If I lived anywhere near you I would definitely be taking lessons. You are so patient and easy to follow!
@richardmccoll9297
Жыл бұрын
Thank you for your kind words. It would be a pleasure to be your teacher. Happy New Year
@sofiedelcomyn7786
4 күн бұрын
Thank you! I looked at other tubetutorials but you did it best!
@amberclemons-lopez7220
3 жыл бұрын
You are a great teacher! I am learning so much from watching you. Thank you for being a teacher.
@ninettehamo69
3 жыл бұрын
I just love to watch your videos. You are my favorite KZitem teacher 😊 Thank you so much for all your lessons ❤️
@richardmccoll9297
3 жыл бұрын
Thank you so much for your kind words!
@creativeliving3455
Жыл бұрын
Thank you Richard, another great video! 😊
@DunoonVanRijn-dx1hr
3 ай бұрын
Always a joy to watch you work and play ❤
@EmilyW.isawakenotwoke
Жыл бұрын
You are the Bob Ross of ceramics 😁 Great tutorial. Thank you. I sculpt.. i have tried using a wheel , but am so so bad at it 😂 I'll stick to making dragons and fish i think xx 🥰🕊️
@richardmccoll9297
Жыл бұрын
All I need is a perm...
@AteleDon
Жыл бұрын
What a wonderful teacher 😊
@sabengco
2 жыл бұрын
Thanks for sharing your obviously considerable knowledge. I learned a lot from this video.
@richardmccoll9297
2 жыл бұрын
Thank you for watching. Keep learning, I hope you make some wonderful pots.
@fritula6200
10 ай бұрын
Brilliant teacher..... l wish you every success ...
@richardmccoll9297
10 ай бұрын
Thank you, my success is you watching and learning.
@foldyriken3773
Жыл бұрын
Great teaching. Thank you
@ZinniaRAWR
9 ай бұрын
Thank you Richard this was wonderful to watch and has given me lots of new things to try :)
@richardmccoll9297
9 ай бұрын
Thank you Zinnia! Best of luck making some new pieces.
@aidadominguez2305
2 жыл бұрын
So beautiful, calm and lovely!!... Gracias!
@knightclan4
Жыл бұрын
On my list of things to throw this weekend Thanks
@richardmccoll9297
Жыл бұрын
Good luck and have fun.
@glueckskind671
8 ай бұрын
wunderbar...dankeschön!
@tnk1205
Жыл бұрын
You have such a charming smile! Thank you for sharing :) I love your lessons
@catia1861
8 ай бұрын
Fantastico, grazie infinite per aver condiviso questa tecnica veramente stupenda
@richardmccoll9297
7 ай бұрын
Muchas gracias!
@bridgethegap6873
3 жыл бұрын
very good & thorough i watched to remind myself how to use the sodium silicate (which i previously did on slabs which we rolled with rolling pins after drying the S.S.... & instead of just a SS lesson, i got a wheel lesson as well...& great tips i truly appreciate! (Like how the sodium silicate can dry on the lid and cut you when you open it, or how you need to wire cut the bottom of the pot even if you’re going to leave it on the bed so that it doesn’t dry and evenly and crack…) thank u 🙏🏼 so much ur a good teacher & a good video maker 🌺🤓
@richardmccoll9297
3 жыл бұрын
Thank you for your kind comments.
@richardmccoll9297
3 жыл бұрын
Mind the gap too...
@laculladellafenice7406
6 ай бұрын
Thank you from Italy ❤
@richardmccoll9297
6 ай бұрын
Thank you from California🙂
@zidaneliajunco7751
2 жыл бұрын
GENIAL trabajo !!!!! Gracias 👏👏👏
@richardmccoll9297
2 жыл бұрын
Muchas Gracias!
@hussaineh89
Жыл бұрын
I love ur presence, voice and aura
@richardmccoll9297
Жыл бұрын
Thank you!
@snonoyo5029
Жыл бұрын
great teacher!
@arabianwings8064
3 жыл бұрын
Oh, thank you so much. I purchased one such bowl a long time ago and always wondered how it is made. Do you buy the sodium silicate ready made or do you make it yourself? I really appreciate your clear explanations.
@richardmccoll9297
3 жыл бұрын
Hi Gabriele, You can purchase sodium silicate at any ceramic supplier. I am in Southern California and both Aardvark Clay and Supplies and Laguna clay both carry it. A little goes a long way so you do not need much and also make sure you clean the threads on the jar and close it tight when you are done.
@arabianwings8064
3 жыл бұрын
@@richardmccoll9297 Thanks! Cannot wait to try this technique.
@richardmccoll9297
3 жыл бұрын
@@arabianwings8064 Have fun with it, my students all enjoyed the magic of it all.
@aidasoto2936
Жыл бұрын
Muy buena pieza la de presentacion
@clifforddalton3067
Жыл бұрын
Very nice thank you. SS is so unpredictable isn't it? Always nice though.
@janettewilson5368
11 ай бұрын
Excellent demonstration…thank you for sharing your knowledge…I have a question can you apply slip or underglaze before you add the sodium silicate? 😊
@richardmccoll9297
11 ай бұрын
Yes you can and it works great!
@janettewilson5368
11 ай бұрын
@@richardmccoll9297 thanks for prompt response…greatly appreciated!!😊
@loreliemiller628
3 жыл бұрын
Thank you for clear instructions! Can you reuse the clay that has abit of sodium silicate on it that you cut away on the bottom?
@richardmccoll9297
3 жыл бұрын
Yes you can reuse the clay. A little does not adversely effect the clay, usually it gets wedged into a larger piece. Sodium silicate is normally used in casting clays to reduce the amount of water needed to make slip which reduces the shrinkage and cracking. Some people will use a deflocculated slip for joining clay together like with handles. Good luck.
@victoriafarrell2755
Жыл бұрын
Thank you!
@richardmccoll9297
Жыл бұрын
Thank you for watching and learning.
@juliefrisch1524
2 ай бұрын
Hi! Thank you for sharing this was so useful. I have made a bowl from a slip with sodium silicate and now i wonder if i should clean it off the bottom like i would with glaze? Like should i avoid sodium silicate on my kiln shelves?:)
@richardmccoll9297
2 ай бұрын
Yes. That is a good idea because sodium and silica makes a glaze...
@FUNESBE1
2 жыл бұрын
Muchas Gracias! Precioso e interesante!!!!
@richardmccoll9297
2 жыл бұрын
Muchas Gracias
@telmarodrigues3651
Жыл бұрын
Amazing...👏👏👏❤️❤️❤️
@chantelle4501
Ай бұрын
Can you use sodium bentonite for this?
@DunoonVanRijn-dx1hr
3 ай бұрын
Don't see enough of you
@arabianwings8064
6 ай бұрын
I have tried this now a few times, and I am getting a bit better. However, most of my cracks are vertical and fairly deep. They look nice enough (for a beginner pot), but I would like to have more of the smaller cracks and also some horizontal ones. I do not know which the variable is that I need to change: wheel speed, amount of sodium silicate, length of drying? Do you have any suggestion?
@richardmccoll9297
6 ай бұрын
It is hard to say without helping you in person. My best guess is to make sure the sodium silicate is dry to the touch before stretching. I hope that helps, keep practicing and you will fine tune it to your taste. good luck, Richard
@xm3364
Жыл бұрын
Hi Sir. I finally had a go with sodium silicate brushed on my vase, and the result was absolutely beautiful! I am so keen to do again and think if I apply on functional wares, how do go about glazing it? I have not seen any videos which demonstrate that. What do you think? Thank you!
@richardmccoll9297
Жыл бұрын
Hello, I did do a video on how I glaze my stretched pots. You can find it at kzitem.info/news/bejne/t6mur5inqKh_a44. Enjoy, Richard
@xm3364
Жыл бұрын
Hi Sir. I must have missed this piece of your video. That is cleared. I will try your method out when come to glaze. Thank you :-)
@richardmccoll9297
Жыл бұрын
You are very welcome. I hope your pieces come out well.@@xm3364
@satyanjena
3 жыл бұрын
Thanks a lot for such a detailed presentation...I want to venture into CLAY :-) please advise me some good book to start with.. 1: On clay 2: On Glaze chemistry 3 : On firing etc. Or do i need to join any class...plz advise how to start my journey...Regards
@richardmccoll9297
3 жыл бұрын
Hi Satyan, Thanks for watching! The current general book that I had for my students is by Vince Pitelka, Clay A Studio Handbook The Classic book on clay and glaze chemistry is by Daniel Rhodes who taught at Alfred, Clay and Glazes for the Potter. It is a little dense and good as a reference book although a little outdated with the use of lead in glazes which is frowned on nowadays. For glazes the best books are by John Britt: The Complete Guide to High-Fire Glazes which has been organized in a very clear way with great images (remember pictures are never as good as testing glazes yourself in your kiln). John also has a book on cone 4-7 glazes: The Complete Guide to Mid-Range Glazes, Glazing and Firing at Cones 4-7. A great reference is The Potters Dictionary of Materials and Techniques by Frank and Janet Hamer. I could go on but I think these books will serve you well.
@satyanjena
3 жыл бұрын
@@richardmccoll9297 heartiest thanks for your valuable time!!! I would definitely buy these books and let you know how i will be going in my journey....i hd been fumbling where to start how to start...Now i am saying myself let's starts from these books first and once i get some basics, i can think ahead....Again thanks a lot for your suggestions.
@richardmccoll9297
3 жыл бұрын
@@satyanjena Thanks! Good luck on your journey.
@dianequammen5543
10 ай бұрын
Can i use darvan instead of sodium silicate?
@richardmccoll9297
10 ай бұрын
I have not tried it so my best suggestion is to try it yourself. Let me know how it works for you.
@ellenbronkowski5228
3 жыл бұрын
Nice
@richardmccoll9297
3 жыл бұрын
Thank you.
@amseyvanvolkinburg4318
2 жыл бұрын
Can you use sodium silicate on low fire clay
@richardmccoll9297
2 жыл бұрын
Yes you can.
@shanemilehi
3 жыл бұрын
Is the stain on side just a wash wiped back?
@richardmccoll9297
3 жыл бұрын
You are correct. I glaze inside, top, bottom then wax on to of the glaze. Allow the wax resist to dry then wipe away with a damp sponge the excess glaze to the waxed line. I then brush a watery wash over the texture and finally clean the high areas with a damp sponge. Be sure to keep rinsing the sponge in water as you wipe. I made a video of the process for you : kzitem.info/news/bejne/t6mur5inqKh_a44 Thanks, Richard
Пікірлер: 78