+Oscar Romero i have 4.10 gears and a lp dana 30 and a ford 8.8 both locked
@DarrenW360
9 жыл бұрын
any idea what the rating on the hitch is
@ktjeep8690
9 жыл бұрын
It says on it it's not rated for towing but it can defentally take what ever you wanna tow with a wrangler
@kww0027
9 жыл бұрын
I think with the bumper mounted on the frame and my jeep having a 1.25" body lift, the tailgate might not hit the grease cert. Great looking jeep!
@turfwerks1
7 жыл бұрын
change out to a flush mount grease fitting and it will not hit any more.
@marksinsel3511
10 жыл бұрын
i cut the back off the whole bigger for hitch
@ktjeep8690
9 жыл бұрын
it shouldn't hit with like half inch body lift
@saan8
6 жыл бұрын
Another quick question please. I finally installed that bumper and I totally ripped off that stupid zerk fitting just like you mentioned. Do you happen to know what size the fitting was? I bought 1/4” 28 but it’s a bit tight and I don’t want to force it too much just in case.
@ktjeep8690
6 жыл бұрын
Don't force it for sure. I don't know the size I have never re-greased it.
@saan8
6 жыл бұрын
I made a solution to this problem. The size of the grease fitting is a 6mm-1 size. So i put one on and greased it. Then I inserted a flat head 6mm-1 bolt that i bout at home depot for a buck.The door clears the bolt without hitting it. And when ever it needs to be greased up again, ill just unscrew it, put the zerk back on to grease it up then but the flat bolt back on.
@greenkayak67
8 жыл бұрын
Good general info, thanks for putting it out there. It answered a lot of my questions.
@ktjeep8690
8 жыл бұрын
+greenkayak67 i appreciate the comment i plan to put a few more videos out in about 3 months unfortunately but when i do they will be good videos
@gorillahd9247
6 жыл бұрын
Nice video and a good review. I have the same bumper on my 2002 TJ and it has served me well. I had no clearance issues with the grease fitting. Scott
@ktjeep8690
6 жыл бұрын
hey Scott, does your jeep have any body lift done to it?
@gorillahd9247
6 жыл бұрын
No body lift - just stock spacers. Scott
@saan8
6 жыл бұрын
ive been trying to find anything on line. are there any accessories for this bumper? im trying to find attachments for jerry cans and a hi lift mount
@ktjeep8690
6 жыл бұрын
Not that I know of for the bumper specifically. Smittybilt offers a kit to put stuff on almost any spare tire though.
@saan8
6 жыл бұрын
finally! yeah, i kept looking for accessories for bumper itself until you mentioned the tire carrier. now i see a bunch of them that attaches to the tire. now to spend more money lol.
@cub2sopwith
8 жыл бұрын
link?
@Gunmetalbluejeeptjs
6 жыл бұрын
How is the bumper so far would you reccomend it
@ktjeep8690
6 жыл бұрын
great no complaints really and yes i would recommend it.
@BigDaddysPlati
9 жыл бұрын
How well do the d shackles hold up? As far as the mounts.
@ktjeep8690
9 жыл бұрын
They are great no issues at all
@lex_one-two
8 жыл бұрын
Dirtworx rear bumper is better quality and improved modifications.
@ktjeep8690
8 жыл бұрын
Dirtworx bumper is not as thick as smittybilts it may have a better design but it isn't as strong
@lex_one-two
8 жыл бұрын
It will hold up to a 40" tire if not at least a 37"... the smittybilt only does 35" so yea...
@ktjeep8690
8 жыл бұрын
it can defiantly hold bigger than a 35" tire and its still made out of thicker metal
@jeffreymartinez8506
8 жыл бұрын
What's that plating next to the tail lights?
@ktjeep8690
8 жыл бұрын
m.quadratec.com/products/product.php?pid=12526+201+07 pretty sure it's this but I don't have these anymore I have metal ones now
@jeffreymartinez8506
8 жыл бұрын
Thanks
@destruxxx
6 жыл бұрын
Got 3/4 done with the install on mine and found out they only halfway cut the groove for the snap ring that holds the swingout on. I've got a ratchet strap holding the thing down for now till I figure out what to do with it.
@ktjeep8690
6 жыл бұрын
holy shit lol, I would get a hold of them and get them to send a new one. But till then id probably ride without the swing.
Пікірлер: 33