Here is the specs.
360 LA bored .030, align honed with studded mains, square decked with .009 negative deck, Summit (Scat) forged crank 4.00 stroke, Scat rods, Summit Forged pistons with 15 cc dish, rings gapped for nitrous, balanced, King Racing narrow rod bearings, Speed Pro performance main bearings, Kevco oil pan with crank scraper, M72 HV oil pump, billet timing gear and chain set, Lunati 20200713 hyd roller (installed straight up), Howard's (Morel) lifters, Summit .105 wall 7.050 pushrods, Harland 1.6 rockers, Fkp1 hardware kit, API balancer, Trick Flow Heads with 1.55 OD valve springs with 140 to 145 on seat, this one has the Trick Flow intake. Using a new 850 Brawler race carburetor and Doug's headers on the dyno. If we have time, we will see how much different a 2 inch super sucker spacer makes, and a 1 inch. Compression is just a shade over 11 to 1, and quench is on the tight side at .036
Негізгі бет Small Block Mopar Stroker 360/408 LA. Trick Flow Heads and Intake, Lunati Voodoo Hydraulic Roller
Пікірлер: 20