Step by step guide on how to remove & replace one of the front wing panels on a Mark3 Skoda Octavia (made from 2013 to 2020). You will need to remove the bumper first, see this video: • How to Remove the Bump...
Tools & supplies you will need
IPA rubbing alcohol: geni.us/IYM6tF2
3M double sided tape pad: geni.us/cYYZRp
Blu-roll cloth: geni.us/eas3oQP
1/4" socket set: geni.us/GSRN0q7
T20, T25 Torx Bit: geni.us/ARN2vDL
Screwdriver set: geni.us/PKUmD
(optional) DeWalt Impact Driver: geni.us/1dMRxm
(optional) Impact driver adapter kit: geni.us/B1cL
(optional) Mechanics gloves (I LOVE these): geni.us/Sg0hFAw
Disclaimer: If buy from the links above I receive a small commission which helps fund the channel.
If this helps you, please consider liking and subscribing. Any questions or feedback - please leave below!
00:00 Introduction
00:18 Step 1: Remove easy bolts on top
00:37 Step 2: Remove top bolt behind door
00:48 Step 3: Remove wheelarch liner
01:30 Step 4: Remove baffle
01:41 Step 5: Remove 3 inner nuts
02:12 Removal complete, reassembly commences
02:14 Step 1: Offer up wing to body
02:34 Step 2: Make adjustments as necessary
02:58 Step 3: Insert all bolts loosely, then tighten
04:42 Step 4: Replace all baffles
05:57 Step 5: Replace wheelarch liner
Негізгі бет Тәжірибелік нұсқаулар және стиль Skoda Octavia Front Wing Panel Replacement Mk3 (2013 - 2020)
Пікірлер: 8