File Downloads: drive.google.com/drive/folder...
I show you how to get your license off of your Windows XP operating system and then place it in the correct folder so Diagnostic Suite will start up with Windows 7 without the license error! The version of my Diagnostic Suite is 17.2. Your version may not be the same. If you already have version 17.2, just download a copy of my VERUS that's already been set up and transfer your license over to it. If you already have version 17.2, just download a copy of my VERUS that's already been set up and transfer your license over to it. Link below...
WINDOWS 7 STARTER HARD DRIVE IMAGE with 17.2 already installed:
drive.google.com/drive/folder...
!!!!!! --- MUST READ THIS FIRST --- !!!!!
This WILL NOT upgrade an older version of diagnostic suite to 17.2. This video will show you how to upgrade Windows XP to Windows 7. If your scanner has an OLDER VERSION of Diagnostic Suite, you WILL HAVE TO REINSTALL THAT VERSION AGAIN. For people with scanners that's already on 17.2, they can download a copy of MY hard drive and clone it to a NEW hard drive. Then, you WILL HAVE TO PUT YOUR SCANNERS LICENSE back on your hard drive. It will work. I have two VERUS scanners and I swapped hard drives between them, and I used their original license to get them to work.
-----------------------------
PLEASE READ THIS CAREFULLY!!!
*********
WARNING: Be aware that the Snap On S Button, Keyboard button and the brightness buttons will not work after installing Windows 7 or Windows 10. If anyone knows how to get these to work please share the knowledge! Thanks!
WARNING: After installing Windows 7 and getting Diagnostic Suite working, you MUST DISABLE *DESKTOP COMPOSITION*.
To disable DESKTOP COMPOSITION go to: *Control Panel\All Control Panel Items\Performance Information and Tools\Adjust Visual Effects*. Then under the Visual Effects tab, turn off DESKTOP COMPOSITION.
WARNING: You MUST HAVE Internet Explorer 11 installed on your VERUS.
You don't have to use it but you have to have it installed. If you don't, you'll have a script error pop up while using *SureTrack/FixIt*.
BEFORE you start installing Windows 7 on your VERUS, please do the following first.
1. Boot up your VERUS using your original Windows XP hard drive and copy your license file from this folder... C:\documents and settings\All User\Application data\m1-sk\shopstreamxt to your D: Drive and also save the license file to a USB thumb drive.
2. Now paste the license file you copied into this folder: C:\ProgramData\M1-SK\ShopStreamXt
Do not lose this file! It MUST be used to get Diagnostic Suite work after you install Windows 7 or Windows 10.
To get started....
You MUST purchase another hard drive and clone your original hard drive. Then, put your original hard drive away for safe keeping.
DO NOT INSTALL Windows 7 or Windows 10 on your ORIGINAL hard drive! YOU HAVE BEEN WARNED!
Here's what you need to get you going....
1: Purchase 1 or 2 SATA to USB 3.0 adapter cable. You can buy one off of eBay or Amazon. They're cheap.
2: Download Macrium Reflect Hard Drive Cloning Software: www.macrium.com/reflectfree
3: You can either buy a bootable Windows 7 USB drive off of eBay or you can download a brand new ISO image here... drive.google.com/drive/folder... and make your own. Search eBay for Windows 7 USB recovery drive
To make your own bootable USB drive, download a program called *Rufus*. rufus.akeo.ie/
This allows you to create a bootable Windows 7 or 10 memory stick.
4: You'll also need a USB keyboard and mouse. The touch screen will not work while installing Windows 7 or 10.
5: A USB memory stick with 8GB of storage
6: A bootable ISO image of Windows 7 or Windows 10 and an activation key to activate Windows during installation.
7: Purchase a Solid State Hard Drive from your favorite online store or local electronics store.
drive.google.com/drive/folder...
Негізгі бет Автокөліктер мен көлік құралдары Snap On VERUS - How to install Windows 7 & Diagnostic Suite 17.2 on your older VERUS!
Пікірлер: 318