I’m fbo with the plm v2 header + q300 exhaust n it actually feels really good, people knock on this combo but it’s actually really really good n it’s not loud but definitely can hear it when u get on it, your setup reminds me of mine but more expensive lol
@billpham632
Жыл бұрын
Just got this setup with the new PLM header hfc. Sounds really good in the videos I’ve watched
@npvfa5
Жыл бұрын
I believe the Ktuned header I used to have and PLM V2 are identical. It’s definitely a good setup, I’ve never heard the q300 in person but I’ve heard a lot of good things about it.
@Sosababy_D
8 ай бұрын
Got the same thing really nice very happy with it to be honest gonna but a v2 tune it sound hella nice and make decent power
@asaellopez1036
Жыл бұрын
bruu your 8th Gen is so fucking clean I legit was talking about running this set up on my 8th Gen and I haven’t seen anyone yet show it like how you did 🙏🏼🙏🏼🙏🏼
@NightFlight1973
2 ай бұрын
Damn, I was thinking the same. No snow there OP is I guess?
@LaptopCivic
29 күн бұрын
I like:) going supercharged soon, I have your setup now but with hybrid intake installed, you will love it, sucks you live in cali, in Washington I can have a bumper dump pipe lol they don’t give a fuuu
@FredoLsi
Жыл бұрын
hyped for your build bro
@gearhead3500
Жыл бұрын
pros an cons about the 8gen as a daily driver bro might be getting one
@npvfa5
Жыл бұрын
Great idea, I’ll make this one soon
@jasonmcmanus3577
Жыл бұрын
All pro no cons, great car, only con actually is probably mpg
@Roobsrandomz
Жыл бұрын
Pro's: - Easy to work on. - Aftermarket parts (some decent and worth using reliably) - Good turning radious, lots of space - 6 speed manual, good interior + speakers/stereo system for modern time with aux - good braking/ handing/ control for a mid-modern car - k24 swaps are very cheap once engine blows Con's: - GOOD quality parts, bearings, suspension are quite $$$ and harder to find including quality suspension components - k20 platform is gutless in stock form - k20 has a cast issue known to mix oil/coolant causing slow failure over time - k24 are cheap, but having to swap your car before 200k is a pain coming from a well over-engineered japanese platform - Transmission requires corrective engineering solutions to fix shifting issues. (shift bushings, base bushings, 15k MTF fluid change, Slave + master + line replaced with quality aftermarket containing NO* extra delay valves, and lastly high mileage clutches are all gunked up leading to the cliche stigma of bad shifting issues in this platform**) Every car has it's pros and cons, this platform isn't for everyone. All platforms require some research to have a long lasting vehicle.
@zimtron9589
Жыл бұрын
I had this exact setup on my '08, it was the cleanest sounding Honda I've ever heard ... got a lot of complements as well. The only issue is that the doughnut gasket always leaked, I even tried three different ones before finally giving up on a permanent fix.
@seanellis5696
Жыл бұрын
what gaskets did you use? lol
@zimtron9589
Жыл бұрын
@@seanellis5696 Stock gasket, included one and I think one from an S2000 from a suggestion on 8th civic forum. Hopefully you dont have any issues, I read some other guys welded in a flex pipe eventually.
@seanellis5696
Жыл бұрын
@@zimtron9589 only time will tell i'm using the s2k and no issue at all so far but i'm early in still
@bluur.r6
Жыл бұрын
how much louder do the headers make it?
@Garrettskate
Жыл бұрын
I’m currently running the k tuned header with full race exhaust and a hybrid racing CAI and wow does is sound good!
@npvfa5
Жыл бұрын
The full race gives our cars the perfect mix of exhaust and intake noise!
@strivzy5240
Жыл бұрын
u mind sending a vid clip with the ktuned header? Im about to cop a full race and want to now how it sounds
@fd_ctr204
Жыл бұрын
hey man love that exhaust set up, im def gonna go with this for my si, how did you get the red stitchings done on your doors btw?
@npvfa5
Жыл бұрын
I did it myself. You have to take off the door panels and drill out the piece that holds the fabric. Then you can change it to whatever fabric you want. I made a tik tok about it a long time ago if you want to look for it, my account is @nickpanyanouvong
@npvfa5
Жыл бұрын
www.tiktok.com/t/ZTRcp2kaA/
@rastaman7140
Жыл бұрын
Where did you get the red fabric from?
@FredoLsi
Жыл бұрын
dude im so hyped for this lol, omg
@desroth
Жыл бұрын
"Got state reffed" Tell me you live in a place no one should be subjected to without telling me you live somewhere no one should be subjected to.
@d0mochi
Жыл бұрын
Love me some 8th gen content
@indiobaez3314
Жыл бұрын
Great Video!!!!! Any Clearance Issues With The SK2 Header?
@saulruiz9467
Жыл бұрын
I’m going all stock had the full bolt on and man i think I’m just getting old thing is just too loud 😂, also how much louder is that exhaust compared to the stock one? but how do you like the head unit do you recommend?
@user-eq2je6nc8i
7 ай бұрын
So does this header get rid of the cat
@Rence_FA5
6 ай бұрын
Yes
@yukonstriker1703
3 ай бұрын
Wheelbase of the Coupe is 2" shorter than the Sedan, hence why it didn't fit.
@isoheru
Жыл бұрын
sick car brother love the setup. is that a custom steering wheel? looks clean asf
@npvfa5
Жыл бұрын
Thanks! it’s a custom wheel from Hybrid Retrofits!
@Sosababy_D
8 ай бұрын
75K likes but only 450 subs something is wrong here 😅
@erirenteria110
Жыл бұрын
Love the setup, I think I wanna run it on mine. Where did you get the spoiler and radio screen from?
@npvfa5
Жыл бұрын
Spoiler is from ikon motorsports, radio is the Awesafe head unit on Amazon.
@fatbxitoocxld7685
Жыл бұрын
Man we need a full vid on the header alone yall skip the hard part lol them oem headers are pain
@npvfa5
Жыл бұрын
I agree the oem headers are a pain, I already removed mine many times so going deep into the process wouldn’t have been very useful since I already have some of the oem parts removed like the heat shield. There’s lots of other videos on how to remove the header, but I will say that you do NOT have to lower the subframe.
@jacksonkhenyarath9167
Жыл бұрын
I’m in the process of doing the alpha header with full race and OMG I didn’t think it would be this hard. Still not done and going on 3 days lol. Question tho, did you use the bracket that’s supplied with header? Is it necessary?
@npvfa5
Жыл бұрын
I honestly have no idea what the bracket is for 😂 . It’s not necessary. What’s causing you the issue with getting it together? If it’s your first time it’s definitely quite a process.
@jacksonkhenyarath9167
Жыл бұрын
@@npvfa5 yep my first time. Getting the oem out was a pain but got it done. I’ve only got two jack stands also lol but lining up the test pipe with the flange and trying to bolt it up underneath was hard enough I ended up calling it a day after like 5 hours.
@jacksonkhenyarath9167
Жыл бұрын
@@npvfa5 I also found that my o2 sensor won’t reach so now I’m waiting on an extension and a brand new o2 since I destroyed mine getting it out😂
@certifiedkekz1481
Ай бұрын
Bro I added a exhaust header and intake all from skunk2 but after my shifter was so stiff my gears didn’t even wanna go in really I wanted to ask if you know what could be wrong
@npvfa5
Ай бұрын
The skunk2 radiator hose is probably hitting your gear selector. I had that issue too, all you have to do is rotate the hose a little.
@AbelNutu
Жыл бұрын
yo what headlights are those, whole build looks so good
@npvfa5
Жыл бұрын
Headlights are from LightCreationz.
@kubav4936
10 ай бұрын
Probably a dummy question, i have a stock civic si coupe, if i will buy the skunk header, do i have to get any extensions for it to work without the catylic converter and the rest of the stock exhaust? or is it good to go after just replacing the header?
@npvfa5
10 ай бұрын
The s2 header replaces the stock header and cat. If you buy one it should come with the o2 sensor extension already.
@kubav4936
10 ай бұрын
@@npvfa5 appreciate the help :D
@Cake_Eater
Жыл бұрын
Is your Hasport 62a rear mount still holding up with this beefy setup? I'm debating between the 62a and 70a for my Alpha + Full Race
@npvfa5
Жыл бұрын
Yeah it’s holding up, my header doesn’t hit the subframe, but there still is some wheel hop. I recommend getting the upper torque mount as well. That will be one of my next upgrades
@vpyro
7 ай бұрын
Hey bro! What bolts did you use to replace spring bolts
@gregbaca6164
3 ай бұрын
What's your wheel and tire set up?
@dav31078
6 ай бұрын
Do you have any drone under load now with this setup and the intake? Mine is pretty bad.
@npvfa5
6 ай бұрын
No I have almost no drone at all, I’d make sure you don’t have any of the exhaust hitting the frame of the car.
@Si__Jay
Жыл бұрын
would you recommend taking it to a shop to get these 2 installed or is it super easy to do yourself
@npvfa5
Жыл бұрын
You can do it yourself if you have some mechanic experience. If you’ve never done work on your car I recommend going to a shop or a friend who does.
@The_ever
3 ай бұрын
Hey bro where did you get the adapter
@npvfa5
3 ай бұрын
The adapter comes with the header (if you buy it new). But I think Skunk2 also sells the adapter separately
@asaellopez1036
Жыл бұрын
did you get the full race exhaust with a stock header outlet or race header outlet ?
@npvfa5
Жыл бұрын
This version has the 3 inch inlet so it will only work with a race header. If you want to use the stock header make sure you get the one with a smaller inlet
@the_dark_elite
Жыл бұрын
Yo how is the cold start in the morning is it loud? I'm not trying to get a noise complaint from a neighbor or pulled over by the cops?
@npvfa5
Жыл бұрын
If you have a header then cold starts are definitely gonna be louder than stock, but not enough to get in trouble or have neighbors mad. I have a friend with just the full race exhaust and cold starts sound the exact same as stock.
@HERYXZ
6 ай бұрын
Hello! I have a question. The header skunk2 alpha the outlet is 2.5 and the full race have 3” inlet? This match perfectly like plug and play? Cause in the website of the full race have 2 option 2.5 and 3” inlet :( Anyone can help me?
@npvfa5
6 ай бұрын
Hello, so if you want to run your exhaust with the stock header you will need the 2.5 inch inlet on the exhaust. If you’re only ever gonna use the exhaust with the skunk 2 header then the 3 inch will bolt up perfectly.
@HERYXZ
6 ай бұрын
@@npvfa5 Hello Nick, Yes. I have the skunk2 A. If i buy the full race 3" inlet this fit with the skunk2 A header? right? Thanks for your reply.
@carlosgutierrez9941
3 ай бұрын
Where did you get the adapter bro?
@npvfa5
3 ай бұрын
Came with the header, but I think you can buy it separately from skunk2
@andraepusey7857
5 ай бұрын
Where did you get devsport lips
@npvfa5
4 ай бұрын
From the devsport website, took a while to come, but that was during covid
@christianvillegas9686
Жыл бұрын
Did you plug in your o2 sensor on the secondary hole or the first one?
@npvfa5
Жыл бұрын
Plug the primary o2 sensor in the second hole, so that it reads from all cylinders.
@Taoka-
Жыл бұрын
Did you upgrade the back mount or is the stock one fine ?
@yukonstriker1703
3 ай бұрын
You need a Hasport 62a rear mount at minimum
@GlassDonkey
Жыл бұрын
Did you use the donut gasket that the headers come with?
@npvfa5
Жыл бұрын
Yeah I used the provided donut gasket. I heard some people use the s2k donut gasket but this one didn’t leak so I didn’t see a purpose in getting a different one.
@jaysonmendoza3481
11 ай бұрын
Which head unit is that? Does it work with the steering control and no low noise due to the amplifier the SI has?
@npvfa5
10 ай бұрын
There's a video of it on my channel. It works with steering controls and there is slight static noise when nothing is playing but i can live with it.
@micahdollente6071
6 ай бұрын
Is the car Catless now?
@npvfa5
6 ай бұрын
Yes this header gets rid of the cat
@SergioSanchez-wd1nc
8 ай бұрын
What do you have to do when you get state ref?
@npvfa5
8 ай бұрын
The state ref does a full inspection of your cars emission system. Essentially, your engine needs to be completely stock to pass and have your car street legal again.
@fc3dallyboy5
Жыл бұрын
What basemap did you use to flash the car?
@npvfa5
Жыл бұрын
I have a custom tune, but any of the maps theoretically should work fine.
@831CaliSavage
Жыл бұрын
Do you get a check engine light with the headers?
@npvfa5
Жыл бұрын
No, most headers, including this one, come with a defouler for the secondary O2 sensor so you won’t get a CEL. If you have Hondata you can disable the second O2 sensor as well.
@831CaliSavage
Жыл бұрын
@@npvfa5 okay 👍🏽 I had one last question I bought some skunk 2 alpha headers for my Fa5 do I need to tune my car if I want to keep them on ?
@certifiedkekz1481
Жыл бұрын
What head lights are those bro
@npvfa5
Жыл бұрын
Retrofits from LightCreationz
@camronsmith355
Жыл бұрын
What wheels are those ?
@npvfa5
Жыл бұрын
Aodhan DS02
@951rollincivicsi
Жыл бұрын
Want to sell your stock parts?
@abbywilliams3076
Жыл бұрын
Are you from sac bro?
@npvfa5
Жыл бұрын
Modesto
@abbywilliams3076
Жыл бұрын
Oh ok did you get the exhaust from sac?
@thomasthurston6656
Жыл бұрын
@Nick Panyanouvong didn't think it looked much like LA lol.😅
Пікірлер: 99