Hi greg, keep up the great work. You have helped me understand the basics of the key skills of civil engineering. Keep it up.
@SITENG
2 жыл бұрын
Thanks Jp! Happy to help :) Will be uploading the vids ones I sort my YT access. I am on holiday now and have difficulties. Lucky I can comment :)
@bhernonche
2 жыл бұрын
Excellent video! Looking forward to your next video with interview of engineers.
@SITENG
2 жыл бұрын
Thanks Bhernonche! I did not 'get them' when I was there, but definitely will try to speak with them, even if on line.
@georgea1116
Жыл бұрын
Great video mate. Loads of information. Cheers
@SITENG
Жыл бұрын
Thanks 👍
@Chris-ue6yz
2 жыл бұрын
nice to see greg
@SITENG
2 жыл бұрын
Thanks Chris!
@kevinkena9081
Жыл бұрын
100% perfect video
@SITENG
Жыл бұрын
Thank you Kevin!
@surveybook1468
2 жыл бұрын
Great Video 😀
@SITENG
2 жыл бұрын
Thank you Survey Book :)
@keerthanashaji3441
2 жыл бұрын
Wow..it’s interesting
@SITENG
2 жыл бұрын
Hi Keerthana, happy you like it, hope you will join the site soon 😊
@Onenesofallah
2 жыл бұрын
awsum one greg
@SITENG
2 жыл бұрын
Thank you! happy you like it😁
@mohammadafsar705
Жыл бұрын
Good work
@SITENG
Жыл бұрын
Thank you so much 😀
@mdafsara6363
Жыл бұрын
Good work sir
@SITENG
Жыл бұрын
Thanks
@josephhough211
2 жыл бұрын
Greg, how are you guys transferring datum’s up your cores for the slip? I’ve just been using steel tape for the jump form I’m on at the moment, only 7 levels so not massive. But interested to see how you do it for much taller elements. Seen some guys say these use vertical lazers.
@SITENG
2 жыл бұрын
Hi Joseph! It's a steel tape too, but also the lasers. Slipforms on the video using the laser and shows the level all the time. I did not the ones with the laser myself, but has to be nice 😁
@EdytaStepien
2 жыл бұрын
Another great video 😊 very interesting 😊👍
@SITENG
2 жыл бұрын
Thank you! Cheers Edi!
@isaiahsabljic1219
8 ай бұрын
This video is a huge help. thank you. Just a quick question.. are the jack rods encased into the concrete just like the reinforcement, or no? any help is appreciated :))
@SITENG
8 ай бұрын
Happy to help. Yes, they are 👍
@kylegreenwood3416
Жыл бұрын
Interesting video! I’ve ridden 50+ slips here in the USA and Canada. Same method, but very different equipment from what you do are using for elevator cores. Who do you rent the slip yokes, jacks, etc from?
@SITENG
Жыл бұрын
That job the company owns it (JRL Group). They prepare everything off site and assembly is really quick without 'long' carpentry works. How's working in Canada and US ?
@kylegreenwood3416
Жыл бұрын
@@SITENG we use a company called Scanada for jacking equipment and build wood forms on site. I enjoy working across North America. Lots of great people working together!
@abitonphiri9833
2 жыл бұрын
Hi Greg, could you please tell me what ( upstands) are.
@SITENG
2 жыл бұрын
Hi Abiton! the easiest way I would say it's 'small wall' few hundred mm high eg.150mm. It is used for example to 'hold' the screed and poured to the finish level height. Also used to sit something on top (windows etc) where you need structural concrete - in this case called plinths, plinth wall as well.
@EricHommeric
2 жыл бұрын
Good vlog , I worked once on the slipforms , not for me , I don’t like heights and tight places :)
@SITENG
2 жыл бұрын
Thanks Eric! Yeah slipform is very specific job and not for everyone. I don't like it too, I couldn't work all the time with slipforms.
@huskodgn
Жыл бұрын
👍🥾👍
@SITENG
Жыл бұрын
Thanks!
@user-gr6wh7lx2q
7 ай бұрын
tell me mate how you join the main rebar of the collector beams to the core wall . thank you
@SITENG
7 ай бұрын
no beams on this one, but that would be couplers mate
@user-gr6wh7lx2q
7 ай бұрын
@@SITENG and we'll need various main rebar templates or our surveying team will be exhausted to mark those coupler positions . meaning , another lots of sheet . oh shiiit .....
@kabirg.c.3398
Жыл бұрын
Can you please send me the name of laser used in her for slip form or link please
@SITENG
Жыл бұрын
Hi! I don't have it, sorry, you have to dig for it on net 100% you'll find it. If not come back to me :)
@agimkapidani6178
6 ай бұрын
Helo my friend
@SITENG
6 ай бұрын
Hello 👍
@agimkapidani6178
6 ай бұрын
It is me on the video 🤔
@agimkapidani6178
6 ай бұрын
Minutes 03:34
@kojo8770
Жыл бұрын
Hi Greg , roughly how many cubic metres gets poured daily and is this a 24hr operation ? Thanks
@SITENG
Жыл бұрын
Can't remember now TBH, but in terms of height is was often ar. 2m - I don't have the walls section area to tell you, but these were small slips. I worked before on Nova slip and couple of weeks on 100BG (the biggest one that time 😁)before I took over the basement. This one wasn't operating 24h, but there are slips like that 😁
@kojo8770
Жыл бұрын
@@SITENG Thank you for answering, great informative videos
@SITENG
Жыл бұрын
@@kojo8770 Thanks! Happy you like the vids😁
@albertricohermozo442
Жыл бұрын
Hi sir good day can i apply at slipform technician .. thank you
@SITENG
Жыл бұрын
You have look on LinkedIn for it, or a cv-library etc
@husseinlakkis4823
3 ай бұрын
Hello dear, Do you have any video for the construction of mass concrete foundation for thickness of 5 meters and above. If you have please let me know and how could contact you. would be appreciated.
@SITENG
3 ай бұрын
Hi! I don't have a video like this and you can contact me on LinkedIn
@onlinepg4066
2 жыл бұрын
How slab reinforcement joined with slip form wall ??
@SITENG
2 жыл бұрын
Hi! It's there on the vid. Kwikastip is used (continuity strip/contibar - pull out bars). After the decking is ready this is first job to do - pull out the bars + do the final check if anything is missing as there might be some drill&fix needed. Then pull out bars are spliced with slab rebar. Rebar is connected and the small recess after taking rebar out in the kwikastrip quarantees good connection in terms of shear force.
@onlinepg4066
2 жыл бұрын
@@SITENG tq
@SITENG
2 жыл бұрын
You're welcome 😁
@elmankhan4571
Жыл бұрын
If i have a civil DAE, can i get a job in england
@SITENG
Жыл бұрын
You will need a work permit in UK, or a sponsorship from a UK company
@mdafsara6363
Жыл бұрын
I am Foreman sir
@SITENG
Жыл бұрын
Good, so what do you want to know?
@funnyvideo7252
Жыл бұрын
sir i have knowledge about slipform and i am a civil engineer so i will get job
@SITENG
Жыл бұрын
look for it, there are jobs for slipform engineers, so there shouldn't be a problem
@mohammadafsar705
Жыл бұрын
I am Foreman
@SITENG
Жыл бұрын
Good! I am an engineer
@jackullla87
2 жыл бұрын
Pan Jan nie pytal zebys juz zostal ? :D
@SITENG
2 жыл бұрын
Ja bede pana Jana pytal czy moge jakies filmiki z jego budow robic :)
@unknow-tn8fo
Жыл бұрын
Why did you break up with JRL?
@SITENG
Жыл бұрын
I might be back soon, who knows 😁
@RajuKumar-wm1ix
Жыл бұрын
Hii
@SITENG
Жыл бұрын
Hi Raj!
@user-lq9wi9ku6s
Жыл бұрын
design of horizontal slip form????
@SITENG
Жыл бұрын
?? did I say horizontal?
@user-lq9wi9ku6s
Жыл бұрын
@@SITENG sorry I am just asking if there is any available references for designing horizontal slipform
@SITENG
Жыл бұрын
I don't think there are horizontal ones. You would just pour the walls and move on ( could be done on some rail system). That's why slipform is a great idea as there are no horizontal elements taking the loads 😁
@user-lq9wi9ku6s
Жыл бұрын
@@SITENG I have been asked to design a horizontal slipform for a concrete tunnel
@SITENG
Жыл бұрын
@@user-lq9wi9ku6s check Peri solutions, they have some shutters on rails running horizontally. Still it will never work that fast , hope you will find something, or convince them to use maybe precast elements to construct the tunnel
@unknow-tn8fo
Жыл бұрын
How to transfer datums?
@SITENG
Жыл бұрын
Use a line laser
@unknow-tn8fo
Жыл бұрын
@@SITENG on the rebar? But we will loose many millimeters let's say if we have 50 stories
@unknow-tn8fo
Жыл бұрын
@@SITENG i know someone are transferring with the tape measure, but is it accurate?
@SITENG
Жыл бұрын
on the climbing tube, then whatever you need on the rebar - using electric tape.
@SITENG
Жыл бұрын
Typically there is a good steel tape inside the core to refer to it. If you mean the tape measure that's the one you'll be using almost all the time as you will be measuring off your datums - marks on the rebar etc. Slipform is a tape measure job and it's well enough. BTW tape measure is our best friend and I have impression people want to measure every simple thing using the EDM - whatever can be checked/measured with the tape should be done with the tape :)
@mohammadafsar705
Жыл бұрын
I want you jobe sir
@SITENG
Жыл бұрын
Great, look for the job and get it
@albertricohermozo442
Жыл бұрын
Good day every one i looking for job slipfoming operator ..
@SITENG
Жыл бұрын
Anyone can help??
@jamieconlan8681
2 жыл бұрын
Have you worked on jump form?
@SITENG
2 жыл бұрын
Not much really 😁 A was setting a Meva jumpform in 100BG project and also Peri RCS in Alperton
@parwejalam9456
6 ай бұрын
Any vacancy your company please reply me
@SITENG
6 ай бұрын
not at the minute, sorry
@mohammadafsar705
Жыл бұрын
Please reply me sir
@SITENG
Жыл бұрын
Hi Mohammad!
@habibullahabbasi2600
2 жыл бұрын
contecte with me
@SITENG
2 жыл бұрын
Let me know please what you need, or contact me on LinkedIn 😁
@govindvekariya8627
11 ай бұрын
Finishing is not good coming
@SITENG
11 ай бұрын
what do you mean by that?
@govindvekariya8627
11 ай бұрын
@@SITENG sir i am also slipform technician but wall finishing not coming good
@govindvekariya8627
11 ай бұрын
Sometimes concrete stick on panel so effect on wall finishing
@SITENG
11 ай бұрын
@@govindvekariya8627 yeah wall finish is not the best, but fortunately it's not that important there
@govindvekariya8627
11 ай бұрын
@@SITENG sir can you give me your email ID so i want to do something convection about slipform
Пікірлер: 106