I'll show you how to make slopes on plastic windows. PVC slopes should be started 1 day after installing the window. This is the most inexpensive and clean option for installing slopes on windows and doors.
The procedure for installing plastic slopes on windows is as follows:
- Using a sharp knife, cut around the perimeter of the window the frozen polyurethane foam that protrudes beyond the window profile;
- Using small flea screws, screw the starting plastic profile to the window profile, in increments of 10 centimeters. First the top one, and then the bottom side ones. Leave a gap of several millimeters wide between the profiles in the corners for installation of a corner plastic slope.
- We measure the dimensions of the upper and side slopes, transfer them to plastic panels and cut the slope with an electric jigsaw or knife, strictly to size;
- We insert the top panel into the starting plastic profile, apply mounting foam between the panel and the slope and fix the panel to the wall with masking tape;
- We mount the side panels in the same way, screwing the starting plastic profile to the window sill. Between the top and side plastic slope we place a starting plastic profile for a tight connection;
- After the mounting foam has hardened, remove the masking tape and attach an F-shaped plastic profile to the cut of the plastic slopes using silicone or super glue.
- Fill the gaps that have formed at the joints of the plastic with plumbing white silicone or liquid plastic.
If you need to make an expensive version of plastic slopes, then you can use sandwich panels.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Video sections (chapters):
0:00 Introduction
0:29 Necessary tools and materials
1:59 Removing protective film and excess foam
3:39 Slope measurements
3:56 Installation of the starting plastic profile
8:34 Cutting plastic slope panels
13:14 Installation of plastic panels on slopes
22:38 Installation of an F-shaped plastic profile on a slope
25:43 Sealing seams
26:35 Finished slopes on plastic windows
26:58 Conclusion
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
And in this video I will show you how to make plastic slopes for windows
• Пластиковые откосы на ...
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Subscribe to our channel and watch videos on this topic #slopesonwindows, #window, #plastic, #repair, #slopes.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Our social media channel following the links:
Facebook - / 1147375328749226
Instagram - instagram.com/delo__maste...
Telegram - t.me/delo_mastera_boitsa
Odnoklassniki - ok.ru/delomasteraboitsa
VKontakte - vk.com/club141674316
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Become a channel sponsor and you will get access to exclusive bonuses. More details:
/ @delo_mastera_boitsa
Thank you very much for your support friends 💕
To develop the channel www.privat24.ua/send/1mdwa
Негізгі бет Тәжірибелік нұсқаулар және стиль Slopes on plastic windows
Пікірлер: 651