The coil spring had snapped on my Mk1 Skoda Fabia so it was time to replace the coil spring, top mount and bearing.
00:00 - crack wheel bolts and drive shaft nut, jack up vehicle and remove wheel
00:40 - remove track rod end ball joint nut
00:54 - remove drop link from strut
01:10 - remove hub carrier strut pinch bolt
01:37 - remove drive shaft nut
01:42 - remove lower ball joint to wishbone bolts
02:04 - remove ABS sensor and brake flexi hose from strut
02:20 - expand hub carrier and remove hub carrier from strut
02:34 - remove strut from car
02:52 - compress spring and remove damper piston nut
03:26 - examine old components
03:42 - install new components
04:21 - tighten damper piston nut (torque 60Nm)
04:39 - install strut on car
04:58 - expand hub carrier and install onto strut
05:32 - install drive shaft into hub
05:59 - tighten lower ball joint to wishbone bolts (torque 20Nm plus 90 degrees)
06:26 - tighten track rod end ball joint nut (torque 20Nm plus 90 degrees)
06:45 - tighten drop link to strut nut (torque 40Nm)
07:01 - tighten hub carrier strut pinch nut (torque 60Nm plus 90 degrees)
07:45 - attach flexi brake hose and ABS sensor to strut
08:06 - install wheel and lower car to ground
08:23 - tighten strut to body bolts (torque 15Nm plus 90 degrees)
08:50 - tighten wheel bolts (torque 120Nm)
08:55 - tighten drive shaft nut (torque 50Nm plus 45 degrees)
#skodafabia
#coilspring
#topmount
Негізгі бет Спорт Skoda Fabia MK1 front coil spring replacement
Пікірлер: 13