I want to share with you a cool idea of how to quickly, in just a few minutes, sew slippers. And they can be made of absolutely any material.
Sew them very quickly, and it does not require any special skills.
I wanted to make myself a new pair of fur slippers. Just in the stocks there was a piece of white color.
Very stylish slippers turned out, and what cozy ones! After the bath, it's a pleasure to walk in them, the legs are soft and warm.
For sewing slippers, you do not need a sewing machine. I only stitched one seam, and that was by hand.
Let me tell you everything in detail, and you will see for yourself how easy it is!
- To make slippers, you will need a piece of fur or any other material, about 20x70 cm in size.
- I took the insoles. I have felt ones, but you can have any, as long as they don't crumble at the edges.
- If the insole is the right size, this is good, and if it is more than necessary, then it should be cut along your leg + 1.5 cm to the length.
- I rounded the original outline a little and cut off the excess.
- To cut out the upper part of the slippers, I measure the width of my foot and add 1 cm to each side. I got 17 cm.
- To 17 cm, I also added 3 cm to the freedom of fitting, the thickness of the fur and the allowances. I cut out a square of 20x20 cm.
- I bent the square in half, and manually stitched the connecting seam.
- The finished part was folded so that the seam was in the center.
- I cut a piece of sintepon (thickness 1 cm) 10x20 and attached it to the part with a basting seam. So the upper part will be denser and will keep the shape better.
- Narrowed the part on each side by 0.5 cm. The narrow part is located in the side of the sock.
When all the preparations are ready, you can start assembling the slippers.
- I apply hot glue to the felt insole and glue the ends of the fur insole.
On fabrics, the hot glue sets very well, the details are practically not torn from each other, so the slippers will serve for a long time and feel good even after washing.
- To the wide part of the insole on both sides, I glue the finished upper part with sintepon. I do not forget to trim the inner layer a little, so that the thickness when gluing is less, and the outer layer overlaps the inner one.
- I glue another insole on top with hot glue. It serves as a sole for slippers and covers all seams. This insole is slightly longer on each side than the one under the fur.
- It remains only to decorate the slippers. I put on some flower-shaped rhinestones.
How do you like the idea of such "fast" slippers?
Thank you for watching this video! Please don't forget to LIKE, COMMENT, and SUBSCRIBE.
Watch other useful videos on the channel:
Негізгі бет Slippers in 10 minutes. The lightest MK. How to quickly and easily sew slippers
Пікірлер: 56