I got a oem take off from a street bob for my bike his bike had no holes in primary cover my bike has did you have to plug the inner primary cover too?
@TheGingybeardMan
3 жыл бұрын
No need to plug the inner side of the primary as there is a steel collar insert so nothing can get into the primary. The outer plug is only for aesthetics and not there to stop anything from going into the primary
@douglasbaxter3346
3 жыл бұрын
@@TheGingybeardMan oh nice so the shaft hole is seals from the drive oil ? That’s good to know thanks for the reply!!
@TheGingybeardMan
3 жыл бұрын
Yes sir thats right, the shaft hole Is sealed to prevent anything entering into the primary drive oil 👍
@douglasbaxter3346
3 жыл бұрын
@@TheGingybeardMan sweet!! I haven’t had the cover off my 11 bob so wasn’t sure my 91 fxr is a lot different and with forwards.looks like il be swapping from mids this week cool
@Wr3tch3dR3tr0
3 жыл бұрын
@@TheGingybeardMan where can i find one of those plugs? my forward controls did not come with one.. i know its just cosmetic.. but i still want to plug that hole.. lol thanks in advance
@Wingnut131ci
3 жыл бұрын
Thank you soooo damn much! It was a breeze! If I had any constructive criticism to add it would have been to just slow down a tad. But man! You doing this to help all of us out here was phenomenal, thanks again! I look forward to seeing more of your videos. I may install bars next, I’m going to look through your uploads now!
@TheGingybeardMan
3 жыл бұрын
Always great to hear the vids were able to help someone. Thanks mate 👍
@paulsmale5436
6 ай бұрын
Sad that early forward kits came with an ill fitting chrome!!! primary casing plug, later versions come with a crinkle black painted plug fits exact with no exposed alloy. As a side is there plenty of clearance with the forwards from the TBR pipe ie not needing spacers that never came with my pipe or stickers : (
@ConnorFXDB
3 жыл бұрын
solid video! Thank you for the upload! Cheers from Texas!
@davidmurray9193
3 ай бұрын
The chrome plug do you know what size it is and what it called if i want to get one
@BigTruckRacing
4 жыл бұрын
First class job M8 right on .
@johanletourneur
4 жыл бұрын
Great video man! Will be useful when I’ll install mines. Might be a lot to ask, but is there any chance you could write a list of the tools you used? Not sure I have everything at home. Many thanks, keep up the good work.
@asexydeath
4 жыл бұрын
My local Aus dealer wants to charge me $400 to install... So off it but concerned about warranty. It's only 3 months old. Seriously looks like a half hour job.
@TheGingybeardMan
4 жыл бұрын
Mate that is bloody crazy, it only took me an hour to install and that was because of filming aswell. If you have a little knowledge with tools it's a simple job.
@asexydeath
4 жыл бұрын
@@TheGingybeardMan they reckon they've gotta take the primary off... Kidding em selves.
@TheGingybeardMan
4 жыл бұрын
@@asexydeath man as you can see in my vid their is no need at all to take the primary off. They're trying to make a quid off of you.
@TheKellisunshyne
6 ай бұрын
Really good video, thank you.🎉
@Jcrause
3 жыл бұрын
Thanks, your video is the best walkthrough on KZitem for the streetbob it really helped me out keep up the awesome videos.
@TheGingybeardMan
3 жыл бұрын
Thanks mate, great to hear the vid helped 👍
@Crookedriverhooligan
3 ай бұрын
Definitely on my “ to do list” list. Don’t care for the mid controls. Good video 🤘🏻. Just bought my 2023 street bob 114.
@juanantoniomanriquerivas8141
2 жыл бұрын
hello, can you pass the link of the product... the link of the advanced controls. Thank you
@TheGingybeardMan
2 жыл бұрын
The website I bought them off no longer has them in stock. They are the harley davidson brand forward controls. Google search that and they should pop up 👍
@joec2174
4 ай бұрын
Did you find the foot peg mounts won’t accept aftermarket floor boards?
@TheGingybeardMan
3 ай бұрын
Sorry mate I'm unsure I never tried aftermarket floor boards
@ShahrukhKhan-vl6vv
Жыл бұрын
Thanku soo much from india
@davidmurray9193
3 ай бұрын
Help half way through putting forwards on but I'm stuck on my UK 22 street bob, what size is the Allen keys for the two bolts on the gear shift rods and the tool and size you used to get the gear rod at the back of the casing, can't ride till it's done none of my tools fit
@TheGingybeardMan
3 ай бұрын
Mate I did this video 4 years ago. I can't for the life if me remember what size allen keys I used.
@davidmurray9193
3 ай бұрын
Lol no worries worth a try 😁😁😁😁😁😁😁😁😁
@colinoz
2 жыл бұрын
Awesome! You made that look so easy. I'm 6'1 and need this forward control set up on my Softail standard.
@ryanforster4038
Жыл бұрын
Is there not a hole on the internal side of that primary casing where the selector rod was poked through? Will that hit cause dirt to build up inside the casing or was the rod hole a tube which is sealed off from the inside of the casing?
@TheGingybeardMan
Жыл бұрын
No sir, inside that hole sits a steel insert which runs through to the otherside of the primary. This prevents any dirt from going into the primary housing. The small cap provided with the forward control kit is only for aesthetic purposes to cover the hole on the outside of the primary.
@ryanforster4038
Жыл бұрын
@@TheGingybeardMan yeah sweet so it’s a sealed tube separated from the casing, awesome man, I’ll be around asking plenty of questions!
@lenBrill1971
2 жыл бұрын
Dude, you rock. Your vid saved me a huge amount of time. 🇨🇦👍🍺
@JuanVidalHaces
2 жыл бұрын
hello. First of all thank you very much for the video. It has been a great help to me and I have been encouraged to install the advanced controls myself. I noticed that your Street Bob is wearing a fairing/dome. can you tell me where to get it? brand and model? I'm looking for something like this in Spain and I can't find anything. thanks for your answer.
@TheGingybeardMan
2 жыл бұрын
I bought that fiairng from a company called Memphis shades in America. The fairing i have is called the Memphis shades gauntlet fairing.
@JuanVidalHaces
2 жыл бұрын
@@TheGingybeardMan Thank you very much for the reply. I am going to see if it can be bought and sent to and from Spain. greetings and congratulations for the channel.
@jimmybe64
4 жыл бұрын
I was wondering about the open hole on the engine side of the primary case where mid control shaft went through. Didn't see you plug it.
@TheGingybeardMan
4 жыл бұрын
No need to plug it as there is a steel sleeve which runs through the primary so dirt and debris can't fall into the primary. The plug is purely for aesthetics
@jimmybe64
4 жыл бұрын
@@TheGingybeardMan okay.
@jimmybe64
4 жыл бұрын
If you get a chance check out my short videos
@ShahrukhKhan-vl6vv
Жыл бұрын
U dont know bro iam soo thankfull to u love from india
@TheGingybeardMan
Жыл бұрын
Glad the video could help 🤘
@justintraupel9468
2 жыл бұрын
What size Allen wrenches and torque wrenches did you need?
@irf888
7 ай бұрын
Awesome instructions and video. Thanks.
@mikevanderiet
2 жыл бұрын
hey man does your bike have ABS? if so were there any problems? ive just bought a 2019 street bob, and i want to put forward controls on, the dealer is telling me that only they can put them on as the ABS needs to be bled. i find this hard to believe.. the install of forward controls does not look overly difficult.. ( i have done it already to my sporty).
@TheGingybeardMan
2 жыл бұрын
Yes man my bike has ABS. The dealership is telling you porky pies (lies) there is no need to bleed your Abs. All you are doing is repositioning the master cylinder. there is no chance of air getting into the brake system.
@bobdetrick6757
Жыл бұрын
awesome video helped me with my installation thank you
@frankvallee910
Жыл бұрын
Thanks man!
@davidhuber2679
3 жыл бұрын
Best video I have seen on your install!!! PS Thank you.
@DocRob316
Жыл бұрын
I need some advise, I’m currently in the middle of installing forward controls on my 2019 street bob but the bolts that support my current control mounts are stripped to hell and no bolt removal kit seems to work. Any ideas on how I can remove those tight bastards?
@jgar9726
2 жыл бұрын
Just curious, what brand controls did you purchase. I'm having trouble finding quality controls
@TheGingybeardMan
2 жыл бұрын
I bought the harley brand forward controls
@clintonharris914
Жыл бұрын
How did you remove your passenger pegs? I’m having hell.
@TheGingybeardMan
Жыл бұрын
My bike didn't come with passenger pegs from the factory.
@clintonharris914
Жыл бұрын
@@TheGingybeardMan okay thank you!
@MotoBeardLA
4 жыл бұрын
Hey there, just wanna to know what tool and size did you use to remove the footpeg. I tried to remove it with a socket wrench and a T45 bit.
@TheGingybeardMan
4 жыл бұрын
I believe I used a T45 wrench. I had no issues with loosening the bolts but have heard a few people have had issues. If it's particularly tight I'd recommend applying heat to the bolt by using a blow torch or heat gun, that'll loosen the loctight 👍
@colinoz
2 жыл бұрын
Got the chrome set and they're awesome. So much more comfortable being 6'1. Only issue is the chrome primary cosmetic plug doesn't fit! Typical, the very last part doesn't fit..
@TheGingybeardMan
2 жыл бұрын
Nice one man 🤟. Thats a shame, I guess I was lucky that my primary plug fit.
@colinoz
2 жыл бұрын
@@TheGingybeardMan yeah the chrome kit has a different plug than the black kit 🤔 Nothing a dab of silicone didn't fix. But the forward controls are great!
@arose636
2 жыл бұрын
Would that be suitable for someone who’s 5’7😂❓
@TheGingybeardMan
2 жыл бұрын
Id say if you find the mid controls uncomfortable at your height than these forwards would definitely be better
@arose636
2 жыл бұрын
@@TheGingybeardMan Thanks for the advice. Always great videos Mate 😎💯
@nbafan9388
2 жыл бұрын
With all of the parts you install considering how long it takes to get to you due to your location it's hard to imagine parts you order that don't quite fit and you have to send them back. The whole process can test anyone's nerves.
@TheGingybeardMan
2 жыл бұрын
Tell me about it mate, have been stung a few times with parts that didn't fit.
@soulgivesoul07
3 жыл бұрын
The Harley guys told me installing forward controls was really involved so I’m letting them do it. After watching your vid I feel like they lied to me
@TheGingybeardMan
3 жыл бұрын
Yeah man, its not a tricky job at all. You just need the right tools and some patience
@danielreynolds3336
3 жыл бұрын
Is this the same on a 2010 street bob. I have watched a few videos and they are taking the primary and secondary covers off.
@TheGingybeardMan
3 жыл бұрын
The softail street bobs have a different derby cover and gasket than the dyna street bob but the install is the same, providing you have the parts for your model
@harfang8188
4 жыл бұрын
Have you got a picture of you, on the right side, in order to see the leg position / air filter? I have a cone heavy breath screamin eagle filter. I'm 180cm
@TheGingybeardMan
4 жыл бұрын
I've done a few videos on my channel with different air cleaners showing the leg positioning with the forward controls.
@johnnyjohnson993
2 жыл бұрын
Hey mate can you put spacers on the break pedal so it sticks out more? Find on my fxlrs it’s to close to the frame and a pain to use the foot break
@TheGingybeardMan
2 жыл бұрын
I honestly dnt know man. If you spaced it out you would also need a longer mounting bolt
@dannysin9950
3 жыл бұрын
Looks great man. How long did it take you to install them? And Is there anywhere else I can buy forward controls for Dyna street bob 2010. HD sounds very expensive. Thanks mate
@TheGingybeardMan
3 жыл бұрын
Thanks mate, it only took about an hour to install. Anuthing harley Davidson branded is expensive but it is quality stuff and lasts. That said I think you can buy cheap chinese forwards off eBay 👍
@CyFi444
Жыл бұрын
@TheGingybeardMan Are those the OEM mini ape bars? If so, how do you like them with the forwads? I have a 2021 softail streetbob and I want to get forwards but not sure if I will need to get new bars/adjust to accomadte the new more leaned back position. Great video and directions btw! Thanks!
@TheGingybeardMan
Жыл бұрын
Yes sir. The bike had the stock apes fitted. I didn't feel like I had to reach for them with the forward controls. And even if you find yourself reaching for the bars after installing forwards you can just loosen the four mounting bolts on the riser clamp and roll the bars back to suit your riding position.
@CyFi444
Жыл бұрын
@@TheGingybeardMan Cheers!
@VaughnDingus
Жыл бұрын
I bought a 2018 used and I’m going from forwards to mids and this has been a big help. Thanks.
@TheGingybeardMan
Жыл бұрын
Awesome, great to hear mate 👍
@noahperius8291
Жыл бұрын
Do you know if the process is similar when reverting back to mids? I don’t want to have to open the primary but I want to go back to the mids
@TheGingybeardMan
Жыл бұрын
Yes mate it's the exact same process in reverse. There will be no need to open the primary the gear selector shaft slides straight through the hole in the primary
@noahperius8291
Жыл бұрын
@@TheGingybeardMan awesome! Thanks for the reply!
@noahperius8291
Жыл бұрын
The Harley dealership originally told me that it would cost me $318 and that they would have to remove the primary
@TheGingybeardMan
Жыл бұрын
@@noahperius8291 they say this nonsense to charge you a small fortune. Everything you need to know is in my vid brother.
@noahperius8291
Жыл бұрын
@@TheGingybeardMan they’ll try to get you any way they can, thanks for the awesome video!
@ladr21
3 жыл бұрын
What height person do you think would work well with with the forward controls. I want to go from mid to forward but I don't want to be stretching out too far.
@TheGingybeardMan
3 жыл бұрын
I'm 5 foot 9 inches tall and they're perfect for my height. I've heard they also suit people who are even 5 foot 6 tall.
@ceec6923
4 жыл бұрын
Great video bro ! Always looking forward to this epic videos
@bjoernrider6164
4 жыл бұрын
Cool tutorial. How tall are You?
@TheGingybeardMan
4 жыл бұрын
I'm 5 foot 9 inches tall
@estherwalker5759
3 жыл бұрын
Awesome vid. Just installed my forwards using this video. Thank you, saved me £££££££££
@TheGingybeardMan
3 жыл бұрын
Great to hear mate 👍
@InertiaFpv23
3 жыл бұрын
Amazing video thank you 🙏
@mertgumru7722
4 жыл бұрын
Great video man, I would be so appreciated if you can give me the list of the tools that you use to disassemble the parts you changed. Thank you ✌
@TheGingybeardMan
4 жыл бұрын
Apologies mate, It was a while ago that I did the install and I can't remember what size torx bits, sockets and hex bits I used. If however you have a decent tool kit it should get you by.
@lakeithlewis1343
9 ай бұрын
Thanks man. Took it step by step. Better than the instruction book.
@TheGingybeardMan
9 ай бұрын
Thanks brother 🙏
@rider14mcd63
4 жыл бұрын
Was there not a hole on the inside of the inner primary where the shifter shaft went through?
@TheGingybeardMan
4 жыл бұрын
Correct there is a hole which goes through both the inner and outter side of the primary. However there is a steel sleeve inside the hole which prevents anything from getting into the primary.
@alexdodds8256
4 жыл бұрын
Did fitting the forward controls address the issue you were having with upshifting to second? I've got a 2019 Street Bob and i'm having similar issues but while down shifting into to second.
@TheGingybeardMan
4 жыл бұрын
The issue I was having with shifting into second stopped after the dealership replaced the transmission oil with synth 3 harley oil. I Also lowered my gear shift lever and the issue went away. That's when I still had mid controls fitted 👍
@alexdodds8256
4 жыл бұрын
@@TheGingybeardMan Thanks for the swift reply. I will persevere with it for now and see what happens after it's first service and will adjust the shift lever. I'm looking to put forward controls on this year, so I really appreciate your video. Ride safe dude your bike looks awesome.
@dkelli6020
4 жыл бұрын
Gotta thank you for making this, I did it today and your vid was far more helpful than the instructions. They must’ve watched your vid because my kit came with a black button for the primary case. Only weird thing is the way the clutch linkage connects at an angle. That was sloppy design on their part. Thanks again! 🤙🏽
@TheGingybeardMan
4 жыл бұрын
I thought the same thing with the angle of the gear selector linkage, glad the vid could you mate 🤙🤙
@anthonymarino8870
Жыл бұрын
Excellent thanks very much appreciated
@TheGingybeardMan
Жыл бұрын
Happy to hear the vid helped 👍
@abefroeman100
4 жыл бұрын
Nice work, man. I also have forward controls and a saddleman step up seat on my FXBB. I am 5'8", and after an hour of riding my back starts to hurt because of the position of my stock bars. My question is, do you feel like the Bung King risers place the bars closer or further away from you? I know they make a pullback version of those risers, but I am wondering what your thoughts are?
@TheGingybeardMan
4 жыл бұрын
It's hard to say if the bung king risers have as much pullback as the stock bars, because the position of the stock bars are set by your dealership upon unboxing. The stock bars can be moved backwards and forwards so in theory our bars could have different positioning on purchase. I will say however the bung king risers and Cr high bend bars give a height increase of 2 inches so I now sit more upright, which is better for my back on long rides. I noticed when I changed to my whiplash slipstream seat from the saddleman seat I have to reach forward more for the bars as the slipstream seat sits me back further. Hope this helps.
@abefroeman100
4 жыл бұрын
@@TheGingybeardMan True, I could adjust the stock bars, but I try to keep them inline with the forks. Good point about them being higher than stock, which causes you to sit up a little more. I'll probably go with a 10 inch riser, 1 inch pull back.
@kenster007
Жыл бұрын
Thanks Gingy-Got the softail 2 days ago and picked up my kit today from HD. Looks pretty straight forward. The OEM kit is pricey as you said- $575, too many bad reviews on the aftermarket kits for me to go that route . This will be the first upgrade as old reconstructed knees don't like mid controls at all. Love the orange logo on the tank.
@TheGingybeardMan
Жыл бұрын
Nice one hope the install goes smoothly for you mate. I Have had a few people say the mounting torx bolts can be a pain to get out and the head of the bolts get stripped easily. Make sure you use the correct size torx wrench.
@kenster007
Жыл бұрын
@@TheGingybeardMan Ran out of daylight yesterday after work so only the brake side is complete. Took about an hour since I had to take the crash bar off. No issues but I got more from your video than the instructions provided. Hit the other one tonight-Cheers mate. Anyone want to buy an "as new/butt ugly crash guard" ?
@kenster007
Жыл бұрын
@@TheGingybeardMan All sorted, left side was easier than the right. Shift lever bolt down below needs your full attention, strip that one and you're probably taking the primary cover off. Forward controls are a dream. Love your passion for the bikes buddy.
@TheGingybeardMan
Жыл бұрын
@@kenster007 great to hear mate, glad the install went smoothly and the vid was able to help you out.
@leobrowneyes7683
2 жыл бұрын
Great video. You talked about Allan bolts to remove the footbracket. I have Torx bolts in there so why would that be? Still wondering if it's T40 or T45, the damn screws won't come off.
@TheGingybeardMan
2 жыл бұрын
I may have mispronounced it man, they should be torx bolts.I cant remember what size it was so long ago.
@leobrowneyes7683
2 жыл бұрын
@@TheGingybeardMan Did you use T40 or T45?
@leobrowneyes7683
2 жыл бұрын
@@TheGingybeardMan Sorry I reacted too quickly LOL
@TheGingybeardMan
2 жыл бұрын
@@leobrowneyes7683 sorry brother I can't recall was so long ago I did this vid.
@wolfsburggti4476
4 жыл бұрын
Can someone who’s 6’5 fit on the bike with forwards?
@TheGingybeardMan
4 жыл бұрын
No doubt you could fit but I think the ride would still be a little cramped. I believe you can get forward extensions though 👍
@MichaelSmith-lf6yc
2 жыл бұрын
What size is the bolt behind the drive line
@TheGingybeardMan
2 жыл бұрын
I have no idea mate, I did this video 2 years ago.
@MichaelSmith-lf6yc
2 жыл бұрын
@@TheGingybeardMan wow didn’t realize that 😂. Thanks for getting back to me though
@TheGingybeardMan
2 жыл бұрын
@@MichaelSmith-lf6yc wish I could help mate but I sold the bike a little while ago aswell
@aweandthensome
3 жыл бұрын
Will these work with an engine guard/crash bar?
@TheGingybeardMan
3 жыл бұрын
I'm not too sure mate
@Jojokillah808
3 жыл бұрын
I just installed mine then i saw this video. Nicely done. Good video
@TheGingybeardMan
3 жыл бұрын
Thanks mate 👍
@tookewlGU
4 жыл бұрын
Great walkthrough vid!
@thelaxbrochill
4 жыл бұрын
Hey man nice video, but before I start doing this I have a dumb question. Is this the same installation for the 2020 street bob?
@TheGingybeardMan
4 жыл бұрын
Yes sir they're the exact same, they havnt changed from 2018 👍
@Bigglouie
3 жыл бұрын
@@TheGingybeardMan what about 2021?
@TheGingybeardMan
3 жыл бұрын
@@Bigglouie yes mate, the 2021 is the exact same frame also
@gorion70
4 жыл бұрын
Thanks for the vid. doing this today on my fxlr. How do you like the quarter fairing?
@TheGingybeardMan
4 жыл бұрын
I like the look of the memphis shades gauntlet fairing as it suits the club style look, however it doesnt provide much wind protection. Ive changed my bars to ape hangers so I won't be running a fairing anymore as im going for a different look 🖒
@gorion70
4 жыл бұрын
@@TheGingybeardMan Nice. That's funny, when I purchased the forward controls I ordered the HD Fat Mini Apes with all the associated parts I need to install. Hoping to have them in about 2 weeks.
@aweandthensome
3 жыл бұрын
Saved me $450 USD. Thanks!
@TheGingybeardMan
3 жыл бұрын
Great to hear mate 👍
@charlesscharfy6607
2 жыл бұрын
Thank you for the video, what seat is that and do you like it?
@TheGingybeardMan
2 жыл бұрын
Thanks, its called the saddlemen step up seat. I did a review video of it on my channel 👍 its a great seat
@charlesscharfy6607
2 жыл бұрын
@@TheGingybeardMan thank you
@omaribrahim5995
3 жыл бұрын
Is this the kit from Harley ?
@TheGingybeardMan
3 жыл бұрын
Sure is
@adidepti0
4 жыл бұрын
Much better
@not_a_street_bob
4 жыл бұрын
So only 1 plug for the primary??? Leaves a hole on the inside for dust n crap to get into the primary Seems a bit stupid?
@rebel_ltz
4 жыл бұрын
It's not a hole but a closed tube across the primary covers. Dirt can't get into the primary.
@TheGingybeardMan
4 жыл бұрын
@Aus Street bob Yep what Tom said ^^
@not_a_street_bob
4 жыл бұрын
@@TheGingybeardMan ah makes sense All good then with 1 plug
@TheGingybeardMan
4 жыл бұрын
@@not_a_street_bob I thought the same thing man I had to double check 👍
@rider14mcd63
4 жыл бұрын
@@TheGingybeardMan answer to my question! Good install! About 500.00 US Dollars.
@charleyrider9775
3 жыл бұрын
Good video, nicely done sir.
@TheGingybeardMan
3 жыл бұрын
Thanks mate 👍
@ninbg
3 жыл бұрын
Where’d you get them?
@TheGingybeardMan
3 жыл бұрын
From the Australian Harley Heaven website
@objinformation
3 жыл бұрын
Are you running a different gas tank?
@TheGingybeardMan
3 жыл бұрын
I updated the tank in more recent videos but in this vid its the stock tank.
@objinformation
3 жыл бұрын
@@TheGingybeardMan thanks for getting back! Yeah I did end up finding that vid solid. How do you like having the larger tank? I was trying to see if the low riders tank would fit our bike. Seems no one has done it. Currently you appear to be the only one on YT that did a swap here.
@TheGingybeardMan
3 жыл бұрын
@@objinformation any softail tank from 2018 up will fit our bikes as they all have the exact same frames. The larger tank is one of my favourite mods I've done to the bike 👍
@josephjarrett2456
4 жыл бұрын
Is the bike in neutral?
@TheGingybeardMan
4 жыл бұрын
Yes mate the bike was in neutral
@Faileduserattempt
4 жыл бұрын
How tall are you?
@TheGingybeardMan
4 жыл бұрын
I'm 5 foot 9 inches tall
@shadowgamer7
4 жыл бұрын
Is there a specific tool kit you'd reccomend getting to do this? I am going to install the forward controls, a fairing, saddlebags and im just curious if theres a kit that will have all the tools I need to get this all done. 2018 street bob*
@TheGingybeardMan
4 жыл бұрын
Hey mate there is no particular kit that I can recommend. I have a pretty extensive tool kit myself which cost over $1800 and includes everything I need to enable me to do all jobs. Everything from wrenches, screwdrivers, hex sockets, torx sockets, soldering iron, pliers you name it. I've used all these tools on my bike at one time or another. For the jobs you want to do I'd say purchase a standard 40 set of sockets which includes both imperial/metric bits, purchase a torx socket set and hex socket set, also a decent set of wrenches including both metric and /imperial wrenches. With the use of my ratchets for the sockets I also used extensions to help with the hard to reach places and to assist with leverage on particularly tight bolts which have loctight on them. Mates it's very hard to list the exact tools and sizes of sockets I've used as I have everything needed and can't remember exactly as I did the mods a while ago now. If you do purchase some tools make sure you're confident with using them as I'd hate for you to damage your bike mate 👍
@pemisife
4 жыл бұрын
750 AU$ or US$?
@rebel_ltz
4 жыл бұрын
AU
@pemisife
4 жыл бұрын
No way!?!?!?!? Here in Portugal cost about 800€ / 1400 AU$
@rebel_ltz
4 жыл бұрын
@@pemisife From Harley?
@pemisife
4 жыл бұрын
Yes, HD Lisbon 803,54€ and must be ordered, not in stock They really burn the market here...
@TheGingybeardMan
4 жыл бұрын
Yes mate thats Australian dollars, Thought the Aus accent may have given it away.
Пікірлер: 181