Great tutorial. But I found it works a lot better to use fingernail clippers to cut those small nubs off the sides. And a nail file to file them down flat. 👍🏾
@ggmbeanz7605
6 жыл бұрын
Man u cant u jus send ur adress and charge a fee n u do it n send it back. I gt adhd i aint gna be able to do this shit the way u explained
@916BriantheBarber
6 жыл бұрын
I rather do this to my Slim Line Pro Li than buy the Wireless Andis T-Outliner which cost like $150
@quisieboy4
4 жыл бұрын
Thts exactly what im bout to do! Buy a extra pair of slimlines and modify them!
@anthonyg_lifestyle2908
4 жыл бұрын
They sell the cordless t outliner for $90 over in rancho cordova
@916BriantheBarber
4 жыл бұрын
@@anthonyg_lifestyle2908 appreciate it but I tried them and I feel like they are weak
@vineelkrishna3500
4 жыл бұрын
@@anthonyg_lifestyle2908 Rancho where bro?
@robert420ism
3 жыл бұрын
I want to ask you something. I got my andis slimline pro li out the box and I started to make my 1st guideline with bulk thick hair. Started to cut and then blade just stop cutting like it dulled out. Motor spinning and blades moving. Is that possible that a blade can just dull out like that? Thank you.
@kikado3
3 жыл бұрын
No it shouldnt be halpening like that. Make sire the blade it tight on.
@MORTIFERO751
7 жыл бұрын
The Hair Tailor is a Master
@deeg1612
4 жыл бұрын
If he say “Ahh-right” one more damn time! Good tutorial tho.
@jjsiegal1
5 жыл бұрын
Bro...i can't hear NOTHING (EVEN with ear-buds in)
@azzz8992
6 жыл бұрын
Thank god I found ur youtube channel! I'm lefthanded and I prefer to learn from lefty's. I'm in my last year in barber school and not looking forward finishing yet .There is still a lot to learn. If you would like to chat or something , would love to show some of my work and see what you thing. Much love
@RFHlife
4 жыл бұрын
If i do this to my slimline does this make it better than gold fx skeleton? Can some one answer me plz thank you!
@kikado3
4 жыл бұрын
No the skeletons are way better.
@RFHlife
4 жыл бұрын
@@kikado3 thanks for answering me bro you the best i just sub
@RFHlife
4 жыл бұрын
@@kikado3 bro do gtx blade hit better than the skeleton fx?
@kikado3
4 жыл бұрын
Awesome thank you buddu
@frostminty
5 жыл бұрын
Hey i did that and my clippers when i turn them on they do this noise like something is clashing inside them and i try to cut hair and cuts nothing... do you know what is it?
@timfoot1548
Жыл бұрын
Is there any diffrence between the blackout blade compared to the normal version?
@dinky19810
6 жыл бұрын
Those clipper motor is gonna overwork cause of those heavy blades. Leave it alone.
@Maxedhemi
6 жыл бұрын
dinky19810 exactly I'm not doing to mine that is exactly what I said
@RyMuEntertainment
6 жыл бұрын
+dinkly19810 That's all I've been thinking from I first heard about this... Thanks for reminding me! lol
@2ndNatureHairSolutions
6 жыл бұрын
dinky19810 you're right, my first Li seemed solid, felt porwerful, and this new one i got seems weak, full charge and sounds "dull" if that makes sense. And i imagine with a heavier blade its all bad haha
@2ndNatureHairSolutions
6 жыл бұрын
dinky19810 actually, not really? How much heavier the the t blade bottom blade compared to the bottom blade from the original Li??? I bet its irrelevant, its the only part that moves. Your clipper is heavier, but thats irrelevant to the motor.
@ThePhokiss413
6 жыл бұрын
I got 3 pairs so i tried it and it works fine yall gotta remember the rotary motor is the most powerful of all the clipper motors turns your clipper to a cordless andis t outliner
@Goddess_chick
4 жыл бұрын
Aright
@ELEVOPR
4 жыл бұрын
You leave way to much for the imagination. When you do a how to, it's exactly that, How to. You should of showed before and after pictures of what the pieces looked like before drilling and before being shaved off. I can get it done, for these young guys that don't even have tools , there is just way to much stuff missing for them to get the whole picture. Thanks for your efforts anyways.
@kikado3
4 жыл бұрын
Agree with you. In order to do this correct I would of had to perform this perfectly while recording it. I had to do everything beforehand to make sure it works and by then either I throw the video together or buy another set of unmodified stuff to add for just video purposes and never use. I decided to save the money. I tried to put enough content with this situation so most people could perform the mod and in most cases people have done it successfully with this video. There’s no way I could of satisfied everyone given these circumstances so I will wholeheartedly agree with you. Cheers buddy
@ELEVOPR
4 жыл бұрын
@@kikado3 No Problem, Besides leaving a few things out, you did a great job. It was the not so handy going ones, I was worried about. At least you helped out others and that is very much appreciated. Thanks again for your work.
@MrMoekeene
5 жыл бұрын
Great tutorial I ordered the blades and completed the mod. Now I’m hyped to see how they work.
@apostlepaul8017
4 жыл бұрын
Did they work? And if so how did they cut?
@Bladewarrior-323
4 жыл бұрын
Two thumbs up!!! Thank you for the great tutorial
@kevlar1999
6 жыл бұрын
Some of the best tutorials by this man. Hopefully he comes again with some soon.
@aerickk7074
6 жыл бұрын
Ricardo the barber super fan tuyo desde Colombia America 💙👍
@adduneek
7 жыл бұрын
Yo Ricardo where you been bro? I will wait for you to drop a new video for long time!
@kikado3
7 жыл бұрын
Chillen with the kids brotha lol. Busy with the baby tho most of the time. I had a chance for a video today and took it
@adduneek
7 жыл бұрын
Ricardo The Barber well hopefully you find some time to drop some more dope haircut tutorial videos
@kikado3
7 жыл бұрын
Gonna try to film Sunday a low fade with long hair on top.
@demodemo9698
7 жыл бұрын
Great vid man
@adduneek
6 жыл бұрын
Ricardo The Barber what happen it's been about 5 months! Lol
@juniorcutthat
4 жыл бұрын
Is it supposed to be loud? Like louder than my wahl magic clips?
@kikado3
4 жыл бұрын
Spray them. If it doesnt change then yes they might be louder. I dont remember mine being that loud. Could be your blade placement
@EffDinero8
6 жыл бұрын
Too much work...
@sean5520
6 жыл бұрын
Yo Nail clippers and a metal Emery Board to modify the blade holder pimp.... Thanks for sharing this video Im going to go check out the rest of your videos now....And thanks for the Hair Tailor recommend I'm going to send some clippers out to him ASAP
@edwardwalden05
4 жыл бұрын
I can barely hear you
@desmondmitchell5602
4 жыл бұрын
Nobody say that bad boi like u say that bad boi lol
@kikado3
4 жыл бұрын
Ill take it lol
@desmondmitchell5602
4 жыл бұрын
I like listening to u its cool
@desmondmitchell5602
4 жыл бұрын
U from new York right for 100 buck I bet I'm right
@desmondmitchell5602
4 жыл бұрын
Oh yea u use the one minute sharper on the still blade
@anthonyharris5928
4 жыл бұрын
Too bad thehairtailor.com is out of business as of 11/11/2019. Any other suggestions?
@JBossDaBanger
7 жыл бұрын
Bad boy was used nineteen hundred and ninety-two times lol
@JBossDaBanger
7 жыл бұрын
And are u gonn make a video putting them to use
@kikado3
7 жыл бұрын
Yes soon. I just did them yesterday so I believe Sunday I'm filming
@JBossDaBanger
7 жыл бұрын
Ricardo The Barber cool...subscribing now
@straighthustlebullyz5315
3 жыл бұрын
I did the same modification to my trimmers and they don’t even cut they keep pulling hair
@juanarceo8436
5 жыл бұрын
Dope tutorial but today I was cutting and it made a weird noise so I checked my trimmers took then apart and the metal clip that holds the little black box it broke, what could i do???!!!!???!???
@p.r.r.8838
6 жыл бұрын
I appreciate the support and recognition brother. I have been watching your videos on KZitem even before I got started with custom products and supplies. 💈❤️💯
@kikado3
6 жыл бұрын
Just mentioned you on my newest vid. Keep up the great work man.
@juniorcutthat
4 жыл бұрын
Where did you get your blackout blade ?
@kikado3
4 жыл бұрын
couple years ago. loved it.
@patinderrick
5 жыл бұрын
Yoooo that blade is too sharp it seems should I just back off a little?????
@johnq6123
6 жыл бұрын
Has anyone modded them to use a SuperLiner blade? If it works LMK, I have a Slimline I wanna try to put an Andis In-Liner blade on. (4885).
@japoarg22
6 жыл бұрын
When im 0 gaping the top skrew moves the blade down again a little .i am.only.using the bottom little skrew to hold .what should i do
@patrickvigneault6761
5 жыл бұрын
Did it . and fkd up my slimline . Mosdef not worth . The motor isnt strong enough. I had to go back with the regular blade. And cutting the frame to make it skeleton is a bad idea as well.
@Ragg32
5 жыл бұрын
been running two of these skeleton and one with the blade mod for six months and working perfect!
@maksimmaksimov2975
5 жыл бұрын
Капец так режет слух твой олрайд. Что даже с середины видео включил ускорение, и смотрел без звука
@florencedieu8529
4 жыл бұрын
I try it . You have to file all the way to where the spring are that make it weak and the blade twist after a few use
@tyeekmason2
4 жыл бұрын
Where can I get this in NYC?! Hurry!!
@kriskallay8587
6 жыл бұрын
Those are some baaaaddddddd boyssssssss
@BlackWidowRazors
7 жыл бұрын
My Dude... How have you been? Hope the fam is doing wonderful...
@ao_drizzy9430
4 жыл бұрын
Used a gtx blade and ceramic cutter 👍👍👍
@queenatolliver5476
5 жыл бұрын
Probably a great video I just couldn't hear it well enough to watch it all the way through and yes my volume was all the way up.
@anthonyg_lifestyle2908
4 жыл бұрын
ill just buy a cordless t-ouliner 😐
@vasoullounge
Жыл бұрын
Nice My Guy
@quest808
4 жыл бұрын
My trimmers dont sound as strong as yours. If I tighten the blade down too much, it sounds like it’s struggling. If I loosen it, the blade starts to wiggle. Any advice?
@cnegron621
4 жыл бұрын
I have the same issue! Sometimes the trimmer won't turn on unless I loosen the screws. Another thing, the 2 top screws don't seem to align perfectly to the holes, they seem to go in a bit diagonal. Did u find any solutions?
@quest808
4 жыл бұрын
Cristian Negron 8:48 from this part on. Pay close attention on how he sets those screws. They need to be to sit flat. Make sure your holes are drilled correctly. At first and my screws weren’t set correctly so it was causing the trimmer to bog out. Every thing needs to sit flush. After making these adjustments, My trimmers work perfect, They hit hard, They are my finishers. Those 2 screws on the blade won’t look like they’ll screw in but that’s how it is. Just have to angle it a bit. Just check your setup again. Hope this helps 🤙🏾
@EnfernoMuzik
5 жыл бұрын
Screwed mine up.. the metal piece pooped out it never zero gapped
@pinoythomas77
4 жыл бұрын
Hey I noticed u didn't use the little metal spacer that comes with the t outliner blade. Does it matter?
@kikado3
4 жыл бұрын
it doesn’t no
@cobyjohnson8842
5 жыл бұрын
Man if u have to do all that u might as well just use the T outliner's
@Roycutsnfishes
7 жыл бұрын
Eehhrright! Glad to see you back bro. Will the weight of the tliner blade slug the motor much or no difference?
@kikado3
7 жыл бұрын
Yes but very minimal.
@angeldelgado3365
4 жыл бұрын
Where I can find that exact blades?
@samuelsantos7326
5 жыл бұрын
Como faço pra mim cortar a minha máquina e deixar igual a sua ?
@elmurph733
6 жыл бұрын
Thx. Good video. Just got it done. Can't wait to try them out.
@MORTIFERO751
7 жыл бұрын
Amazing Mod RiK..
@davidkavanaugh5400
6 жыл бұрын
How do you charge for the modification???
@kodee81
5 жыл бұрын
Great video I’m try it
@jimmyfranklin4781
5 жыл бұрын
Nothing crazy
@jboogie747
4 жыл бұрын
Good Job
@holidaystyles33
5 жыл бұрын
Followed to a T.......perfect!
@Ktoto841
5 жыл бұрын
Best of the best 💪 Like 👍
@carlosmanuel63
6 жыл бұрын
Thanks man!! I was stuck on drilling and making the holes bigger!!
@alvindarcie4697
6 жыл бұрын
Carlos Manúel that's a very good idea
@ericblends_u_up
6 жыл бұрын
Fire thanks
@willolden5657
6 жыл бұрын
Are those just regular blackout blades modified
@TruongBruce
6 жыл бұрын
Nice video
@brightlightent352
5 жыл бұрын
Now I can modify mine when I get them 😎
@marcthebarber239
4 жыл бұрын
Did it come out good for u?
@MoonLightGGA
6 жыл бұрын
Hi, do you know any trimmer with zero gapped and no need to any adjustments i can use it directly after opening the box? I dont want to do adjustments i want to use it directly. Thx
@yungjefehomes2870
6 жыл бұрын
Moon Light Yes get urself a Wahl Detailer with a T-Wide blade on it you can use them straight out the box and they are sharp
@nancydrew579
6 жыл бұрын
Modified my hitters , thanks !!
@cheesewesil18
7 жыл бұрын
Slimline are definitely one my favorite trimmers
@yungwaves1
7 жыл бұрын
nick horton do they hit right out the box
@cheesewesil18
7 жыл бұрын
sam o yeah I think they do pretty good but I got some tea outliners I don't hit for nothing
@Goddess_chick
4 жыл бұрын
Can someone do all the work and I'll just buy them lol
Пікірлер: 112