thank you, your video is much better than the BRP instructions
@robinkoenig
Жыл бұрын
Good to hear that my video helped you. Thanks.
@opmope
8 ай бұрын
Great Video. Thanks ever so much. Just an FYI for you DIYers.The template you screw on the side of your sled to drill your pilot holes?? Once pilot holes are drilled. You then have to break off the template portion LEAVING the screw and slide portion of that template for the bottom of the light to slide into to secure the bottom of the light in place. I original removed the complete template and replaced the OEM screws and the light was wiggly as jello lol. I then knew something was wrong. Another tip before mounting light. Plug wiring harness into lights so the don't fall on the ground while adding the inner mounting plates and screws. The mounting plates are a pain in the ass to hold i such a compact place. I used mechanical wire and put through one of the holes just so I don't drop it into the engine compartment. Loosely add one screw then pull out mechanical wire from second screw hole.
@joshuamacdonald1885
3 жыл бұрын
Thanks rob. The instructions do not mention taking the existing screw out to mount the clip. Was driving me crazy to understand the instructions lol. Thanks!
@robinkoenig
3 жыл бұрын
Glad this video helped to clear up that issue for you! You will love the lights.
@jsboening
5 жыл бұрын
Nice video! Those aux lights look insanely bright. 👍🏻
@loyalmoses1677
3 жыл бұрын
Thank you Rob!!! Because of your easy vid installing I went ahead and got myself a xmas gift! 👌🏾😂 LED Highbeam!
@robinkoenig
3 жыл бұрын
Glad to hear that! Marry Christmas to you!
@loyalmoses1677
3 жыл бұрын
Yes merry Christmas.. riding on a 2021 900 ace Turbo right now! Love the sled man. ❤️
@josephparsons4340
3 жыл бұрын
Is there any warranty on these LEDs..? At 440 bucks you'd hope they would be good quality light
@robinkoenig
3 жыл бұрын
Yes. BRP accessories have a 1 year warranty.
@michaelhabada3493
2 жыл бұрын
Let's ride brother!!
@Owen_Klick
2 жыл бұрын
Has anyone rigged these light up for a rev-xs?
@lobster1002000
3 жыл бұрын
I have the sil lights installed, will it effect their opertion.
@robinkoenig
3 жыл бұрын
It shouldn’t.
@sambuvca22
2 жыл бұрын
love drilling holes in a brand new machine ugg
@robinkoenig
2 жыл бұрын
Agree! It’s a clean install though so nothing shows.
@kevinmarkey3677
4 жыл бұрын
Why on the box the lights came in it looks like one light is larger than the other? I purchased 860201651 for 2020 900t enduro gen-4 wide body an the lights are the same size. Is this correct or did I receive the wrong ones?
@robkoenig
4 жыл бұрын
Hi Kevin. The lights are both the same size. They are a matched pair.
@kevinmarkey3677
4 жыл бұрын
Rob Koenig - Ski-Doo Trail Ambassador Ok thanks a lot Rob,and thanks for video,I’m gonna need it lol! Doesn’t look real hard to do ill just take my time.
@robkoenig
4 жыл бұрын
Kevin Markey You are right. Not difficult but just take your time. Use good sharp bits when drilling the three holes with the template. Have fun!
@kevinmarkey3677
4 жыл бұрын
Rob Koenig - Ski-Doo Trail Ambassador Ok thanks again!
@kevinmarkey3677
4 жыл бұрын
Rob Koenig - Ski-Doo Trail Ambassador Rob do you know of any videos of installing snow trackers on ski Doo adjustable ts skis? Thanks
@briansevert1211
4 жыл бұрын
Is the beam adjustable?
@robkoenig
4 жыл бұрын
Not really. Has a pretty good coverage. I’ve installed a few sets and nobody has asked to re-aim them.
@briansevert1211
4 жыл бұрын
Rob Koenig - Ski-Doo Trail Ambassador They are on the sled I bought but they seem to aim down a little low. Just thought there might be someway to adjust them up a little. Thanks. Great video
@robkoenig
4 жыл бұрын
Brian Severt I’m wondering if they were installed correctly? Have you rode with them? Send me a pic if you can from the side.
@briansevert1211
4 жыл бұрын
Rob Koenig - Ski-Doo Trail Ambassador I wasn’t able to send a pic here. I sent one to you through messenger.
@ahill7866
5 жыл бұрын
As soon as I see the drill come out, that makes this accessory permanent. Lost me with the drill
@machz990
5 жыл бұрын
ahill7866 I initially thought the same thing but the holes are in flat black plastic. Black push plugs are available that when inserted would be virtually indistinguishable.
Пікірлер: 30