I got the matco ADV .. I love them had them for about 4 years so far . Still good and no issues . Plus the number is so easy to see.
@dcyamahatech
3 жыл бұрын
I love the gp sockets and I have all 3 depths in 3/8. But after buying a snap-on deep set i gotta say i prefer those now. The way snap-on makes the wall thickness so thin is great in tight spots. I'm a socket fool too and i have some late 90s craftsman that supposedly was manufactured by sk and they're awesome too.
@CPthetooladdict
3 жыл бұрын
Hell ya great video do it buddy!! Love this video!!
@Occupant_
3 жыл бұрын
Good video. All my regular impact sockets are GP. Very satisfied. For swivels I went Snap On for durability and ease of warranty.
@itsatoolthing6323
3 жыл бұрын
That's a good call on Snap-on impact wobbly. Snap-on are my favorite wobbly socket.
@tty117
3 жыл бұрын
I went with the harbor freight icon wobblers and man they are holding up well for the money. Harbor freight just needs to get a tools truck rolling... 😂🤣
@BLAKEDILLONRACINGDEVELOPMENT
3 жыл бұрын
Heck yeah man, I love it. At the shop he had great luck with the GP sockets, and their duo sockets! Have the 1/2 ADV and all the Snap On and they are great as well.
@iowafox2206
3 жыл бұрын
I have the Grey pneumatic semi deeps and like them. I also have the Harbor Freight impacts and there actually pretty good sockets hold up well.
@soundretarded
3 жыл бұрын
Wow man! I feel you being addicted. I’m not even a real mechanic and I have an addiction. 😨
@jeramy2398
3 жыл бұрын
I've had a couple Gp's rust but not as bad as cornwell blue power. That was them being kept in non insulated pole shed. I rate gp and blue power same a good budget socket. I have had them 9 years at newest
@rjw261984
3 жыл бұрын
GP and Sunex are great impacts for the money. 👍
@gilmansgarage6341
3 жыл бұрын
I use my 20mm ( in case you didn't realize I am talking metric..lol ) on lug nuts . rusty 21 split the tin cover with a chisel.. Also 18 on rusty 19. I don't have the half sizes They make or see a reason to..I am in the rust state..Great job!
@moparfanboy
3 жыл бұрын
Converted all my impacts to ADVs. I’ve had great luck with them and tolerances are nice and tight + my matco guy is awesome
@moparfanboy
3 жыл бұрын
@@tommyc2748 yeah those are solid. Dont doubt that Sunex makes them, but there’s a noticeable design difference from what I’ve seen
@Pauleh123
3 жыл бұрын
@@moparfanboy I agree, the Matco finish seems nicer, the machining seems smoother, better stamping, more designs. I mean the ADV lineup is huge, you can get any socket in any design you could ever dream of, (though sunex may not make every socket in the ADV lineup, I think 1/2 and up are customized GP, regardless, the quality seems to be there along the whole line) Lifetime no hassle warranty that drives to you. Sunex is great for the money, but not quite the same. Sunex does alot of custom OEM work for Matco. Matco has alot of OEM manufacturers, my dealer makes no secrets about it. Here's the thing that people don't understand about a good tool dealer. He will tell you what tool you need. He's been around and he knows what tool to do that exact problemed job that is losing you money. He increases your efficiency. Sometimes the right tool can save you 3+ hours on a job. That convenience costs money to. Especially for an independent and you don't have the "support network" that the dealership offers, it's invaluable.
@miguelbeltran5888
3 жыл бұрын
Dude you need to do a tour of your tool box and all of your tool carts
@conductormike3step
3 жыл бұрын
I have got to try those grey pneumatic sockets.
@tty117
3 жыл бұрын
I’ve had them for a little over a month and between my snap on 761-a and my snap on 768 long neck they’ve had the shot worked out of them and are holding up fantastically. The finish they put on there holds up really well even when rubbing against other metals.. just get it oily and wipe it down and good as new..
@ramsandrzr3706
3 жыл бұрын
Very nice 👍
@akovic100
3 жыл бұрын
You can buy GP from Mac Tools (it's a "non-catalog" item). Go to the GP website, write down the part number(s) you are interested in, then add the letters GRY in front of the part number(s). For example part number 9712UM (1/4" metric universal metric set) would be GRY9712UM when ordering from Mac Tools (call or talk to your local dealer). And they will handle the warranty. Mac ships free too, just need to pay sales tax. One thing that GP won't do is warranty their stuff bought from places like Amazon, Zorro, etc, or if you buy them private sale from craigslist, ebay, or Facebook marketplace. I would only buy GP from a non-authorized distributor for a lower price if I want to keep an emergency back-up set for my main sockets that I use.
@SAVikingSA
8 ай бұрын
The thing about Taiwanese tools is they were China before we used China for everything. Decades now of institutional know-how in building quality tools. I prefer American but all my impacts are Taiwanese GP's and I love them.
@johnnybravo4976
Жыл бұрын
Just upgraded my gear wrench impact set to a Matco 3/8 7-19mm standard and deep socket set. It was on sale $73 with my student discount don’t need them but couldn’t say no to the price
@Toolaholic7
3 жыл бұрын
The Matco hardline sockets,USA made.Seen it on a few of mine.Some Snap On dealers will not warranty anything worn out telling you anything worn out isn't covered under warranty.Dealer my dad dealt with told my dad this once,tried to get a worn out socket replaced once.
@mt1885
3 жыл бұрын
They are lifetime warranty I would call up Snapon and say you need them warrantied.
@Toolaholic7
3 жыл бұрын
Had another dealer warranty them out without a problem
@montevallomustang
3 жыл бұрын
They old matco are usa, new matco isn't. Or at least they removed the usa from the socket and the package and the website. Why would you change your tooling just to drop the usa stamp
@Toolaholic7
3 жыл бұрын
USA made in the hard line,I sent one in for warranty to Matco and sent an USA made socket as a replacement to me
@ericcampbell2360
3 жыл бұрын
I wish matco still offered usa made sockets.
@fastlanecarcarellc3608
3 жыл бұрын
Yeah those ADV look just like the sunnex sockets I got for Christmas. I'm pretty surprised that the "real" Matco's are made in tiwan.
@mt1885
3 жыл бұрын
Hi Montevallo what you think of the Gearwrench Impact sockets got some metric 3/8 and wanted to get the 1/4 impact metric sockets (shallow/deep).
@montevallomustang
3 жыл бұрын
The only gearwrench sockets I have are axle sockets, but I have no complaints about them
@ViperMods_216
3 жыл бұрын
Impact sockets live a tough life haha
@Steve0885
2 жыл бұрын
I think the grey pneumatics look like the adv's except the finish maybe imo... I also got the old school Matco sockets. The one's with the CP numbers and the 1 1/2" is huge and heavy. Doesn't taper like the Snap on or GP
@montevallomustang
2 жыл бұрын
I think adv is sunex, I also think sunex and gp are made in the same factory in Taiwan.
@derekrhodes3846
2 жыл бұрын
Just curious because I too love the Hansen rails. Are the snap on impacts the only ones that fit appropriately? This would be a great video for the future because I’ve looked everywhere on KZitem and can’t seem to find it. I have Sunex and was debating on upgrading to snap on 1/4”, 3/8” and 1/2” for this reason but would love to confirm they fit on all the Hansens prior to purchasing.
@montevallomustang
2 жыл бұрын
Yes they fit really well. The snap on impacts are shorter and thinner than most other impacts so they fit like chrome on the hansen trays
@derekrhodes3846
2 жыл бұрын
Are you able to check if your gp duo sockets will fit correctly on the hansens? I’m assuming the duos are just as thin as the snap ons?
@montevallomustang
2 жыл бұрын
@@derekrhodes3846 I haven't tried to put them on anything but they are really thin so I'm sure they would fit
@sasquatchrosefarts
7 ай бұрын
@@montevallomustangsockets are the number one tool. You aren't weird for being into them. It's weird when guys go crazy for combination wrenches when they are a special use tool. Realistically, even backing up a nut, you're better off with socket on both sides.
@brandon6451
Жыл бұрын
I bought my first Snap-On set of 3/8 shallow impacts. They are very thin and small compared to our Proto we use at work. Is that a good thing? Some negatives to my snap-on is the numbers aren't stamped deep so its hard to read and the metal is really soft. After one use where the impact goes into the socket its already deformed. We used our Proto for 3 years and it don't look like that.
@montevallomustang
Жыл бұрын
The sockets are designed to deform like that it doesn't hurt them
@djsi38t
Жыл бұрын
Proto and Williams usa give you the same quality for way less money.If you want thin wall then you just buy Thin wall sockets.I have a Proto 19mm Thin wall for lug nuts.Usa Sockets have That shallow broaching on deep sockets which is better for starting a bolt by hand.
@rudydaberry122
9 ай бұрын
My Matco dealer at work says that Marcos ADV sockets are made by Sunex, and he’ll warranty Sunex stuff
@gearandloathing4057
3 жыл бұрын
I have a suspicion that the Matco ADV impact sockets are made by Astro Pneumatic. AP makes a lot of Matco exclusive tools including the “Hex Grip” line. Also the font is the same on the AP and ADV sockets.
@montevallomustang
3 жыл бұрын
I believe most adv is sunex
@Pauleh123
3 жыл бұрын
@@montevallomustang I was told by my dealer that GP makes ADV (1/2 at least). It has a more matte finish than the sunex, but has very high quality roll stamping as well as lazer etch unlike the GP. Maybe the 1/4 and 3/8 are sunex, they have close finish.
@montevallomustang
3 жыл бұрын
@@Pauleh123 I know the 3/8 has a different style from gp. But you may be right about the 1/2
@asmautollc
3 жыл бұрын
I’m pretty sure the regular Matco’s are made in USA. They don’t always put the COO on them for some bizarre reason.
@montevallomustang
3 жыл бұрын
If it is made in USA, they removed the markings and took it off their website.
@asmautollc
3 жыл бұрын
@@montevallomustang I know, it makes it suspicious. I’m guessing it was the transition after Armstrong shut down, they weren’t certain if they could find a USA replacement. I’ve noticed even their Made in USA pinless swivels, some say USA, some don’t. There’s no rhyme or reason to it. They really should straighten that out.
@mt1885
3 жыл бұрын
GP has no warranty on wear (Snapon/Matco/Mac all warrantied on wearing out) Snapon impact sockets got the Flute in them and metal quality is superior to all of them. I believe the MATCO branded impacts are made in USA at least ones I have are made in USA.
@dakotataylor7909
3 жыл бұрын
The adv line has the cuts/flutes in the corners just like FD snap on sockets. I have both.
@montevallomustang
3 жыл бұрын
I've warrantied some worn out gp sockets, the Napa I get them at will swap them. The new matco is not usa
@andrewscott8892
3 жыл бұрын
Proto makes a 3/8 set from 6-24
@brandon6451
Жыл бұрын
That's what I use and they have handled everything I can give them
@andrewscott8892
Жыл бұрын
@@brandon6451 used they are nice I have the shallow and deep, I also bought an SK 3/8" deep 6-26mm chrome set, I just like complete kids need to get a 1/4"Dr 5/8" deep and shallow
@brandon6451
Жыл бұрын
@@andrewscott8892 we're both socket junkies lol
@wolleysegap9740
3 жыл бұрын
Where do you get the Grey Pneumatic from ?
@montevallomustang
3 жыл бұрын
Some napa stores carry it
@mrpistonrecaro6483
3 жыл бұрын
eBay Amazon
@montevallomustang
3 жыл бұрын
@@mrpistonrecaro6483 don't buy gp from Amazon, you can't get it warrantied
@scottjohnson3226
Жыл бұрын
JB Tools online.
@scottjohnson3226
Жыл бұрын
@@montevallomustang Does the Montevallo NAPA on Hwy. 25 carry them?
@Oldcoinsandstuff1
3 жыл бұрын
Gray pneumatic seems to tall. The short and deep are taller than anything else I have.
@johnb1121
3 жыл бұрын
Once you go GP never go back...
@SeanJKeys
3 жыл бұрын
Lift time warranty???
@montevallomustang
3 жыл бұрын
Yes
@mmholling87
3 жыл бұрын
Snap-On is king but for a budget minded individual I would go with matco ADV they're made in Taiwan but they're good quality and easy to get a replacement.
@montevallomustang
3 жыл бұрын
It depends on whether you have a good relationship with a matco dealer, if not I would just buy sunex or grey pneumatic
@walkersullivan6201
3 жыл бұрын
If you have to read the MM you shouldn't be taking apart anything
@wolleysegap9740
3 жыл бұрын
Ha !
@lindamichalak5567
2 жыл бұрын
Matco doesn’t make anything, they either ink stamp or have the company that is making the tools for them engrave their name. Most of their tools don’t even have where it’s made stamped on, heck Harbor Freight made in Taiwan is the same quality.
@davidshellhaas1730
Жыл бұрын
I do not like paying American prices for imported tools. Just me
Пікірлер: 78