Nice product and vid! I ordered two 7 inch ones! Good value for money and great possibilty to make beautiful UI! I will use it for my heating system and home controller!
@GoodOldDays168
Жыл бұрын
Nice work, beautiful GUI design, well described, great video, thanks!
@ReviewRapido
Жыл бұрын
Hello, Great video, I appreciate the time and effort to make such video, I have an question, and I hope you can help me, does the DGUS have a option to do a delay and change screen or icon? for example when a button is pressed it change screen and it return to the previous screen after a couple of seconds, or change the button icon and return to the previous one, like a delay or a timer, i could not find anything like that, thanks.
@rockzhang976
Жыл бұрын
Hello Sir! You could send a instruction to the MCU and let the MCU to return the previous one
@oscarvera1099
Жыл бұрын
Excelent video. I have aquestion. I did a similar proyect but the screen has returned data to the arduino when I conect the Tx line from the arduino to the screen. This makes the readings buttons dificult. Without conecting the Tx line, the buttons work very well. Could you give any advice?
@iotprojectsideas
Жыл бұрын
You need to connect both TX and RX pin to the Arduino as well as connect GND pin if you are providing power supply separately to Display and Arduino.
@oscarvera1099
Жыл бұрын
@@iotprojectsideas I Will check that. Thank you very much.
@aungyehman8925
6 ай бұрын
Hi can you please kindly answer?Can these DWIN HMI use to control claw machine?
@KIRAngb633
7 ай бұрын
why usb to ttl converter is needed
@gezgincihasan
Жыл бұрын
Nice work. Thank you for sharing. What is the allowable max. distance between arduino and HMI screen? How long should max. cable length be ?
@fredrikbergquist5734
11 ай бұрын
It depends of which communication standard you use. If you select TTL 5V the distance is not that far. But if you use the other standard RSxxx and use shielded twisted pair the distance can be very long but you have to reduce the baudrate.
@Clip7heApex
8 ай бұрын
Why use software serial over the arduinos hardware serial rx tx ?
@white-in-china6713
Ай бұрын
can the HMI display work as UART master? Would it send requests to another devices, get data and display?
@tienat7403
10 ай бұрын
Is there any demo of stm32 with dht11 showing on dwin screen?
@ArifKhan-nd6fj
8 ай бұрын
Can we use this display with PLC?
@arewatec
Жыл бұрын
hello... please can you add fan speed controller with digital display?
@golantv273
Жыл бұрын
Can you show with the 2 decimal?
@rarazib4920
10 ай бұрын
Thanks
@nypreH
8 ай бұрын
I didnt get how you connected DWIN to Arduino, can you give a clue pls?
@narender2341
Жыл бұрын
How to send decimal numbers from ESP32 to Dwin display?
@golantv273
Жыл бұрын
Temperature value on serial moniror 29.73 but value in display show become 0.29 i set 2 decimal in dgust. How to solve
@golantv273
Жыл бұрын
I see this vide show the value are integer
@iotprojectsideas
Жыл бұрын
You can send float type variable as well.
@arungarg1997
Жыл бұрын
my project does not work please help
@boopathysuntharan2606
Жыл бұрын
Is it possible to change pages in hmi by giving a signal from Arduino through uart?
@iotprojectsideas
Жыл бұрын
Yes possible
@boopathysuntharan2606
Жыл бұрын
@@iotprojectsideas okay
@eileyo
Жыл бұрын
We can't design UI using pargramming languages?
@rockzhang976
Жыл бұрын
It is too complex to design the UI by pargramming languages if you use the screen in the video.
@CaiZhongwen2023
Жыл бұрын
很厉害
@MohammadAli-ni3zk
Жыл бұрын
HOW TO CLEAR MEMORY
@engrkhawar3397
Жыл бұрын
Plz send you web site
@iotprojectsideas
Жыл бұрын
Check description or pin comment
@TungPham-ku7xf
Жыл бұрын
hello. I have a question. How to upload through sd card?
Пікірлер: 39