261
Жыл бұрын
Thank you. I didn't know this. I will try some toe out this winter. That's exactly what it feels like, darting on turns...
@keenanstahl
Жыл бұрын
@@chilly7261 here is the procedure kzitem.info/news/bejne/lZhnuKB4cIF6i20si=ENEBAs6q2Ri4YMv3&t=1115 He is going for parallel on this deep snow sled. 1/8"-1/4" toe out is typical (Polaris owners manuals publish the values and procedure...I just looked at my daughters 2016 600 Indy manual). Obviously you would want to scale this dimension to your model.
@chilly7261
Жыл бұрын
@@keenanstahl Thank you. I'm looking forward to trying this...
@louislemire2995
10 ай бұрын
hi sam. where do you buy the little driver.
@chilly7261
10 ай бұрын
I answered that in a comment below. Included an Amazon link...
@ProjectMotoGraphics
Жыл бұрын
Maybe wider skies?
@chilly7261
Жыл бұрын
That's a thought. I printed the +6mm ones. Will the +10mm make much difference. Our snow right now is bad. It's got a thin crust on top and it's soft underneath. Feels like it either slides on top, or breaks thru and sinks. Idk...
@MikeEmery-f7s
Жыл бұрын
Hi Sam....very nice build! What did you use for the shocks on this sled?
@chilly7261
Жыл бұрын
Thank you. Bought them off Ebay, 1/10 scale shocks. Not expensive at all...
@MikeEmery-f7s
Жыл бұрын
@@chilly7261 Excellent...thanks. Do you have the link or the size that is required? I appreciate your help!
@chilly7261
Жыл бұрын
@@MikeEmery-f7s The manual has the sizes you need... www.ebay.com/itm/385226005680?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8ff4ietorja&sssrc=2349624&ssuid=UvvAiO-yQKS&var=653105600313&widget_ver=artemis&media=COPY
@MikeEmery-f7s
Жыл бұрын
@@chilly7261 I don't have a manual yet, just in the planning stages of this build. I greatly appreciate your help!!!
@jonathandemaria1865
Жыл бұрын
Looks Awesome Sam.Can I ask you a question about the flycolor 150 esc. If you have the branded 1 and not ose's could you look at the voltage of the caps and tell me what they are please. Thanks
@chilly7261
Жыл бұрын
Thank you. I do have the Flycolor 150 esc in my JAE 33. It's hard to tell, just part of them stick out, but I see 35V on one of the caps. Does that sound right?
@jonathandemaria1865
Жыл бұрын
@@chilly7261 and it's a flycolor not a ose raider.
@chilly7261
Жыл бұрын
@@jonathandemaria1865 Yes, a branded Flycolor 150 esc
@jonathandemaria1865
Жыл бұрын
@@chilly7261 I ask because I have both. Ose 35v my FC 25v.
@chilly7261
Жыл бұрын
@@jonathandemaria1865 Strange. I also have both. I just checked, and my OSE has 35V caps in the esc plus the add on ones. But both my Flycolor and OSE are 35V caps. I can clearly see 35V on at least one cap in each esc...
@Higuys1aaq223
Жыл бұрын
How much to make me a 2023 ski doo lynx shredder
@chilly7261
Жыл бұрын
That's not happening, mostly because the time it takes to print this. But also I'm not an authorized seller. The files are copyright protected. That said, search SkeeRide 2 on Ebay, the are several authorized sellers advertising them for sale there. Actually at a very reasonable price imo. I love the fact that you're interested. The files are only $30 to buy. Printing your own sled is the best way to go...
@Higuys1aaq223
Жыл бұрын
@@chilly7261 ok thanks my high school has a printer illl just use that one thanks for advise bud
@Higuys1aaq223
Жыл бұрын
@@chilly7261 where do you get the motors at
@chilly7261
Жыл бұрын
@@Higuys1aaq223 Amazon. This is a high end setup. But it won't disappoint for sure... Mamba X, SENSORED, 25.2V WP ESC and 1515-2200KV SENSORED Combo a.co/d/2hideUl
@Higuys1aaq223
Жыл бұрын
@@chilly7261 just ordered thanks you so much have a good day
Пікірлер: 39