Smith and Weston makes great pistols. And I am not going to be happy until I have the new bodyguard in my hands..
@Andrew-bb1iq
Ай бұрын
You can tell every inch was thought out so well with S&W
@davidbrown2284
Ай бұрын
I’ve been a long time LCP / LCP Max person. I’ve always wished there was a firearm with these main designs. The undercut trigger guard, super high dovetail, super thin, 10 round capacity. Compared to the LCP Max, this is light years ahead. I got it on order, should be in my hands Monday or Tuesday.
@Unjustified_Bot
Ай бұрын
The intro with Jason showing the pistol and Kevin getting on him earned this channel a Sub. 😂
@GalleryofGuns
Ай бұрын
And we thank you!
@LostinMIA
Ай бұрын
Love mine I just wish they could make the 12 round mag a bit easier to load the final 2 rounds as well as how hard it is to insert it into the gun when its full. You have to smack it hard or squeeze it in with your fingers if you're strong enough. Away from that it's an amazing fire arm.
@stephenbonaventure9423
Ай бұрын
I think James Bond should carry the bodyguard 2.0 in the next James Bond movie
@terryoliver1410
22 күн бұрын
Best new gun on the market. No question. Put Smith and Wesson you need take a look at that Magpul Daka utility organizer. It was made for your gun. Retails for under $30 and comes in a couple colors. But Smith and Wesson you need this case in your box.
@terryoliver1410
22 күн бұрын
I’m just a consumer who found the perfect match. No vested interest other than I am as happy as can be with those two products I guarantee your weapon will love the organizer and it will protect it . Loose The cardboard!!!
@Fintastrophe21
29 күн бұрын
Ran about two hundred rounds through mine today. Ten round mag didn't lock back a few times and it really didn't like fiocci ammo but federal ran great.
@ACommenterOnYouTube
Ай бұрын
ive got the Response, the FPC and the MP15-22
@caseyruble3014
Ай бұрын
You got my click when you include a watch
@4StonesHandcraft
Ай бұрын
You did miss something, left handed controls ( : Edit- I was pleasantly surprised to see the version with a thumb safety and it is ambi !
@christianhardwick6530
Ай бұрын
I almost wanted the original I think I picked up an LCP max instead. I’m liking this edition Bodyguard n am willing to pick one up as soon as Academy offers em.
@sublimeister9630
Ай бұрын
Needs an integrated laser, just like the first one… 👍
@Chris_FigTV
Ай бұрын
I just picked one up yesterday and I love it. I traded my LCP max for it.
@Mike-cu6gk
22 күн бұрын
The S&W BG2.0 is everything the other pocket 380’s failed to deliver. Not hating on other brands because I have a few of them.
@Christopher-pe6zj
Ай бұрын
apple AirPods are not hearing protection lmao
@sbellcaster
Ай бұрын
noticed several times during this video that it seems the bodyguard 2.0 failed to lock the slide back on an empty magazine, which is an issue that i've also had on my shield plus. unfortunate :l
@Eric-tp4de
Ай бұрын
Large hands can ride the slide causing it not to lock back. Small to medium hands will not have that issue.
@GalleryofGuns
Ай бұрын
We did have that happen to us a few times. Generally, it was with the 10-round mag. And indeed it was our hands doing it. This pistol is *tiny*.
@Swamprowdy
Ай бұрын
Honest Outlaw immediately explained in his review that his big hands would ride the slide catch and not lock open. He did not consider this an issue and he absolutely loves the gun.
@kengray5793
Ай бұрын
Hey Kevin, I looked at one of these today at my LGS. Did you get an idea of actual accuracy with this firearm on paper? My wife currently carries a Smith EZ 380 but we are not happy at all with the accuracy of that pistol. Even sandbagged it gets 6”+ groups at 30 ft and they are all over the place. That’s with Federal HST, Speer Lawman, and Win Ranger. She can do much better with her LCP but the capacity isn’t there. I’d love to pick this up if the accuracy potential is better. I might even get one for shorts carry and ditch my LCP.
@GalleryofGuns
Ай бұрын
We didn't do any actual accuracy testing - i.e., groups on paper - but it was extremely easy hitting steel at 7-10 yards, even at speed. At the end of the range session, we went out to 27 yards and got hits as well. Steel targets were approximately 10" circles.
@albertreade7607
Ай бұрын
When will the thumb safety version be available
@Dave--gp1qx
Ай бұрын
It’s on Smith’s web site with a safety and the SKU: 13926
@albertreade7607
Ай бұрын
@@Dave--gp1qx I meant absolve for sale
@4StonesHandcraft
Ай бұрын
Local shop owner sez he’s getting two of them tomorrow
@Jim-oo7dk
Ай бұрын
So did they say whether the gun worked or not?
@georgezipp8783
Ай бұрын
When do they hit the shelf ?
@TADDs101
Ай бұрын
My local Vance Outdoors has them now for $399
@Barchenhund
Ай бұрын
Bud’s guns for $399. Good luck finding a pocket holster.
@georgezipp8783
Ай бұрын
@@Barchenhund maybe stickey I think the name holster
@georgezipp8783
Ай бұрын
@@Barchenhund Oh Thanks by the way . " Carry On "
@GalleryofGuns
Ай бұрын
@@Barchenhund S&W tells us that Crossbreed, C&G, and DeSantis all have holsters for it.
@oo7-ro6bu
Ай бұрын
When are you going to have them in stock?
@buddy9577
Ай бұрын
NO NEED TO REMOVE ROLL PINS
@Prepare2Survive
Ай бұрын
The only thing I wish S&W had done differently with this gun is make the extractor removal easier. I don't like having to hammer out roll pins when I want to clean behind the extractor every 1000 rounds. I know most people don't shoot that many rounds in guns like this, but I do because I handload my own ammo using cast lead bullets and they shoot dirty so I like doing a thorough cleaning after every 1000 approximate rounds fired. Glock makes it very easy to do a detailed strip removing every single part. I just wish other companies would take that into consideration a little more when designing a gun.
@shj2000
Ай бұрын
Roll pins is your hang up? Okay.
@Prepare2Survive
Ай бұрын
@@shj2000 Not just roll pins, but anything that requires a hammer to be used shouldn't be necessary when doing a detailed strip of a gun removing every single part in the entire gun. Glock figured out a way to accomplish that 40 years ago. It shouldn't be hard for S&W to figure out a way to do it today.
@TADDs101
Ай бұрын
Whaaahhhh cry us a river, you have literally posted this on every KZitem video on this new Bodyguard 2.0 .. tapping out a pin every 1000 rounds is NOT a big deal man, grow a set
@AlternativeEnergyNC
Ай бұрын
😂 dude it is not a big deal, crack a beer and do it when your watching tv.
@Prepare2Survive
Ай бұрын
@@AlternativeEnergyNC I like my cars to be as easy and simple to repair and maintain myself too. Engineers have the ability to make things very simple to take apart, but they choose not to for whatever reasons. Most of them obviously don't care about the end user and the DIY factor. That's probably also why most cars now-a-days require removing a dozen things just to replace one part instead of engineering the layout to make parts replacement more DIY friendly. I guess the engineers would rather you pay the dealership to fix the car instead so they don't care anymore about making anything DIY friendly.
Пікірлер: 54