CLEAR and PRECISE. This was a easy to follow instructional.
@TheAlesia555
Жыл бұрын
Awesome! Clear instructions for me to follow! And I can do it myself! Thank you so much!!!
@rickeymatthews1663
8 ай бұрын
Man. Thank you so much. Was able to set up this thing in a matter of seconds with your help programming.
@johnm3486
8 ай бұрын
Outstanding and very clear instructions!
@FOUR157ONE
11 ай бұрын
Thank you very much Brother. Everything is working as I wanted.
@SultanKhan66
2 ай бұрын
Terrific instructions, Thank You!
@Darksolar4
Жыл бұрын
Great video. It was easy to install, thanks
@MarioMartinez-nt4ch
Жыл бұрын
Super helpful and easy Thank much
@michaels394
Жыл бұрын
THANK YOU! I Google searched my keypad and your video popped up. My assistant threw away the manual so I was lost 😂
@kwikset
Жыл бұрын
Hi Michael - We're thrilled to hear our video helped you! Please follow this link for the SmartCode 270 Installation & Programming Guide: kwik.st/3NtKDPv Thanks ~ Kwikset Social
@ILIKE2003COBRAS
5 ай бұрын
Dude your awesome for this Video. The damn manual does not say anything to this instruction. I appreciate you a lot. Hope all is well your way. Take care!
@Celineday
Жыл бұрын
Thank you!!!
@felipetoribio2690
5 ай бұрын
Thanks for the help I feel like I'm expert 😂 now 😊
@iriscruz4762
Жыл бұрын
Thanks!
@markarmenta1919
9 ай бұрын
Great video!! 👍🏼 Buying another one for our rear exterior door!
@kettlebellyogini
Жыл бұрын
Thanks
@user-hb8dq1ft1j
7 ай бұрын
Fantastic video couldn’t be any more clear than this.
@chrisdavis6798
8 ай бұрын
What size are the mounting screws at 4:22? Unfortunately my box didn’t have them. I can return the lock but it may be easier to get the screws from Lowe’s.
@kwikset
8 ай бұрын
Hi Chris - We're here to help! Our Support Team is happy to order these screws for you, as they are covered under your product's warranty. Please reach out to us here so we can help you with this right away: kwik.st/3LTGvHd Thanks ~ Kwikset Social
@par4n1
7 ай бұрын
Working as is should but I cant get the deadbolt to reach fully extend to the "locked" position. With the door open and activating into the locked position I can still push the deadbolt in by hand but when using the key it locks into position. All parts are free and not in a bind
@youngjmar
7 ай бұрын
I'm having the same issue
@kwikset
7 ай бұрын
Hi Marcus - Here to help! Please try the steps below to help fix this: 1. Ensure that the strike pocket is at least 1" deep. 2. Replace the batteries with recommended alkaline only and not lithium or rechargeable. 3. Perform the door rehanding per page 19 of the installation guide linked here: kwik.st/40ISNIM 4. Test the lock with the door open, then test the lock with the door closed and make adjustments if needed. Thanks ~ Kwikset Social
@vallecillomey4671
Жыл бұрын
👏👏👏
@Sodisna
2 ай бұрын
The turn piece doesn't want to say vertical. It stays at a 45 deg angle.
@kwikset
2 ай бұрын
Hi - During the installation, please ensure the latch is locked and the flat blade is vertical. The interior turn-piece should be rotated vertically when it's off the door to install it vertically onto the door. See Page 12 of the Installation Guide: kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5052438_9270.pdf Thanks ~ Kwikset Social
@davercountingcigars
5 ай бұрын
Great video. How do you program it for multiple unlock codes ?
@kwikset
5 ай бұрын
Hi and here to help! To add additional user codes to the SmartCode 270, please follow the same programming steps: 1. Press the Program Button 2. Press the 1 Button 3. Press the Checkmark 4. Enter the User Code 5. Press the Checkmark If this is not working, please ensure to complete the Door Rehanding step on page 19: kwik.st/3SCYZ2F Thanks ~ Kwikset Social
@israguitarra
5 күн бұрын
I just bought this one and installed but I’ve been doing exactly what you show in the video : I pressed the programming button below battery then I press num 1 but ones I press the check mark for the fist time immediately fail with 3 bips along with red light flashing. I doesn’t even give me chance to enter my code for the first time. Please I need to know what is wrong here . Thanks
@kwikset
4 күн бұрын
Hi @israguitarra - To fix this, please check try these steps: 1. Factory reset the lock. 2. Perform the door rehanding per page 19 of the installation guide: kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5052438_9270.pdf 3. Add the User Codes Thanks ~ Kwikset Social
@user-qr6uv1vw1r
10 ай бұрын
Does these smart code locks hook to blue tooth where can be unlocked from phone
@kwikset
10 ай бұрын
Hi Yolanda, These locks are stand-alone locks and not compatible with Bluetooth connectivity. Have a great day! ~ Kwikset Social
@mykymacaroni7829
3 ай бұрын
I moved and took my lock with me I’ve been trying to use my code for an hour now should I go buy a different one
@kwikset
2 ай бұрын
Hi! Please try factory resetting and rehanding the lock after installing it on your new door. Here's a link to the installation guide. See page 19 for these instructions: kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5052438_9270.pdf Thanks ~ Kwikset Social
@anthonymr921
Ай бұрын
Does it have to be locked for the key to come out?
@kwikset
Ай бұрын
Hi! The key can be removed when in either the locked position or the unlocked position. If you are unable to remove the key, please follow these steps: 1. Open the door and place the latch in the locked position. Remove the Key from the cylinder, unscrew, and remove the interior assembly of the lock. 2. Ensure that the Flat Blade tailpiece is vertical and the latch is still locked, as shown on page 13. 3. Reattach the interior assembly and complete the Rehanding process on page 19. 4. Test the lock with the key. kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5052438_9270.pdf Thanks ~ Kwikset Social
@staceystace_
Ай бұрын
I just installed a locked but when I press the program button there’s no sound or light (green or red).
@kwikset
Ай бұрын
Hi! Please try replacing the batteries and follow these steps in order: A. Complete the Factory Reset. B. Perform the Door Rehanding per page 19 of the installation guide linked here: kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5052438_9270.pdf C. Program a User Code and test the lock with the door open. Thanks ~ Kwikset Social
@gregshull2160
Жыл бұрын
Video is great, however when programming I get neither a red or green light, but a white light. Not sure why this is happening and I cannot find much for troubleshooting answers. Any help is appreciated.
@kwikset
Жыл бұрын
Hi Greg - Hi! Our Consumer Support Team is here to help... please contact them here: kwik.st/3I2FkDC or call them at 1-800-327-LOCK (5625). Thanks ~ Kwikset Social
@norvelmccalla8251
27 күн бұрын
It's not working for me. Whenever I try to program, it's not working. Keep getting red and green lights but nothing else work
@kwikset
26 күн бұрын
Hi @norvelmccalla8251 - To fix this, please check the installation, try a new set of batteries, and reset the lock. Here are the steps: 1. Factory reset the lock. 2. Perform the door rehanding per page 19 of the installation guide: kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5052438_9270.pdf 3. Add the User Codes Thanks ~ Kwikset Social
@israguitarra
5 күн бұрын
@@norvelmccalla8251it’s happening to me too .. any recommendation or help I appreciate it.
@rumblingend8443
11 ай бұрын
The key pad won’t light up and the led won’t light up but it still beeps
@kwikset
11 ай бұрын
Hi - Happy to help! Please try the following steps to get your 270 in working order: 1. Open the door and place the latch in the locked position. 2. Unscrew and remove the interior assembly of the lock, ensuring the cable is securely attached and the flat blade is in the vertical position. 3. Reattach the interior assembly with the latch still locked. 4. Replace the batteries, Factory Reset, and perform the Door Rehanding step on page 19: kwik.st/3XIfLhK 5. Program a User Code. For further help, please contact our Support Team here: kwik.st/3CZhvcG Thanks ~ Kwikset Social
@dondixon781
Жыл бұрын
I programmed it easy. But said I could have up to 50 codes. Have followed steps but it wont add more. Just original code works
@kwikset
Жыл бұрын
Hi Don - Our Consumer Support Team is here to help... please contact them here: kwik.st/3IXZTRS Thanks ~ Kwikset Social
@vsskalyan
7 ай бұрын
Do we have an app to control this. I downloaded the Kwikset app and it does not show the lock
@kwikset
7 ай бұрын
Hi and here to help! The SmartCode 270 is a stand-alone lock that cannot be accessed via an app. For Kwikset locks that allow remote access via the Kwikset app, please see the Halo and Aura locks here: kwik.st/3Mt9d1S Thanks ~ Kwikset Social
@vsskalyan
7 ай бұрын
@@kwikset thank you. can you please advise the process to change password
@kwikset
7 ай бұрын
Hi - To reset the user code please follow these steps: 1. Factory reset the lock which will delete all user codes or delete a single user code. 2. Perform the door rehanding. 3. Reprogram the new User Codes. See page 19 here: kwik.st/3SsOSNU Thanks ~ Kwikset Social
@jonathanestrada3948
27 күн бұрын
How do you find the programming code
@kwikset
26 күн бұрын
Hi! The programming code is the code of your choice between 4-8 digits long that is different from your user code. Please see the step to set up your programming code on Page 19 of the Installation Guide, labeled "Add/Change Programming Code (PC)": kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5052438_9270.pdf Thanks ~ Kwikset Social
@pauloptsoutside
10 ай бұрын
The process does not work, unfortunately.
@kwikset
10 ай бұрын
Hi Paul - Our Consumer Support Team is here to help... please contact them here: kwik.st/47uOm7k Thanks ~ Kwikset Social
@renelopez5328
Жыл бұрын
Hey man! Thank you very much for this awesome and helpful video. You helped my daughter and I out a lot. God bless you! Since you helped me out so much I would like to give offer you a gift offered to every human being and that is the free gift of salvation that Jesus Christ offers. All you have to do is accept Him into your heart, believe He died on the cross to save you and follow Him from this point on. God bless you! Thank you again!!! "I am the way and the truth and the life. No one comes to the father except through me."- John 14:6 "For all have sinned and fallen short of the glory of God and all are justified freely by His grace through the redemption that came by Christ Jesus."- Romans 3:23-24
@katinalaessle
Жыл бұрын
Thank you! But my problem is the auto locking when I shut the door doesn't work! It doesn't auto lock after 30 seconds. Can you do a video on how to program the codes please.
@kwikset
Жыл бұрын
Hi Katina - Here to help! To program your 270 lock, please follow the Programming and Auto-Lock instructions on Page 19 of the installation guide linked here: kwik.st/3CFS6Va Thanks ~ Kwikset Social
@GodivAndCream
Жыл бұрын
@@kwiksetthis isn’t helpful for me. I have already set my door code. When I press 8 check mark it immediately beeps. I have no opportunity to set auto lock to three minutes. How exactly do I do this. Is this step supposed to be done before creating the User code?
@kwikset
Жыл бұрын
Hi Cheri - Here to help! To enable the Auto-Lock feature, first Press the Programming button, the 9 button, and the checkmark. After enabling the Auto-Lock, then you can set the Auto-Lock Time Delay by pressing the Programming button, the 8 button, the checkmark, press button for time delay (button 3 for three minutes), and the checkmark. Should you need any further help, our Support Team is happy to assist you here: kwik.st/3Pwuc6o Thanks ~ Kwikset Social
@GodivAndCream
Жыл бұрын
@@kwiksetOMGGG, THANK YOU. This had me going crazy.
@Officialsearch21
10 ай бұрын
This thing only works when the key is in!!!! What is wrong this. Two. I had to call a locksmith because it locked and the password didn’t work!
@kwikset
9 ай бұрын
Hi R N - We're here to help! Please try the following steps: 1. Open the door and place the latch in the locked position. Remove the key from the key cylinder. 2. Unscrew and remove the interior assembly of the lock, ensuring the cable is securely attached and the flat blade is in the vertical position. 3. Reattach the interior assembly with the latch still locked. 4. Replace the batteries, Factory Reset, and perform the Door Rehanding step on page 19: kwik.st/3RbxJYt 5. Program a User Code. Test your lock with the door open. Should you need further help, please contact our Support Team here: kwik.st/3sIUid0 Thanks ~ Kwikset Social
@adean25
9 ай бұрын
Terrible, over produced.
@jamesrobison7378
Жыл бұрын
Just bought this piece of trash and no the only thing it can't do is take codes once codes are entered it does absolutely nothing. Neither does the lock button it just lights up and does jack shit.
@kwikset
Жыл бұрын
Hi James! Our Consumer Support Team is here to help... please contact them here: kwik.st/3CwoD0k or call them at 1-800-327-LOCK (5625). Thanks ~ Kwikset Social
@jamesrobison7378
Жыл бұрын
@@kwikset it was defective I got another
@CPS24.7
Жыл бұрын
@@jamesrobison7378 Apparently Kwikset doesn't care that you spent valuable time (and likely money) discovering their product is inferior.
Пікірлер: 67