I forgot to mention and show 🤦🏻♂️ that there is a security screw that is included and can be used if someone chooses to do so. I doubt many use it and to me, it’s not needed but it is available. 👍
@StevenYoungcaptual
Жыл бұрын
Have one for my 2023 MSP Ultra Red. Great product, works perfect, fits perfect...
@rayjou742
4 жыл бұрын
I like it, but damn it costs $120! A fix-it ticket is $25. I’ll wait till that happens or when a cheaper version comes out.
@marc_benton
4 жыл бұрын
Well worth the money IMO to keep a cop from pulling you over for not having a front plate and then tagging you for other things like tint. Ask me how I know...
@aaronbounds1336
4 жыл бұрын
Love the idea. I have two concerns. One is the terribleness of people in that they could just come up to your car and take it off. There's no particular reason to do that other than the be a jerk, but people can be jerks. Also, I would be curious to know if over many thousands of miles of road bumps and vibrations if it accidentally falls off. Maybe both of those problems could be prevented by a simple tether of some sort and a cheap lock or something like that.
@marc_benton
4 жыл бұрын
Aaron Bounds thanks for watching Aaron! I should have mentioned it in the video 🤦🏻♂️ but they provide a security screw that’s locks it onto the lower grill. They said literally no one uses it but it’s there if someone chooses to use it. Also, there is no chance of it vibrating loose. It takes some force in order to open the latch that opens the connecting points, there is no way that will vibrate and open.
@Thunder7ga
4 жыл бұрын
That is a great product, but I am thankful I live in a state that does not need to run with one. But, if I did, I'd be looking for something like this.
@DSRTSLA
4 жыл бұрын
Yes!! Must have to say the least. I really like mine on my 3 Marc. Super simple to snap it on and off. Great Vid🤙🏽
@RayNLA
4 жыл бұрын
Nice video. I considered this for a while but Instead the hassle, I put the CA sticker plate on my 3.
@danielocegueda4399
4 жыл бұрын
This is what I need! Thank you for the video.👍🏼
@MarkAndrewsOCFOA
2 жыл бұрын
Good video, you should mention that the Breakaway Plate Mount Joint ($2.00) to have the feature where the SnapPlate breaks off.
@utcman
4 жыл бұрын
Great product I will definitely be getting one when our Y comes in! Thank you and keep up the great videos, happy your back making them!
@marc_benton
4 жыл бұрын
utcman you’re welcome, glad to help! And more videos to come for sure. 👊
@NAY2GAS
3 жыл бұрын
For me I bought it so that when I attend car shows and car meets I can take off my front plate very easily.
@haptics2
4 жыл бұрын
No locking mechanism? Would it be easy for your tag to be stolen?
@marc_benton
4 жыл бұрын
Don Song I forgot to mention it in the video so I pinned a comment on it. But yes, there is a screw that goes in the side that locks the plate down, but no one uses it.
@jameslawson8193
4 жыл бұрын
Just ordered it!! Awesome product!
@ronaldfish1569
4 жыл бұрын
Cool nice I think it’s about time that the federal government needs to stop the states that require two plates it’s not necessary thank goodness I live in Florida that doesn’t require two plates
@ZennyUT
2 жыл бұрын
is that height adjustable?
@marc_benton
2 жыл бұрын
Unfortunately, no.
@jimmymorra62
4 жыл бұрын
Hey I’m just some broke college student in Fresno 🤧 but I love watching your videos about your Tesla’s it’s nice to see your opinions on them it feels more realistic. I’ve watch other KZitems that are really big and it all feels like it’s coming from the company telling them what to say thanks for keeping it real man hope to see you become big one day keep at it 😆
@marc_benton
4 жыл бұрын
Thanks for watching Jimmy! My goal has never been a “big KZitemr”. I just enjoy filming, editing and helping people in general about Tesla. It also gives me a place to send people that ask certain questions on twitter. I have a full time job so I do this when I can. But more videos to come! 😀
@jimmymorra62
4 жыл бұрын
Marc Benton Yeah I just found you on Twitter I just can’t wait till I can afford a model 3 one day so I can start my own journey with the car 😆 Tesla is the future and they look like really good cars 🚗
@smoothfeeder
3 жыл бұрын
I just ordered one, they look awesome. And they post to Australia too!
@ryanmwal
4 жыл бұрын
This is a great option. I just risk it an toll without because I didn’t want to stick anything to my car. My only concern is driving that beautiful car through a car wash....NOOOOO. Great video. Thanks for sharing
@marc_benton
4 жыл бұрын
Yea, no car was for me but many do it so just a warning. 🙂
@danromero
4 жыл бұрын
Looks great and super easy. Would've liked to have seen footage of the car in motion, to see if the SnapPlate rattles.
@wobuffet
4 жыл бұрын
How much force did it take for you to SNAP that plate mount off? if it's that flimsy, i'm afraid it may snap off on bumpy rides or if someone walks by yanks/flexes it forward. it's nice that you can get a replacement plate mount, but replacing the license plate is not as cheap.
@marc_benton
4 жыл бұрын
I pulled on it pretty hard so it takes some force. Someone bumping into it isn't going to break it.
@rasinhope
4 жыл бұрын
Great product!!
@jeffreysims1865
4 жыл бұрын
Hey Marc, are you concerned that someone may steal your plate now that half of the KZitem world knows that it detaches so easily? Or do they make a lockable version as well?
@marc_benton
4 жыл бұрын
Yes, it is lockable. There is a screw that goes in the side that locks the plate in place.... I just forgot to show it.
@tucalicuban
3 жыл бұрын
How does it work when you’re on the freeway? Does it snap off easily with high wind?
@marc_benton
3 жыл бұрын
Not at all.
@1baomao
4 жыл бұрын
$119?! That is just crazy.
@MindTesla
4 жыл бұрын
Exactly what I was thinking. Lol 40-50$ sure. 120$ smoking crack. That thing costs maybe 10$ to make... Gtfoh.
@marc_benton
4 жыл бұрын
You can’t just factor in materials on the cost of goods. How much time do you think it took to engineer it? Not to mention coming up with the idea. Is that not worth anything? I’d rather have it and use it than have a cop pull me over for no plate and then tag me for tinted windows or something else. Well worth the money IMO.
@MindTesla
4 жыл бұрын
@@marc_benton to engineer it? A clip on and off license plate holder? I will continue to drive around with no front plate. Not going to pay 130$ for a license plate holder. I'll just make one with a 3d printer or something for ~5-10$ and I'm sure people will share builds.
@1baomao
4 жыл бұрын
Yes, time for engineering is indeed worth something, just not $100 per piece considering material is inexpensive and doesn’t do much. Agree to disagree. Thanks for video!
@marc_benton
4 жыл бұрын
josh62294 ok, good luck. 👍
@goryspirit
3 жыл бұрын
I thought you couldn't take a Tesla into a regular carwash and had to get it hand washed.
@marc_benton
3 жыл бұрын
Why would you think that? It’s just a car.
@travisr70
4 жыл бұрын
Good stuff Marc 👍🏼💪🏼
@SD07BIKER
3 жыл бұрын
Discount code?
@bnnguyen
4 жыл бұрын
Great video Marc!
@stevelovesemmy
4 жыл бұрын
That’s genius!
@bentley2998
4 жыл бұрын
Question. Must the plate be mounted in the center or can it be mounted off-center, such as to the far left or far right? That look allows the plate to be on all the time and better shows the front of the car. This look is typically accomplished with tow-hook licence plate mounts but I’m not sure that Tesla has tow-hooks hidden behind the front bumper. I have that look in my current non-Tesla car. It does mess with the front right sensors though.
@mikepiliaris2081
4 жыл бұрын
I ordered one for my model Y a few months back, still waiting for it. I hope I’ll get it soon
@EveryAmp
4 жыл бұрын
We're perfecting the design and very close. Marc was using our beta unit to test for us. Hopefully start shipping within a week or two. Did you receiver your Y already?
@mikepiliaris2081
4 жыл бұрын
LivingTesla Yes
@EveryAmp
4 жыл бұрын
@@mikepiliaris2081 Nice! We met with Marc Friday (from a safety distance) with our latest version but wanted to make a couple more tweaks before we go wide release.
@FamilyFirstJ
4 жыл бұрын
Awesome
@michaelrbodner
4 жыл бұрын
Just move to Florida 😎
@marc_benton
4 жыл бұрын
Too humid. 😬
@michaelrbodner
4 жыл бұрын
Marc Benton that’s true 🥵
@wobuffet
4 жыл бұрын
How did you get your Model Y Snapplate? I checked the link and it's preorder/on backorder only??
@marc_benton
4 жыл бұрын
They are taking pre-orders right now, should be out within a few weeks.
@jasons7044
4 жыл бұрын
Can you show us again how to put it on and take it off? Maybe you can make a 10 minute video about that
@marc_benton
4 жыл бұрын
Sure... BRB
@nihongobenkyoshimasu3190
4 жыл бұрын
Easy to put! Easy to steal! Whoa! $120!
@marc_benton
4 жыл бұрын
Nihongo Benkyo Shimasu they provide a security screw in case someone wants to use it.... but no one does.
@herozero12th
4 жыл бұрын
$30?
@weekendfisherman8072
4 жыл бұрын
Great device but that seems to be inconvenient when you have to install and remove when parked.
@lalalandfam
4 жыл бұрын
Hey - i want to ma me sure you get a credit for my purchase. Any code to use?
@marc_benton
4 жыл бұрын
No, there is no code and I don’t get any kind of credit from you buying it. I just believe in the product and I think many people will enjoy it.
Пікірлер: 70