After following one of my riding buddies who has a set of these mounted on his RT, I decided these are too good not to have myself. This installation is a snap. The wires on the bike that are used are as follows:
Switched power-- Red wire with green stripe at the front fuse block
Indicators -- Blue with red stripe is left, Blue wire with black stripe is right
Brake light-- Gray wire with black stripe
Ground -- brown wire
The camera represents the intensity well, but what doesn't translate is how the "shimmer" (flicker) of the running light function constantly captivates your attention when following-- which is the point.
I have the set that incorporates the turn signals.
One side note not mentioned in the video, during my install, one of the post-taps "missed" the wire it was intended to pierce, and as such I had an issue.. until I found the problem -- and then re-attached the connector, fixing the problem.
Негізгі бет Автокөліктер мен көлік құралдары Skene Design Auxiliary Brake lights
Пікірлер: 21