Polybutadiene based Elastic Sealant SKYSEAL F-2,
which has less slumping feature, made of 3 materials
to be mixed.
For the best performance, mixing order and adequate
mixing time are important.
Watch this movie carefully and follow the instructions.
◆Mixing to application procedure
1.Pour Hardener into Main component.
2.Mix well for one minute.
3.Add Additive
4.Mix well for one minute
Collect material on the wall of the container.
6. Wait for 15 minutes.
7. Use Caulking gun for application work.
8. Clean the surface of substrate. Apply designated primer.
9. Apply masking.
10. Take off excess material by spatula etc.
11.Dispose excess material adequately.
・SKYSEAL F-2 Introduction movie
• スカイシールF-2
・Danichi Chemical Co., Ltd. Office Webpage
www.dainichika...
・SKYSEAL F-2 introduction page
www.dainichika...
Негізгі бет SKYSEAL F-2 / Handling manual - Polybutadiene based Elastic sealant with less slumping feature.
Пікірлер