Nice bit of kit I look forward to seeing it used to cover a full flight as will I need one shortly.
@ArxangelRC
3 жыл бұрын
Has done so many times now, though not using the built in DVR, I removed that and threw it in the trash a long time ago!
@imemyself2820
6 жыл бұрын
Ah I need to subscribe. Your videos keep coming up on every search I do on KZitem! :)
@ArxangelRC
6 жыл бұрын
Hahahaha, thanks mate! That is good news! :)
@wayneshephard
7 жыл бұрын
Very good review and pertinent info, thankyou for taking the time to do a good review.
@ArxangelRC
7 жыл бұрын
Thank you! :)
@Koestel-FPV
7 жыл бұрын
i use skyzone, this product is very good!
@ArxangelRC
7 жыл бұрын
Do you have the same monitor?
@Koestel-FPV
7 жыл бұрын
No, i use the skyzone 700d
@ArxangelRC
7 жыл бұрын
OK, that one should be good too. Specs look good. :)
@lobodrones3502
4 жыл бұрын
How do you charge the battery? My SkyZone HD02 Finally arrived today. Was very excited but then I see there is no charger. They provided some wire called a XT60 connector but don't know what I need to buy to connect to this. The 1 page 'manual' doesn't talk about how to charge at all.
@ArxangelRC
4 жыл бұрын
Well no 220v charger, yes! You need to plug a 3S Lipo in that XT60 cable, and it will charge the monitor!
@jamesshippIII
7 жыл бұрын
At about 4:50 into the video you mention having an extra battery available. Do you have a link for the purchase of the extra battery? Also the xt60 connector... how is that used to keep power to the monitor? Thanks for such a great video presentation! Oh one last question...with this monitor, I should be able to use my android table as my primary monitor for my phantom 4 quadcopter, and mirror from it to the Skyzone monitor as a secondary monitor correct?
@ArxangelRC
7 жыл бұрын
The battery used to power/charge the monitor can be any 3S battery, preferably over 2200mAh capacity to make sure you have enough for at least an hour or two! The monitor comes with a charge/power cable that has an XT60 connector pre-installed, so you have to make sure the 3S battery you would be using also has that one on it. As for the Phantom 4, IF you have the HDMI module on the Phantom radio, you can connect and HDMI cable between the radio and this monitor, and you would be able to see the video on the Skyzone, but only the video, it will not show you the OSD overlay you see on your tablet.
@jamesshippIII
7 жыл бұрын
great ....also at the 0:43 mark in the video it mentions that a 2s 2200mah battery comes with the monitor. Are you saying that a 3s battery can be substituted for use with the XT60 connector? If so does the mah rating matter...could a 3s 5200 mah battery be used?
@ArxangelRC
7 жыл бұрын
There is a battery that goes IN the monitor, it plugs at the back and can stay there at all times. In addition you can plug in an external battery to charger the internal one when it is depleted, but in order for you to actually charge it, you would need a higher voltage source, hence why you need a 3S LiPo. Capacity doesn't matter as long as the voltage is 3S. A 5200mAh pack would be able to keep the monitor running for a longer time.
@ToddtheLoneDroner
4 жыл бұрын
Thanks a lot dude I just bought it
@ArxangelRC
4 жыл бұрын
Cool, hope you like it!
@ahatoni
5 жыл бұрын
Hi my Angel! Would you know, is there an up-to-date version by now, this vid was over 2 years ago? E.g. with external input recording feature etc? Thanks for your great work, just buying some stuff again via your links :) Regards Mike What was your name again?
@ArxangelRC
5 жыл бұрын
Hi, it is Nikola! And sadly no... have not seen an updated version... which is why I opened it, removed the built in DVR, because it was crap, and mounted one of those Eachine D100... if I remember the name right, DVRs, and it is working pretty sweet now! The monitor itself, as a screen and brightness, is absolutely top notch!
@mikeb6836
5 жыл бұрын
ArxangelRC Hi Nicola ! thank You for Your fast Response ! I Will get one of those DVD-Rs as well then do you remember where you got it from? Thanks Mike
@ArxangelRC
4 жыл бұрын
The DVR is the EV100D DVR... got it from Banggood!
@mikeb6836
4 жыл бұрын
Dankeschön Nokola!
@mikeb6836
4 жыл бұрын
ArxangelRC Nikola😂👍
@righty0184
5 жыл бұрын
Good video and info. I have brought the screen and the eachine TX801 but how do you install the eachine TX801? Be great if you can please
@ArxangelRC
4 жыл бұрын
I have a wire from the video output coming to the Vtx, and then just 12v from the 3S pack to power it! Very simple setup!
@avsaase
4 жыл бұрын
Nice review. I just got this monitor. Is it correct that it cannot record DVR in 16:9 format, only 4:3? Thanks.
@ArxangelRC
4 жыл бұрын
The video coming in is always 4:3... the 16:9 recording option either stretches that 4:3 image to get it to 16:9, or crops the top and bottom of the 4:3 and zooms in to get it to 16:9! All analogue DVRs do that!
@robinvanlooy294
3 жыл бұрын
Is there another way you can charge the monitor instead of an external lipo battery??
@ArxangelRC
3 жыл бұрын
Anything that can supply 12v DC to the charging cable!
@robinvanlooy294
3 жыл бұрын
@@ArxangelRC and how much current should the supply deliver?
@ArxangelRC
3 жыл бұрын
@@robinvanlooy294 I think if you are using a power supply, 1.5A or 2A would be ideal! While also charging the built in battery I've seen it pull around 1.2-1.3A, so if not using a battery for this, better make the power supply around 2A at least for piece of mind!
@robinvanlooy294
3 жыл бұрын
@@ArxangelRC Thank You very much for the reply! In the field it is convenient to charge the monitor with a portable battery, but when you are at home it is easier to just use an adapter🙂
@ArxangelRC
3 жыл бұрын
@@robinvanlooy294 I never charge anything at home, other than flight batteries!
@NerdyFpv
4 жыл бұрын
I'm a bit late to the party here.. Lol. Have you tried this with directional antennas on the monitor itself? What range could I expect with some decent antennas? Btw, what antenna is on your tracker? :) Cheers!
@ArxangelRC
4 жыл бұрын
This is the antenna I use on the tracker now: bit.ly/Triple-Feed-Array Have tried it with directional antennas, but it works well as long as the antenna is well pointed... hence why I always revert back to the tracker! Much more convenient!
@JakeBullit123
7 жыл бұрын
looks good quality.what is your accent BTW?
@ArxangelRC
7 жыл бұрын
I am from Bulgaria... but not sure if I have the typical Bulgarian accent. I spend a number of years studying in the UK. :)
@JakeBullit123
7 жыл бұрын
ArxangelRC well whatever the accent,reviews are always well presented.
@ArxangelRC
7 жыл бұрын
Thank you Jake! Much appreciated. :)
@robinvanlooy294
3 жыл бұрын
Hi, Do you know the name of the charging plug?
@ArxangelRC
3 жыл бұрын
Not really! Its a pretty standard one... I would guess 2.1mm model, but I have no idea what its called!
@robinvanlooy294
3 жыл бұрын
@@ArxangelRC I have just bought an adapter, its called 3,5/1,35. It works perfectly. Thank you for your help! Love your videos
@ArxangelRC
3 жыл бұрын
@@robinvanlooy294 Thanks mate, glad you sorted it out! :) Good luck!
@J.D.Vision
4 жыл бұрын
Have you been able to find a new FPV monitor in 2019 - 2020? It seems like everyone stopped making quality monitors.
@ArxangelRC
4 жыл бұрын
Not really... and recently I started using this one again... and it is QUITE good... so haven't really looked for anything else really!
@SladkaPritomnost
4 жыл бұрын
Sad, I prefer monitors over googles, so that I can have control over the area I fly in. About a month ago I bought FPV720 feel world www.feelworld.cn/ShowClass.aspx?id=30&py=FPV-Monitor but I'm disappointed. It's listed as 1024x600 (and it really can be, lcd seems capable) but FW drives it as if 800x480 ;( However it's very nice bright, colorful, compact looking, lightweight, I can see it simply misses details as 1024x600 can do.
@명탐정코난-h1e
5 жыл бұрын
Thank you for the information. Let me ask you two questions. I bought Sky Johnhd20 too, and I would appreciate it if you could tell me what adapter I need to charge my battery. second question Skyzone hd20 micro sd card is supported, but I have a small card and I need to know how to use it.
@ArxangelRC
5 жыл бұрын
Hi, the monitor has a MicroSD card slot, should fit in there! As for the power... didn't you get a power cable with it?
@avsaase
2 жыл бұрын
It's a decent screen but the UI is terrible. I cannot get it to keep recording when going back to the diversity display. I also often get stuck in the strange button sequences. Any suggestions?
@ArxangelRC
2 жыл бұрын
Yes, I removed the integrated DVR and am using an external one! As for switching between the modes, when you get to the HDMI one... I think, you need to switch out of it using the menu button... if I am not mistaken, then you keep switching using the regular one.
@avsaase
2 жыл бұрын
Do you still have this monitor? I misplaced the XT-60 to barrel plug cable. If you still have it, can you tell me which barrel plug it is, and what the polarity is? Thanks!
@avsaase
2 жыл бұрын
Never mind, found it!
@ArxangelRC
2 жыл бұрын
Yes, I do still have and use it! Plug is standard - inside is positive, outer side is negative! :)
@RCWilliam123
4 жыл бұрын
Hi, how to turn off the OSD??? No word in the video, nor in the manual...
@ArxangelRC
4 жыл бұрын
No idea at this time!
@AdrianoCasemiro
5 жыл бұрын
All tests performed on the rubber duckies?
@ArxangelRC
5 жыл бұрын
Yes, or connected a cable from my antenna tracker.
@Cyba_IT
2 жыл бұрын
His plane seemed to be stalling a lot :p
@ArxangelRC
2 жыл бұрын
Seemed? Based on what?
@ArclampSDR
2 жыл бұрын
could we have an updated link?
@ArxangelRC
2 жыл бұрын
Sadly it seems to no longer be on sale anywhere now...
@robinvanlooy294
3 жыл бұрын
Is this monitor better than the Eachine LCD5802D?
@ArxangelRC
3 жыл бұрын
I don't have the Eachine one, so can't really comment, but I do like it a lot, and the screen is bright enough to see well in the sun!
@robinvanlooy294
3 жыл бұрын
@@ArxangelRC I have another question. I read that someone had a problem with the green battery indication of the monitor, it apparently blocks the OSD of the flight controller, is this solvabel? Is there and updated version of this monitor? Because yours has silver control buttons and in newer reviews it has black control buttons. On the picture on Banggood it still has silver buttons but on the photos of reviews it has black buttons
@ArxangelRC
3 жыл бұрын
@@robinvanlooy294 I don't know if there is an updated version of the monitor, and yes, some of the monitor's info icons can be on top of the OSD... but I don't really mind it... I like seeing the monitor's information as well. No idea why they would change the button colour only... mine is a few years old now... not sure if they'd make any changes to the firmware or menu options... but the DVR on mine turned out to be crap, so now I am using an external one!
@robinvanlooy294
3 жыл бұрын
Which antennas do you recommend for this monitor? For long range and medium range?
@ArxangelRC
3 жыл бұрын
@@robinvanlooy294 Well... I've rarely used it on its own for long range, because you would have to keep adjusting that antenna to point at the plane, and is not very convenient, so I mainly use it with my antenna tracker, since I have a 5.8Ghz wireless relay from it, so doesn't really matter what antenna I put on there, for a distance of 1-2 meters it doesn't really matter! But if you don't have an antenna tracker... I'd reckon these two should make a good pair: bit.ly/Triple-Feed-Array and www.banggood.com/custlink/mKDE86ACAe with the latter being a bit less directional than the former.
@umeshjadhav3326
3 жыл бұрын
Wt would u recommend, if someone wants to buy decent fpv monitor in 2020? Sky zone hdo2 is great, any other than that..........
@ArxangelRC
3 жыл бұрын
Actually I have not looked much into monitors lately, so no idea if there is something new out there... can't say that I've seen anything, but I still use this one, and I am very happy with it! Only thing is I moved to an external DVR, because the built in one was crap!
@subzero674
5 жыл бұрын
I bought one of these monitors. It came with a few seconds of video recorded to some internal memory, and when I tried to use it in the field, it recorded one 2-second video and one 11-second video to its internal memory. But I cannot make it record to the Micro SD card. It appears the internal memory is full, and now whenever I try to record, it gives me a message of Card Full. It get this message whether there is a Micro SD card inserted or not. It appears the HD02 does not recognize the Micro SD care when I insert it. How do I make it see the Micro SD card? How do I make it record to the Micro SD card? How can I delete videos from the internal memory? Is the card reader broken? Thanks for you help!
@ArxangelRC
5 жыл бұрын
Actually I never did figure out how to work that integrated memory, and I did have some issues with it seeing the memory card every time... sometimes it would work OK, other times it will not see it! I have no idea why this happens... what files system is the SD card formatted in?
@subzero674
5 жыл бұрын
@@ArxangelRC I tried Fat32, exFAT and NTSF, and tried several Micro SD cards. Nothing worked. Banggood says they will send me a new monitor. We'll see what happens with that.
@ArxangelRC
5 жыл бұрын
Well... I hope the new one works better... at some point I was considering removing the DVR module from the monitor altogether and just wiring in an external DVR!
@fwa3387
7 жыл бұрын
I just purchased this LCD screen from HobbyKing. The fully charged battery died after 20 mins while i attempted to record video from HDMI input and 5.8ghz transmitter. This unit will NOT.. I repeat WILL NOT record to my micro SD card. Hopefully Hobby King will replace this piece of junk with a fully functioning monitor.
@ArxangelRC
7 жыл бұрын
Some people did report the battery lasting shorter periods of time, but in my unit the battery lasts at least 30-40 mins when working. As for recording from the HDMI input... does it really do that? I have not been able to record from the AV in... can it really record from the HDMI in?
@leon8144
6 жыл бұрын
I want to buy a 2.4ghz fpv transmitter but can't find any monitor(receiver) that has 2.4ghz antennas, Can you just change the 5.8ghz antennas on the monitor to 2.4ghz? Do that work?
@ArxangelRC
6 жыл бұрын
Yeah, I haven't heard of a monitor with a 2.4Ghz video receiver in it! Just replacing the antennas will not work, the electronics in there are still designed to operate on 5.8ghz. You can buy a monitor and a 2.4Ghz receiver separately!
@WAGODOY
7 жыл бұрын
Hi, I have one of this Monitor, and mine record videos of 4 minutes each one, I see you video and may be the yours video is more than 4 minutes correct ?
@ArxangelRC
7 жыл бұрын
The DVR records the video in 5 min segments. That is pretty standard with some of these electronics. I don't really mind it.
@ArxangelRC
7 жыл бұрын
The DVR records the video in 5 min segments. That is pretty standard with some of these electronics. I don't really mind it.
@WAGODOY
7 жыл бұрын
Hi, my videos sometimes recorded darker, it is possible to lighten the video recorded ? Thanks Man, Help me a Lot !!!!.
@ArxangelRC
7 жыл бұрын
I have this effect on my older DVR, but I think it may have something to do with the wiring, or the camera on-board the plane! Check your wiring for some loose GND connections for instance. When I move my wires around sometimes it is fixed... sometimes it is not!
@Caimansa
4 жыл бұрын
What is quadcoptet on 1:41?? Its cool.
@ArxangelRC
4 жыл бұрын
Something that no longer lives... and I don't think it is sold anymore! Quite old! Don't even remember the name now...
@dmitriyp7701
6 жыл бұрын
Hi Arxangel, how can I record a video from AV input channel? I just see a realtime video and nothing. The display doesnt record video on a sdcard.
@ArxangelRC
6 жыл бұрын
Sadly you can't record the video from the AV input! :( Not sure why they didn't enable that functionality... shouldn't have been difficult!
@WAGODOY
7 жыл бұрын
A Question, can I change the antenna with Skyzone on? Thanks a Lot !!!!
@ArxangelRC
7 жыл бұрын
Yes, that shouldn't be a problem. Can't do it on a transmitter though.
@brianescalanteaguilera7463
6 жыл бұрын
Is this SCREEN works for the FPV BUILT IN signal from a MJX BUGS 2W DRONE?
@ArxangelRC
6 жыл бұрын
No, that drone has a WiFi signal, which means you connect your phone to it and streams the video there. It is a digital link. This monitor works only with analogue video signals.
@skarebsuper
7 жыл бұрын
can i feed HDMI signal to the monitor and output the video from the screen to another device via the AV cables?
@ArxangelRC
7 жыл бұрын
Actually I am not entirely sure about this, haven't tested it, but if I had to take a guess... I would say that there is a chance it may not work that way.
@skarebsuper
7 жыл бұрын
i just ordered this monitor, i will try it out if it works or not when it arrives, was hoping to receive hdmi video feed to the monitor, and yet tap on the same feed to my goggles at the same time.
@ArxangelRC
7 жыл бұрын
I get the idea, I hope it works, might try it out at some point! Let me know when you do. :)
@SladkaPritomnost
4 жыл бұрын
Hi, does the monitor have matte foil? I cannot tell from the video.
@ArxangelRC
4 жыл бұрын
It is not a foil... the monitor's top layer it just matte, looks good in the sun!
@garyscott5158
7 жыл бұрын
Does the monitor have an image flip setting in the menu? I'd like to mirror my image.
@ArxangelRC
7 жыл бұрын
Sadly I am not seeing such an option in the menu! :(
@Donjanseneda
6 жыл бұрын
Is this compatible for SJRC S70W with action cam mod
@ArxangelRC
6 жыл бұрын
It would depend on whether that action cam mod also includes an analogue video transmitter! If yes, then this should be compatible with that transmitter.
@rrn5112
7 жыл бұрын
Question : Can you also use this monitor with the Hubsan H301S SPY HAWK 5.8G FPV 4CH RC vliegtuig RTF ? I bought the Eachine Google Two with raceband ,but have no Picture at all . only flics I am starter FPV and like your videos. Need some help/tips
@ArxangelRC
7 жыл бұрын
Do you let the goggles auto scan the channels after powering up the plane? You should be able to pick up the signal with a 40 channel receiver, even more so with a 48ch one. :)
@rrn5112
7 жыл бұрын
Yes I have scan after powering the plane. I have this Google : www.banggood.com/Eachine-Goggles-Two-5-Inches-5_8G-40CH-Raceband-HD-1080p-HDMI-FPV-Goggles-Video-Glasses-p-1094862.html?rmmds=myorder With 40 Channels : Frequentietabel Frequentie Band A 5865 5845 5825 5805 5785 5765 5745 5725 Frequentie Band B 5733 5752 5771 5790 5809 5828 5847 5866 Frequentie Band E 5705 5685 5665 5645 5885 5905 5925 5945 Frequentie Band F 5740 5760 5780 5800 5820 5840 5860 5880 Frequentie Band R 5658 5695 5732 5769 5806 5843 5880 5917 Witch Cannel send the Habsan H301S Spy Hawk ? Is this possible /Working with Eachine google 2 ? I have only on mine Transmitter Tx a Picture untill 10 meters , when i flying it is gone after 10 m. away. There is only OSD information on my Tx monitor. Is a new plane I have from Banggood 2 weeks ago. Do you knows what is maybe the problem.? I have shack insite the plane for some isolations.
@ArxangelRC
7 жыл бұрын
The Hubsan should be working in the A band in the above table. It is possible the goggles are not on the right frequency. Sometimes they would pick up a valid signal on the wrong frequency that is close to the correct one, and will show the video, but the signal will degrade very quickly. Scan with your goggles until they find a channel in the A band!
@rrn5112
7 жыл бұрын
Arx , thanks for your help. I have try over a half hour . But Eachine Goggles Two picture is a Horizontal flickering picture , very light picture. with 5x OSD ; 1080 FHD in a row horizontal flicks Is someware a Forum over ; Problem with Hubsan
@ArxangelRC
7 жыл бұрын
Hm, that is weird! Have you tried the goggles with something else? Is it possible the goggles are not working? Can you see the video feed from the plane on the original Hubsan remote? Here is the Hubsan thread over on RCGroups: www.rcgroups.com/forums/showthread.php?2516703-Hubsan-H301S-Spy-Hawk-RTF-FPV-full-review-owner-s-thread%21 There is also a dedicated Hubsan forum if I remember correctly, but I am not sure what it was called... I guess you can try and find it out.
@taqyon
7 жыл бұрын
Too bad about not recording AV in!
@ArxangelRC
7 жыл бұрын
Yeah, I am bummed about this, BUT... waiting for the 0.01mW Vtx to make a relay system, and I should be good from there on! :)
@taqyon
7 жыл бұрын
ArxangelRC yea I mostly use relay, but 800mw :)
@ArxangelRC
7 жыл бұрын
That seems like an overkill! I actually want to use 5.8Ghz for relay, and I fly with 5.8Ghz as well, hence why I need the low output! I will do a directional antenna to make sure it does not interfere with the receiver on the tracker.
@taqyon
7 жыл бұрын
ArxangelRC 800mw allows me to place the antenna on a hill and sit in my car while flying. I now understand why you need such low power! You can also go left hand polorisation on the relay, while flying right hand.
@ArxangelRC
7 жыл бұрын
Yes, that was my idea. The relay will have LHCP, and I now fly using either linear or RHCP, so I should be good and not suffer any interference! :) At least I am hoping for that.
@jamesceastep8874
7 жыл бұрын
What is the saved video format? AVI, MOV or MP4?
@ArxangelRC
7 жыл бұрын
The monitor saves the files in the AVI format.
@xavier_arthur
7 жыл бұрын
What value determines how clear a monitor will display?
@ArxangelRC
7 жыл бұрын
Well... for one the signal that is being received, the screen resolution all has a lot to do with it, and the screen cover as well... and the quality of the screen itself!
@tonysiu8562
6 жыл бұрын
I use runcam swift micro 2 + TBS unify 5V with this display the latency is around 0.1 second. seems it is pretty high. Any one have this experience?
@ArxangelRC
6 жыл бұрын
Yes, I have noticed a delay with the monitor! Better to use goggles for racing.
@Chris-vc1dh
Жыл бұрын
hi is this skyzone monitor still good these days?
@ArxangelRC
Жыл бұрын
Well... I still use it and I like it, minus the DVR bit, that crapped out years ago. Everything else has been stellar, even the battery is still good! If you can find it, I suppose it is still a valid option! I have not seen much new done in monitors since goggles have been the main focus over the past few years anyway!
@Chris-vc1dh
Жыл бұрын
@@ArxangelRC I am making ground station with a fieldview monitor used for cameras and external DVR much better picture
@ArxangelRC
Жыл бұрын
@@Chris-vc1dh Compared to the Skyzone?
@Chris-vc1dh
Жыл бұрын
@@ArxangelRC yes, such monitors are super bright and sharp
@ArxangelRC
Жыл бұрын
@@Chris-vc1dh Good to know! Weren't they also more expensive?
@declouxa
7 жыл бұрын
I have the same screen but I dont have a place to put memory card, how does dvr work ?
@ArxangelRC
7 жыл бұрын
On the right side of the screen, just above the power port should be the SD card slot!
@declouxa
7 жыл бұрын
my micro sd literally FELL into the device it was too small, what size card is this ?
@ArxangelRC
7 жыл бұрын
Should accept a Micro SD card! There is a chance you may not have an SD slot... even though the opening is there! Or you just inserted it a bit at an angle and it missed the brace.
@declouxa
7 жыл бұрын
it seems like there is nothing to actually accept the micro SD, what happened ? it was advertised with built in DVR, how the heck am I supposed to record now ?? lol, thanks for the help ArxangelRC
@ArxangelRC
7 жыл бұрын
Damn! And you bought this exact model? Where did you get it from? Somebody did mention some fake ones out there, I wonder if you happened to get one of them! Best course would be to contact whoever you got it from and tell them what is happening.
@hanguiyoung9200
6 жыл бұрын
Does it support HDMI output?
@ArxangelRC
6 жыл бұрын
Sadly no! :( Only an input.
@AnasSuhaimi
3 жыл бұрын
@@ArxangelRC Thanks, man.
@SirChickenMcNuggetTheThird
4 жыл бұрын
1:44 what,lol, so Tiny!!!
@ArxangelRC
4 жыл бұрын
Hahaha, yeah... it was!
@dipcharanbarman1942
Жыл бұрын
Prayer for money.
@ArxangelRC
Жыл бұрын
Not sure I understand...
@RCWilliam123
4 жыл бұрын
I bought a HD02 monitor. How can I turn off the OSD??? The green OSD letters from the skyzone HD02 are covering the letters from my flight controller OSD, it is impossible to read the osd from my FC behind the HD02 OSD letters. In the menu there is a option called "OsdDuration", but that doesnt change anything. If its not possible to turn the OSD off, then this monitor is not worth a penny. DO NOT BUY SKYZONE HD02 UNTIL THIS PROBLEM IS SOLVED!!!
@ArxangelRC
4 жыл бұрын
Well... you are correct... it is a bit annoying from time to time, but I have not found it to be that big of an issue... hence I've never looked into switching it off! Still think the screen is awesome, and the battery is good too!
Пікірлер: 152