One of the few reviews to show takedown and reassembly, thanks!
@highcaliberhaymaker
Жыл бұрын
Absolutely, I do breakdowns with all gun reviews 👍🏻
@brendayarborough1271
4 ай бұрын
Agree!! We bought the M&P FPC for a surprise birthday gift to our grandson. I have viewed so many videos and this is the ONLY video I have seen that thoroughly explains takedown and reassembly. We are in Comifornia, so have the ridiculous fin attached to the grip - pray with us that the assault weapon ban is abolished soon so we can take that off.
@sharkbait000
Жыл бұрын
“Reliable, fun, and accurate.” Your review is why I am sold. Checked it out at my local gun range/store and will pick mine up next week. Other online reviewers complain and harp on the fact that the “storage” for the mags are a big negative and not quick & easy to retrieve the mags…but I guess they expect this for serious everyday “combat” and not storage.
@highcaliberhaymaker
Жыл бұрын
Glad to hear it man. Thank you for your support!
@johnm2366
10 ай бұрын
What do they want, egg in their beer?
@sharkbait000
10 ай бұрын
@@johnm2366I’ve realized everyone wishes they were in every development & design meeting. Can’t please everybody…I’ve actually picked up the S&W Response instead a few weeks ago and really enjoy it.
@jessemiles5856
10 ай бұрын
Everyone hates on the mag release setup but I 10/10 love how they set it up. Love my FPC
@SuperEddie0228
2 ай бұрын
Yes, I agree. Everyone always complains about the magazine release as if it's something that requires a degree.. They almost sound like crybabies, but it's the simplest thing. It is simply the push of a button, but people complain because you have to push the left to take out the right. And i'm like jesus christ, why is that so complicated. I'm glad these kids didn't grew up in the 70s. And eighties, when we actually had to get up from our butts to change the tv channels😅😅😅
@justauser
Жыл бұрын
Love love love new options in the 9mm folding rifle segment
@InezKennedy-i3g
24 күн бұрын
Davis Timothy Walker Steven Hernandez Jessica
@tommccormick9290
Жыл бұрын
Got mine a couple months ago and had to send it back to S&W for light to no primer strikes. But after getting it back (bolt was replaced.) ,it's run flawlessly. It's now my new PDW.
@highcaliberhaymaker
Жыл бұрын
That is unfortunate to send it back but I'm glad to hear you are now experiencing what I am with it. 2A all day my man, enjoy!
@larryh3267
2 ай бұрын
This shoots really tight groups was very impressive and he a I own one
@coachjoe4523
Ай бұрын
Nice review, thanks- may pick up one soon!
@mikeconnole815
Жыл бұрын
Excellent Thanks Clear and concise.
@highcaliberhaymaker
Жыл бұрын
Glad you enjoyed it
@mnrodriguez
Жыл бұрын
What is the position of the trigger during disassembling? Thanks!
@highcaliberhaymaker
Жыл бұрын
Should be in the cocked position
@BrokeShooterCo.
5 ай бұрын
I can’t seem to find a video on how to get the feed ram out for polishing. I’m sure I could figure it out. I just wanna see someone do it first, but nobody does it. Everyone just does a regular field disassembly.
@BrokeShooterCo.
5 ай бұрын
The straps inside the bag don’t go in a specific place. You could move them around anywhere you see fit.
@brian.louis107
28 күн бұрын
I wonder if the buffer tube is the same diameter as the AR? I don't like the bulky shoulder stock and would replace it with a low profile butt stock.
@highcaliberhaymaker
23 күн бұрын
Won't work since the charging handle is built into the buffer tube
@brian.louis107
22 күн бұрын
@@highcaliberhaymaker If not the same diameter, I have a lathe, I could make a tube work.
@wipperwil
Жыл бұрын
Looks an awful lot like Ontario… where are you guys?
@highcaliberhaymaker
Жыл бұрын
South Carolina
@brandonhawkins3266
6 ай бұрын
Got mine a week ago, first range time this week. Thoroughly impressed,accurate and fun to shoot. I’m in love.
@highcaliberhaymaker
6 ай бұрын
Glad to hear it!
@TheMorganMonroeShow
Жыл бұрын
Dude, the magazine releases go both directions. It’s ambidextrous. whether you’re left-handed or right handed you could push down or pull up on the same side. This way, no matter which way you grab it, you can reach either side. Genius.
@highcaliberhaymaker
Жыл бұрын
Yes but still not ideal for fast reloading
@fterra90
4 ай бұрын
You covered everything! Thanks
@kenhawk2881
Жыл бұрын
I find putting my little finger under and lifting up gets the 23 round magazine off the same side.
@davidgreen4326
Жыл бұрын
Very cool. Great video
@Greg-js1lv
Жыл бұрын
Thanks for the review
@vincentc2160
Жыл бұрын
you can avoid tapping it with a hammer to put the bolt back in place. What's retain the bolt to seat fully foward is the top of the hammer that is in the way and stop the bolt. I found the best way is to put your pinky finger into the ejection port, push down on your hammer a bit while pusing on your bolt from the rear and the bolt will seat with absolutly no force. Just need a bit of torque into your pinky!
@vincentc2160
Жыл бұрын
let me know if that work for you!
@MeMe-ze8dz
10 ай бұрын
I just use a punch to press it down.
@mnrodriguez
8 ай бұрын
That worked for me perfectly! Thanks!
@noahbodi6418
11 ай бұрын
Rifle accuracy testing should be done at a further distance that 40 yards. I would've tested at atleast 75 yards. I know it's not an AR 15 but shooting a 9mm round at 75 yards with accuracy is possible. Good video. Thanks for the review and breakdown.
@highcaliberhaymaker
11 ай бұрын
Noted. I have since moved ranges as it did not allow that distance. Now I have over 500+ yards 😁
@MeMe-ze8dz
10 ай бұрын
On mine, at 45 feet it cuts a single hole with a Holosun 510C. At 100 yards it hits the 8 inch gong so...
@apex403
Жыл бұрын
I'm between this and the Ruger PCC - nice thing about this is it's a bit cheaper and comes with the picatinny rails all the way across the top. Also cleaning on this looks WAY easier than the ruger. Both excellent guns, but I'm leaning towards this. My only question is how does the folding out clip/mechanism feel? Do you feel like after a few years it'll wear out and it'll just slide open? Or is it pretty durable?
@highcaliberhaymaker
Жыл бұрын
That is my thought as well, but this thing is so well made I don't see it being an issue. The only thing I think that will need replacing is the charging handle since it's plastic/polymer and a little notch clicks into the mlok slot to keep it folded open. Cheap part to replace though.
@middleagedbaldguy6774
Жыл бұрын
I have a pc9. Its trash. Im picking one of these up today from my local Cabellas.
@highcaliberhaymaker
Жыл бұрын
Glad to hear it. Check out the link for PSA, might get a better deal
@BigDogRidgeback
Жыл бұрын
Fabulous little gun.
@thegrantdanielsband
9 ай бұрын
Most awesome and fun gun 🙂
@albertomendez8146
Жыл бұрын
Hey on the video it looks like its being shot left handed 1:45 minutes into the video, Is it?
@highcaliberhaymaker
Жыл бұрын
It isn't just the way the camera flips when on self screen.
@joseramos7476
10 ай бұрын
Great review.
@cwillybiker
Жыл бұрын
Well done video. Other videos that I watched showed the bolt going back in rather easily. Like you, I had to use the back end of a screwdriver. I'm glad to see that it's not just my FPC that has this issue.
@highcaliberhaymaker
Жыл бұрын
Thank you for your support, happy to it
@charlieragland8295
9 ай бұрын
Mine was the same, getting it out needed a little negotiation. After 500 rounds it comes out easier but still likes a nudge back into battery.
@purepr2010
11 ай бұрын
Best breakdown yet, thank you.
@highcaliberhaymaker
11 ай бұрын
No problem, thanks for watching
@gregkepics5615
Жыл бұрын
At the end of the dissasembly for field stripping, I reached for my FPC and accidentally dry fired the gun. Now, after assembly when I pull the charging handle the gun won't reset and the trigger wont fire. Is this something I can remedy myself? Thank you!!
@highcaliberhaymaker
Жыл бұрын
Yes you need to disassemble again and reset the trigger
@redveiner
11 ай бұрын
I saw on a different site a guy did the same thing and ended up sending it back to SW to be fixed. He stated he read in the directions this is a big no-no (pulling the trigger while disassembled) and can cause damage.
@JeffN-A
10 ай бұрын
You can reset the trigger with your little finger, or a non-metal object like a magic marker, or a dowel. I did this to mine on purpose to see how difficult it was to reset. No big deal. Sending it in SW is going waaay overboard.
@josephrivas9523
8 ай бұрын
What kind of scope yr using ? 18:24
@highcaliberhaymaker
8 ай бұрын
Sig Saur Romeo MSR
@jolkraeremeark6949
28 күн бұрын
@@highcaliberhaymaker is that a special amount?
@highcaliberhaymaker
28 күн бұрын
@@jolkraeremeark6949 no, comes with it
@michaelnudelman8591
Жыл бұрын
I want one !
@PepeDeezNutz
Жыл бұрын
Should have got a KelTec
@highcaliberhaymaker
Жыл бұрын
No way
@donschlonski2936
9 ай бұрын
And yet here you are on an SW video
@PepeDeezNutz
9 ай бұрын
@@donschlonski2936 KZitem was on auto play. I search terrible videos and yours came up
@PepeDeezNutz
9 ай бұрын
@@donschlonski2936 yup here I am
@takenusername
6 ай бұрын
I appreciate the narrow thinness of the Sub2000, even the gen 3 which wasn’t out at the time of your comment. The on board magazine storage was one of the reasons I got one of these over the Sub2000. I have a gen 1 Sub 2000, and I was very close to getting the gen 3. While it’s more concealable, this is the better “rifle”.
Пікірлер: 70