Very useful, thanks. I'm having to sort out a set of doors where the door opening height was way oversized and am going to have to fit a 40 mm timber base-plate to refit the existing doors which had been taken offas they would never have worked correctly. Thank you!
@CashForCarsRemovalPerth
9 жыл бұрын
Thank you for a pretty nice video tutorial.
@preethamdsouza8767
6 жыл бұрын
Nice easy installation fittings .wardrobe door is interesting .Are these called profile shutters?
@lotj7140
7 жыл бұрын
Thank you George well explained
@mishaelgrund354
8 жыл бұрын
This is a plan I couldn’t find in Woody Hyezmar’s Woodworking Bible. But there’s something very similar to it if you google his name, I still think you can download it for free.
@maccajim
5 жыл бұрын
Hi does the top need to go in first. I have 2 that have come of the tracks and are trying to put them back on. Thanks for any help
@MrJokerh61
5 жыл бұрын
Hi can you please tell me if you can buy new door locks main keeps coming off the track the blue locks are missing many thanks for any help..
@DownhillAllTheWay
5 жыл бұрын
I live in a new-built home (less than a year old), and I presume that the ceiling is plasterboard (though I may be wrong - without drilling into it, it's hard to know). You show putting up the top rail by simply screwing into the ceiling. Can I make a secure fitting by screwing directly into plasterboard? Should I use some sort of glue - such as "No more Nails"?
@MrGrasham1
5 жыл бұрын
Hi I can across your question and I'm in same boat as you. Have you built up the wardrobe yourself if so did u use no more nails or directly onto ceiling boards.?
@DownhillAllTheWay
5 жыл бұрын
@@MrGrasham1- Finally, I didn't need to attach anything to the ceiling. I ordered some sliding mirror doors from Amazon, and they came with a bit of internal structure, that stands on the floor. It's basically two chipboard verticals with chipboard shelves that go between them, and it stands to one side of the wardrobe, with space for a 4ft hanging rail to one side of it, and a 15" hanging rail on the other side. Its total width - about 15", and it doesn't reach the ceiling. The hanging rails attach to the structure at one end, and to the walls at the other end, and I just put a screw into the wall (plasterboard) with a plastic plug. If it doesn't last, I'll have to do something stronger, but at the moment, it seems OK.
@MrGrasham1
5 жыл бұрын
@@DownhillAllTheWay thank you sir, if its not too much of a bother can you send me product code for the sliding mirror doors you ordered please. Thanks in advance.
@DownhillAllTheWay
5 жыл бұрын
@@MrGrasham1 - The doors you order depend on the size of aperture they have to fill. For mine, the height of the ceiling was exactly what was required (226cm), and although the doors were a little wider than half the aperture, the overlap was only about 20cm, and that was OK for me. I used the SpacePro doors, ordered through Amazon. Have a look at ... www.amazon.co.uk/slp/sliding-mirror-door/xrddpjhub7v26y3 I used the two-door set. If your aperture is bigger, you may need 3 or 4 doors, but it all depends on the ceiling height being right. Check Ebay also. I saw several used mirror doors being offered at very good prices, but either they were wrong measurements, or they were for collection only and were too far away - but you might get lucky.
@MrGrasham1
5 жыл бұрын
@@DownhillAllTheWay Thanks very much for the link and information. God bless.
@bengreenwood1734
7 жыл бұрын
what do you do if your sliding door panel isn't wide enough to fit in the cupboard space?
@rocketrider1405
8 жыл бұрын
What size drill bit was used to drill the holes on the bottom rack and what size screws were used to place the upper track ?
@MaduraiWarrior
6 жыл бұрын
Rocket Rider I
@SP330Y
9 жыл бұрын
thanks for this video,it helped me with my installation immensley! My wardrobe doors dont fit exactly the opening i have there is a gap either side of about 140mm, how would you fill this gap so i dont see any screws from the front, so it finishes it off? Sort of like side panels fascia is what i am trying to fit either side and a top fascia which will screw onto the top batten to smarten it up but for the sides its just plain wall, any ideas please:
@bhadraprakash3893
2 жыл бұрын
What do you do if ceiling or floor are not level
@jb1995
8 жыл бұрын
Love it!
@2008Overkill
10 жыл бұрын
Can these be ordered online?
@annikal2782
3 жыл бұрын
Absolutely
@pokert9401
8 жыл бұрын
hello there, can i just take out my slidding door and measure it, then buy another one with the same measurement and just insert it? so i dont have to replace the whole parts, the up and down parts that hold the sliding door. or is there a problem to that? im trying to replace my wood sliding door to mirror sliding door.
@mbobole
10 жыл бұрын
hello there im mawuli from ghana please i would like t contact you for the sliding device? its urgent
@ahmedmohammed7355
6 жыл бұрын
which brand can i get in india
@JayaBarjaGroupteam
7 жыл бұрын
its good
@geegod9461
7 жыл бұрын
You can buy those sliding panels do it yourself shit from home base and b and q stores, and you can ask them to cut it to your desired size n measurements if you like, or sit down with there staff with your measurementd or they can come to your gates and install for you with there contractors
@MrAquinas1
7 жыл бұрын
Instead of using irritating music. How about providing useful commentary.
Пікірлер: 35